Electrical Rewiring & Panel Cost Calculator — Massachusetts
Average electrical rewiring & panel cost in Massachusetts: $32,120 (typical range $28,266–$36,938, $18 per sq ft). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
How much does a electrical rewiring & panel cost in Massachusetts?
Based on current Massachusetts labor rates and material prices, a typical electrical rewiring & panel costs about $32,120. Most projects fall between $28,266 and $36,938, or roughly $18 per sq ft. This example assumes: home size 1,800 sq ft, scope Full rewire, panel 200 A, ev charger No.
Cost by project size
| Project size | Estimated cost |
|---|---|
| 900 sq ft | $18,997 |
| 1,800 sq ft | $32,120 |
| 3,600 sq ft | $58,366 |
Where the money goes
- Rewiring$15,596 (62%)
- Wall repair$4,608 (18%)
- Service & panel$3,467 (14%)
- Extras$1,019 (4%)
- Permit & inspection$348 (1%)
Materials $7,151 · Labor $17,301 (230 hours) · Equipment, disposal & permits $585 — before contingency, contractor overhead & profit and tax.
Massachusetts vs. United States average
A typical electrical rewiring & panel in Massachusetts costs 11% more than the United States average ($32,120 vs. $28,860). The difference comes mainly from local wages — a carpenter earns on average $38.31 per hour in Massachusetts — and from regional material prices and Sales tax (materials) of 6.25%.
Electrical Rewiring & Panel in Massachusetts: local factors
Massachusetts ranks 10th of 51 states for electrical rewiring & panel cost (1 = most expensive) — among the most expensive.
| Nearby state | Typical cost | vs. Massachusetts |
|---|---|---|
| Massachusetts | $32,120 | — |
| Connecticut | $30,646 | -5% |
| New Hampshire | $27,870 | -13% |
| New York | $32,884 | +2% |
| Rhode Island | $29,563 | -8% |
| Vermont | $29,214 | -9% |
Permits & contractor licensing in Massachusetts
- Contractor license: Home improvement contractors must register with the state (HIC), and structural work needs a Construction Supervisor License (CSL).
- Building code: The Massachusetts State Building Code applies statewide; many towns use the stretch or specialized energy code.
- Permits: Permits are issued by the city or town building department.
Verify a contractor: Massachusetts Office of Consumer Affairs – HIC program ↗. Rules change — always confirm with your local building department.
Labor rates for this project in Massachusetts
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Electrician | 171 | $39.21 | $78.42 |
| Drywall installer | 60 | $32.80 | $65.60 |
- Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
- Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.
What a electrical rewiring & panel includes
Rewiring includes a new panel and service, new circuits fished through walls, outlets, switches and detectors, plus patching the access holes. Plaster walls take longer than drywall.
Main cost factors
- Home size
- Panel size
- Full or partial rewire
- Wall repair after rewiring
- EV charger
How to save money
- Upgrade to a 200 A panel if you plan an EV charger, heat pump or induction cooking.
- Do rewiring before painting and flooring.
- Add outlets and USB-C receptacles while walls are open.
- Whole-home surge protection is inexpensive insurance.
Timeline
3–10 days for a full rewire.
Permits
Electrical permits and inspections are always required; utility coordination is needed for service upgrades.
Frequently asked questions
How much does a electrical rewiring & panel cost in Massachusetts?
A typical electrical rewiring & panel in Massachusetts costs about $32,120, with most projects between $28,266 and $36,938. That is about $18 per sq ft.
How much of the cost is labor?
Labor is about 69% of the direct cost (230 work hours) for a typical project in Massachusetts. Materials are $7,151 and equipment, disposal and permits $585, before contingency, contractor overhead and tax.
Is a electrical rewiring & panel cheaper in Massachusetts than in nearby states?
A typical electrical rewiring & panel costs $32,120 in Massachusetts. Among nearby states, New Hampshire is the lowest at $27,870 and New York the highest at $32,884. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in Massachusetts?
Home improvement contractors must register with the state (HIC), and structural work needs a Construction Supervisor License (CSL).
How long does a electrical rewiring & panel take?
3–10 days for a full rewire.
Do I need a permit for a electrical rewiring & panel?
Electrical permits and inspections are always required; utility coordination is needed for service upgrades.
Do I need to rewire an old house?
Homes with knob-and-tube, aluminum branch wiring or a fuse box are strong candidates.
How much does a panel upgrade cost?
Choose “Panel upgrade only” to see just the panel and service cost.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Electrical Rewiring & Panel cost in other states
Compare electrical rewiring & panel costs in every state, province and territory →