Concrete Driveway & Slab Cost Calculator — Yukon

Average concrete driveway & slab cost in Yukon: C$18,737 (typical range C$16,489–C$21,548, C$23 per sq ft). Enter your own sizes below for an itemized estimate. Updated November 2026

Loading calculator…

Free · No obligation

Get up to 3 free quotes from Yukon pros

  • Compare real prices with your estimate
  • Local, licensed and insured contractors
  • Takes 30 seconds — your estimate is attached

How much does a concrete driveway & slab cost in Yukon?

Based on current Yukon labor rates and material prices, a typical concrete driveway & slab costs about C$18,737. Most projects fall between C$16,489 and C$21,548, or roughly C$23 per sq ft. This example assumes: size 40 ft × 20 ft, area 800 sq ft, concrete 10.5 cu yd, thickness 4".

Cost by project size

Project sizeEstimated cost
20 × 10 ftC$5,886
24 × 24 ftC$14,351
40 × 20 ftC$18,737
50 × 24 ftC$27,594

Where the money goes

  • ConcreteC$9,411 (67%)
  • Base & formsC$4,413 (31%)
  • PermitC$283 (2%)

Materials C$6,879 · Labor C$5,858 (66 hours) · Equipment, disposal & permits C$1,369 — before contingency, contractor overhead & profit and tax.

Yukon vs. Canada average

A typical concrete driveway & slab in Yukon costs 17% more than the Canada average (C$18,737 vs. C$16,011). The difference comes mainly from local wages — a carpenter earns on average C$48.21 per hour in Yukon — and from regional material prices and GST / HST / PST of 5%.

Concrete Driveway & Slab in Yukon: local factors

Yukon ranks 3rd of 13 provinces and territories for concrete driveway & slab cost (1 = most expensive) — among the most expensive.

Nearby regionTypical costvs. Yukon
YukonC$18,737—
British ColumbiaC$16,811-10%
Northwest TerritoriesC$19,783+6%

What affects the price in Yukon

  • Snow loads: Freeze–thaw cycles and de-icing salts call for air-entrained concrete, control joints and a thicker compacted base.

Permits & contractor licensing in Yukon

  • Contractor license: Contractor licensing in Yukon is mostly handled by municipalities, and trades such as electricians and plumbers need provincial certification.
  • Building code: Work must meet the building code adopted in Yukon (based on the National Building Code of Canada).
  • Permits: Building permits are issued by your municipality.

Rules vary by city — always confirm with your local building department before work starts.

Labor rates for this project in Yukon

TradeHoursAvg. wage / hourInstalled rate / hour
Cement mason / concrete finisher42C$47.25C$94.50
Construction laborer24C$38.57C$77.14
  • Labor wages: Statistics Canada, Table 14-10-0063-01 — average hourly wage, construction industry, by province (monthly) — data period October 2026, last checked November 21, 2026.
  • Material prices & exchange rate: North American average material prices converted with European Central Bank reference rates (Frankfurter API) and a regional price factor — data period 2026-11-20, last checked November 21, 2026.

What a concrete driveway & slab includes

Concrete flatwork costs depend on area, thickness, reinforcement and finish. A compacted gravel base, forms, ready-mix delivery and finishing labor are included; stamped and colored finishes add materials and time.

Main cost factors

  • Area and thickness
  • Reinforcement
  • Decorative finish
  • Removing old concrete
  • Access for the truck

How to save money

  • 5–6 inches thickness for driveways with heavy vehicles.
  • Small pours under ~8 cubic yards pay a short-load fee — combine projects.
  • Seal the concrete after curing to prevent salt and stain damage.
  • Control joints every 8–12 ft prevent random cracks.

Timeline

2–4 days, plus 7 days before driving on it.

Permits

Driveway and curb-cut permits are common; check before pouring.

Frequently asked questions

How much does a concrete driveway & slab cost in Yukon?

A typical concrete driveway & slab in Yukon costs about C$18,737, with most projects between C$16,489 and C$21,548. That is about C$23 per sq ft.

How much of the cost is labor?

Labor is about 42% of the direct cost (66 work hours) for a typical project in Yukon. Materials are C$6,879 and equipment, disposal and permits C$1,369, before contingency, contractor overhead and tax.

Is a concrete driveway & slab cheaper in Yukon than in nearby regions?

A typical concrete driveway & slab costs C$18,737 in Yukon. Among nearby regions, British Columbia is the lowest at C$16,811 and Northwest Territories the highest at C$19,783. Differences come mostly from local wages, material prices and taxes.

Do I need a licensed contractor in Yukon?

Contractor licensing in Yukon is mostly handled by municipalities, and trades such as electricians and plumbers need provincial certification.

What local conditions affect concrete driveway & slab costs in Yukon?

Freeze–thaw cycles and de-icing salts call for air-entrained concrete, control joints and a thicker compacted base.

How long does a concrete driveway & slab take?

2–4 days, plus 7 days before driving on it.

Do I need a permit for a concrete driveway & slab?

Driveway and curb-cut permits are common; check before pouring.

How many cubic yards do I need?

The breakdown shows the volume for your size and thickness with 6% extra.

Concrete or pavers?

Concrete is cheaper per square foot; pavers are easier to repair.

Can I change the contractor markup or contingency?

Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.

Concrete Driveway & Slab cost in other provinces

Compare concrete driveway & slab costs in every state, province and territory →

More cost calculators for Yukon

Choose your location

AB AlbertaBC British ColumbiaMB ManitobaNB New BrunswickNL Newfoundland and LabradorNS Nova ScotiaON OntarioPE Prince Edward IslandQC QuebecSK SaskatchewanYT YukonNT Northwest TerritoriesNU Nunavut