Concrete Driveway & Slab Cost Calculator — Alberta

Average concrete driveway & slab cost in Alberta: C$15,032 (typical range C$13,228–C$17,287, C$19 per sq ft). Enter your own sizes below for an itemized estimate. Updated November 2026

Loading calculator…

Free · No obligation

Get up to 3 free quotes from Alberta pros

  • Compare real prices with your estimate
  • Local, licensed and insured contractors
  • Takes 30 seconds — your estimate is attached

How much does a concrete driveway & slab cost in Alberta?

Based on current Alberta labor rates and material prices, a typical concrete driveway & slab costs about C$15,032. Most projects fall between C$13,228 and C$17,287, or roughly C$19 per sq ft. This example assumes: size 40 ft × 20 ft, area 800 sq ft, concrete 10.5 cu yd, thickness 4".

Cost by project size

Project sizeEstimated cost
20 × 10 ftC$4,696
24 × 24 ftC$11,494
40 × 20 ftC$15,032
50 × 24 ftC$22,150

Where the money goes

  • ConcreteC$7,555 (67%)
  • Base & formsC$3,541 (31%)
  • PermitC$221 (2%)

Materials C$5,368 · Labor C$4,881 (66 hours) · Equipment, disposal & permits C$1,068 — before contingency, contractor overhead & profit and tax.

Alberta vs. Canada average

A typical concrete driveway & slab in Alberta costs 6% less than the Canada average (C$15,032 vs. C$16,011). The difference comes mainly from local wages — a carpenter earns on average C$40.17 per hour in Alberta — and from regional material prices and GST / HST / PST of 5%.

Concrete Driveway & Slab in Alberta: local factors

Alberta ranks 10th of 13 provinces and territories for concrete driveway & slab cost (1 = most expensive) — among the most affordable.

Nearby regionTypical costvs. Alberta
AlbertaC$15,032—
British ColumbiaC$16,811+12%
SaskatchewanC$15,026-0%
Northwest TerritoriesC$19,783+32%

What affects the price in Alberta

  • Snow loads: Freeze–thaw cycles and de-icing salts call for air-entrained concrete, control joints and a thicker compacted base.

Permits & contractor licensing in Alberta

  • Contractor license: Contractor licensing in Alberta is mostly handled by municipalities, and trades such as electricians and plumbers need provincial certification.
  • Building code: Work must meet the building code adopted in Alberta (based on the National Building Code of Canada).
  • Permits: Building permits are issued by your municipality.

Rules vary by city — always confirm with your local building department before work starts.

Labor rates for this project in Alberta

TradeHoursAvg. wage / hourInstalled rate / hour
Cement mason / concrete finisher42C$39.37C$78.74
Construction laborer24C$32.14C$64.28
  • Labor wages: Statistics Canada, Table 14-10-0063-01 — average hourly wage, construction industry, by province (monthly) — data period October 2026, last checked November 21, 2026.
  • Material prices & exchange rate: North American average material prices converted with European Central Bank reference rates (Frankfurter API) and a regional price factor — data period 2026-11-20, last checked November 21, 2026.

What a concrete driveway & slab includes

Concrete flatwork costs depend on area, thickness, reinforcement and finish. A compacted gravel base, forms, ready-mix delivery and finishing labor are included; stamped and colored finishes add materials and time.

Main cost factors

  • Area and thickness
  • Reinforcement
  • Decorative finish
  • Removing old concrete
  • Access for the truck

How to save money

  • 5–6 inches thickness for driveways with heavy vehicles.
  • Small pours under ~8 cubic yards pay a short-load fee — combine projects.
  • Seal the concrete after curing to prevent salt and stain damage.
  • Control joints every 8–12 ft prevent random cracks.

Timeline

2–4 days, plus 7 days before driving on it.

Permits

Driveway and curb-cut permits are common; check before pouring.

Frequently asked questions

How much does a concrete driveway & slab cost in Alberta?

A typical concrete driveway & slab in Alberta costs about C$15,032, with most projects between C$13,228 and C$17,287. That is about C$19 per sq ft.

How much of the cost is labor?

Labor is about 43% of the direct cost (66 work hours) for a typical project in Alberta. Materials are C$5,368 and equipment, disposal and permits C$1,068, before contingency, contractor overhead and tax.

Is a concrete driveway & slab cheaper in Alberta than in nearby regions?

A typical concrete driveway & slab costs C$15,032 in Alberta. Among nearby regions, Saskatchewan is the lowest at C$15,026 and Northwest Territories the highest at C$19,783. Differences come mostly from local wages, material prices and taxes.

Do I need a licensed contractor in Alberta?

Contractor licensing in Alberta is mostly handled by municipalities, and trades such as electricians and plumbers need provincial certification.

What local conditions affect concrete driveway & slab costs in Alberta?

Freeze–thaw cycles and de-icing salts call for air-entrained concrete, control joints and a thicker compacted base.

How long does a concrete driveway & slab take?

2–4 days, plus 7 days before driving on it.

Do I need a permit for a concrete driveway & slab?

Driveway and curb-cut permits are common; check before pouring.

How many cubic yards do I need?

The breakdown shows the volume for your size and thickness with 6% extra.

Concrete or pavers?

Concrete is cheaper per square foot; pavers are easier to repair.

Can I change the contractor markup or contingency?

Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.

Concrete Driveway & Slab cost in other provinces

Compare concrete driveway & slab costs in every state, province and territory →

More cost calculators for Alberta

Choose your location

AB AlbertaBC British ColumbiaMB ManitobaNB New BrunswickNL Newfoundland and LabradorNS Nova ScotiaON OntarioPE Prince Edward IslandQC QuebecSK SaskatchewanYT YukonNT Northwest TerritoriesNU Nunavut