Flooring Installation Cost Calculator — Massachusetts

Average flooring installation cost in Massachusetts: $6,747 (typical range $5,937–$7,759, $11 per sq ft). Enter your own sizes below for an itemized estimate. Updated November 2026

Loading calculator…

How much does a flooring installation cost in Massachusetts?

Based on current Massachusetts labor rates and material prices, a typical flooring installation costs about $6,747. Most projects fall between $5,937 and $7,759, or roughly $11 per sq ft. This example assumes: area 600 sq ft, flooring Luxury vinyl plank, removal Carpet + pad, prep Spot leveling.

Cost by finish level

Finish levelEstimated costTypical range
Economy (budget)$5,422$4,771 – $6,235
Standard (mid-range)$6,747$5,937 – $7,759
Premium (high-end)$9,091$8,000 – $10,455

Cost by project size

Project sizeEstimated cost
300 sq ft$3,691
600 sq ft$6,747
1,200 sq ft$13,322

Where the money goes

  • Flooring$3,892 (75%)
  • Removal$822 (16%)
  • Subfloor preparation$487 (9%)

Materials $2,688 · Labor $2,181 (30 hours) · Equipment, disposal & permits $332 — before contingency, contractor overhead & profit and tax.

Massachusetts vs. United States average

A typical flooring installation in Massachusetts costs 16% more than the United States average ($6,747 vs. $5,816). The difference comes mainly from local wages — a carpenter earns on average $38.31 per hour in Massachusetts — and from regional material prices and Sales tax (materials) of 6.25%.

Flooring Installation in Massachusetts: local factors

Massachusetts ranks 3rd of 51 states for flooring installation cost (1 = most expensive) — among the most expensive.

Nearby stateTypical costvs. Massachusetts
Massachusetts$6,747—
Connecticut$5,997-11%
New Hampshire$5,780-14%
New York$6,554-3%
Rhode Island$6,242-7%
Vermont$5,931-12%

Permits & contractor licensing in Massachusetts

  • Contractor license: Home improvement contractors must register with the state (HIC), and structural work needs a Construction Supervisor License (CSL).
  • Building code: The Massachusetts State Building Code applies statewide; many towns use the stretch or specialized energy code.
  • Permits: Permits are issued by the city or town building department.

Verify a contractor: Massachusetts Office of Consumer Affairs – HIC program ↗. Rules change — always confirm with your local building department.

Labor rates for this project in Massachusetts

TradeHoursAvg. wage / hourInstalled rate / hour
Floor layer19$36.93$73.86
Construction laborer11$34.05$68.10
  • Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
  • Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.

What a flooring installation includes

Flooring installation includes removing the old floor, subfloor preparation, the flooring with waste allowance, underlayment, transitions and labor. Tile and site-finished hardwood take the most labor.

Main cost factors

  • Floor area
  • Flooring type
  • Old floor removal
  • Subfloor leveling
  • Baseboards and stairs

How to save money

  • Luxury vinyl plank is waterproof and DIY-friendly.
  • Order 8–10% extra for cuts and future repairs.
  • Let wood and laminate acclimate 48 hours before install.
  • A flat subfloor is the key to a quiet, long-lasting floor.

Timeline

1–3 days for 600 sq ft (longer for tile and site-finished wood).

Permits

No permit is usually required.

Frequently asked questions

How much does a flooring installation cost in Massachusetts?

A typical flooring installation in Massachusetts costs about $6,747, with most projects between $5,937 and $7,759. Economy finishes start around $5,422 and premium projects reach $9,091. That is about $11 per sq ft.

How much of the cost is labor?

Labor is about 42% of the direct cost (30 work hours) for a typical project in Massachusetts. Materials are $2,688 and equipment, disposal and permits $332, before contingency, contractor overhead and tax.

Is a flooring installation cheaper in Massachusetts than in nearby states?

A typical flooring installation costs $6,747 in Massachusetts. Among nearby states, New Hampshire is the lowest at $5,780 and New York the highest at $6,554. Differences come mostly from local wages, material prices and taxes.

Do I need a licensed contractor in Massachusetts?

Home improvement contractors must register with the state (HIC), and structural work needs a Construction Supervisor License (CSL).

How long does a flooring installation take?

1–3 days for 600 sq ft (longer for tile and site-finished wood).

Do I need a permit for a flooring installation?

No permit is usually required.

What is the cheapest flooring to install?

Laminate and vinyl plank have the lowest installed cost per square foot.

Can new flooring go over old floors?

Floating floors can go over flat, solid floors; carpet must always be removed.

Can I change the contractor markup or contingency?

Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.

Flooring Installation cost in other states

Compare flooring installation costs in every state, province and territory →

More cost calculators for Massachusetts

Choose your location

AL AlabamaAK AlaskaAZ ArizonaAR ArkansasCA CaliforniaCO ColoradoCT ConnecticutDE DelawareDC District of ColumbiaFL FloridaGA GeorgiaHI HawaiiID IdahoIL IllinoisIN IndianaIA IowaKS KansasKY KentuckyLA LouisianaME MaineMD MarylandMA MassachusettsMI MichiganMN MinnesotaMS MississippiMO MissouriMT MontanaNE NebraskaNV NevadaNH New HampshireNJ New JerseyNM New MexicoNY New YorkNC North CarolinaND North DakotaOH OhioOK OklahomaOR OregonPA PennsylvaniaRI Rhode IslandSC South CarolinaSD South DakotaTN TennesseeTX TexasUT UtahVT VermontVA VirginiaWA WashingtonWV West VirginiaWI WisconsinWY Wyoming