Wood & Vinyl Fence Cost Calculator — Alberta

Average wood & vinyl fence cost in Alberta: C$10,006 (typical range C$8,805–C$11,507, C$67 per linear foot). Enter your own sizes below for an itemized estimate. Updated November 2026

Loading calculator…

Free · No obligation

Get up to 3 free quotes from Alberta pros

  • Compare real prices with your estimate
  • Local, licensed and insured contractors
  • Takes 30 seconds — your estimate is attached

How much does a wood & vinyl fence cost in Alberta?

Based on current Alberta labor rates and material prices, a typical wood & vinyl fence costs about C$10,006. Most projects fall between C$8,805 and C$11,507, or roughly C$67 per linear foot. This example assumes: length 150 ft, height 6 ft, material Pressure-treated pine, posts 21.

Cost by project size

Project sizeEstimated cost
75 ftC$5,799
150 ftC$10,006
300 ftC$18,566

Where the money goes

  • Rails & panelsC$4,679 (62%)
  • Posts & footingsC$1,856 (25%)
  • GatesC$514 (7%)
  • Permit & utility locateC$484 (6%)

Materials C$3,659 · Labor C$3,697 (54 hours) · Equipment, disposal & permits C$177 — before contingency, contractor overhead & profit and tax.

Alberta vs. Canada average

A typical wood & vinyl fence in Alberta costs 6% less than the Canada average (C$10,006 vs. C$10,641). The difference comes mainly from local wages — a carpenter earns on average C$40.17 per hour in Alberta — and from regional material prices and GST / HST / PST of 5%.

Wood & Vinyl Fence in Alberta: local factors

Alberta ranks 9th of 13 provinces and territories for wood & vinyl fence cost (1 = most expensive) — among the most affordable.

Nearby regionTypical costvs. Alberta
AlbertaC$10,006—
British ColumbiaC$11,190+12%
SaskatchewanC$9,924-1%
Northwest TerritoriesC$13,111+31%

What affects the price in Alberta

  • Deep frost: Posts and footings must go below the frost line — usually 42–60 in. (1.1–1.5 m) here — which means more digging and concrete per post.
  • Wildfire risk: Decks and fences attached to the house may need ignition-resistant or non-combustible materials near the walls.

Permits & contractor licensing in Alberta

  • Contractor license: Contractor licensing in Alberta is mostly handled by municipalities, and trades such as electricians and plumbers need provincial certification.
  • Building code: Work must meet the building code adopted in Alberta (based on the National Building Code of Canada).
  • Permits: Building permits are issued by your municipality.

Rules vary by city — always confirm with your local building department before work starts.

Labor rates for this project in Alberta

TradeHoursAvg. wage / hourInstalled rate / hour
Fence erector54C$34.14C$68.28
  • Labor wages: Statistics Canada, Table 14-10-0063-01 — average hourly wage, construction industry, by province (monthly) — data period October 2026, last checked November 21, 2026.
  • Material prices & exchange rate: North American average material prices converted with European Central Bank reference rates (Frankfurter API) and a regional price factor — data period 2026-11-20, last checked November 21, 2026.

What a wood & vinyl fence includes

Fence cost is driven by length, height, material and gates. Posts set in concrete every 8 ft, rails and pickets or panels make up the materials; labor is mostly digging and setting posts.

Main cost factors

  • Fence length and height
  • Material (pine, cedar, vinyl)
  • Style
  • Number of gates
  • Old fence removal

How to save money

  • Pressure-treated pine is the cheapest; cedar resists rot naturally.
  • Vinyl costs more up front but never needs staining.
  • Share the cost with neighbors on property-line fences.
  • Call your utility locate service before digging.

Timeline

2–4 days for 150 ft.

Permits

Many cities require a permit for fences over 6 ft; HOAs may have style rules.

Frequently asked questions

How much does a wood & vinyl fence cost in Alberta?

A typical wood & vinyl fence in Alberta costs about C$10,006, with most projects between C$8,805 and C$11,507. That is about C$67 per linear foot.

How much of the cost is labor?

Labor is about 49% of the direct cost (54 work hours) for a typical project in Alberta. Materials are C$3,659 and equipment, disposal and permits C$177, before contingency, contractor overhead and tax.

Is a wood & vinyl fence cheaper in Alberta than in nearby regions?

A typical wood & vinyl fence costs C$10,006 in Alberta. Among nearby regions, Saskatchewan is the lowest at C$9,924 and Northwest Territories the highest at C$13,111. Differences come mostly from local wages, material prices and taxes.

Do I need a licensed contractor in Alberta?

Contractor licensing in Alberta is mostly handled by municipalities, and trades such as electricians and plumbers need provincial certification.

What local conditions affect wood & vinyl fence costs in Alberta?

Posts and footings must go below the frost line — usually 42–60 in. (1.1–1.5 m) here — which means more digging and concrete per post. Decks and fences attached to the house may need ignition-resistant or non-combustible materials near the walls.

How long does a wood & vinyl fence take?

2–4 days for 150 ft.

Do I need a permit for a wood & vinyl fence?

Many cities require a permit for fences over 6 ft; HOAs may have style rules.

How much does a fence cost per foot?

See the cost per linear foot (or metre) under the total.

How long does a wood fence last?

10–15 years for treated pine, 15–20 for cedar with regular sealing.

Can I change the contractor markup or contingency?

Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.

Wood & Vinyl Fence cost in other provinces

Compare wood & vinyl fence costs in every state, province and territory →

More cost calculators for Alberta

Choose your location

AB AlbertaBC British ColumbiaMB ManitobaNB New BrunswickNL Newfoundland and LabradorNS Nova ScotiaON OntarioPE Prince Edward IslandQC QuebecSK SaskatchewanYT YukonNT Northwest TerritoriesNU Nunavut