Block Wall Fence Cost Calculator — Yukon
Average block wall fence cost in Yukon: C$36,301 (typical range C$31,945–C$41,746, C$363 per linear foot). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from Yukon pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a block wall fence cost in Yukon?
Based on current Yukon labor rates and material prices, a typical block wall fence costs about C$36,301. Most projects fall between C$31,945 and C$41,746, or roughly C$363 per linear foot. This example assumes: length 100 ft, height 6 ft, blocks 709, face area 600 sq ft.
Cost by project size
| Project size | Estimated cost |
|---|---|
| 50 ft | C$21,176 |
| 100 ft | C$36,301 |
| 200 ft | C$67,399 |
Where the money goes
- Block wallC$16,664 (61%)
- Excavation & footingC$7,181 (26%)
- GatesC$1,406 (5%)
- Permit & engineeringC$1,228 (4%)
- Cap & finishC$851 (3%)
Materials C$10,950 · Labor C$13,577 (152 hours) · Equipment, disposal & permits C$2,803 — before contingency, contractor overhead & profit and tax.
Yukon vs. Canada average
A typical block wall fence in Yukon costs 17% more than the Canada average (C$36,301 vs. C$31,119). The difference comes mainly from local wages — a carpenter earns on average C$48.21 per hour in Yukon — and from regional material prices and GST / HST / PST of 5%.
Block Wall Fence in Yukon: local factors
Yukon ranks 3rd of 13 provinces and territories for block wall fence cost (1 = most expensive) — among the most expensive.
| Nearby region | Typical cost | vs. Yukon |
|---|---|---|
| Yukon | C$36,301 | — |
| British Columbia | C$32,743 | -10% |
| Northwest Territories | C$38,296 | +5% |
What affects the price in Yukon
- Deep frost: Posts and footings must go below the frost line — usually 42–60 in. (1.1–1.5 m) here — which means more digging and concrete per post.
- Earthquake zone: Masonry walls need vertical rebar in grouted cells and an engineered footing in earthquake zones.
Permits & contractor licensing in Yukon
- Contractor license: Contractor licensing in Yukon is mostly handled by municipalities, and trades such as electricians and plumbers need provincial certification.
- Building code: Work must meet the building code adopted in Yukon (based on the National Building Code of Canada).
- Permits: Building permits are issued by your municipality.
Rules vary by city — always confirm with your local building department before work starts.
Labor rates for this project in Yukon
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Brick / block mason | 75 | C$49.18 | C$98.36 |
| Construction laborer | 65 | C$38.57 | C$77.14 |
| Cement mason / concrete finisher | 8 | C$47.25 | C$94.50 |
| Ironworker / welder | 4 | C$53.04 | C$106.08 |
- Labor wages: Statistics Canada, Table 14-10-0063-01 — average hourly wage, construction industry, by province (monthly) — data period October 2026, last checked November 21, 2026.
- Material prices & exchange rate: North American average material prices converted with European Central Bank reference rates (Frankfurter API) and a regional price factor — data period 2026-11-20, last checked November 21, 2026.
What a block wall fence includes
A concrete block (CMU) wall needs a reinforced footing, vertical rebar grouted into the cells, horizontal reinforcement, mortar and a cap. Stucco or paint finish adds cost and life. Walls over 4 ft often need engineering.
Main cost factors
- Wall length and height
- Block type
- Footing and rebar
- Pilasters and cap
- Stucco or paint finish
How to save money
- Closer rebar spacing is required in high-wind and seismic areas.
- Split-face block looks finished without stucco.
- Pilasters every 10–16 ft stiffen tall walls.
- Plan drainage behind walls that hold back soil.
Timeline
1–3 weeks depending on length.
Permits
Walls over 4 ft (or retaining walls) usually need a permit and engineered design.
Frequently asked questions
How much does a block wall fence cost in Yukon?
A typical block wall fence in Yukon costs about C$36,301, with most projects between C$31,945 and C$41,746. That is about C$363 per linear foot.
How much of the cost is labor?
Labor is about 50% of the direct cost (152 work hours) for a typical project in Yukon. Materials are C$10,950 and equipment, disposal and permits C$2,803, before contingency, contractor overhead and tax.
Is a block wall fence cheaper in Yukon than in nearby regions?
A typical block wall fence costs C$36,301 in Yukon. Among nearby regions, British Columbia is the lowest at C$32,743 and Northwest Territories the highest at C$38,296. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in Yukon?
Contractor licensing in Yukon is mostly handled by municipalities, and trades such as electricians and plumbers need provincial certification.
What local conditions affect block wall fence costs in Yukon?
Posts and footings must go below the frost line — usually 42–60 in. (1.1–1.5 m) here — which means more digging and concrete per post. Masonry walls need vertical rebar in grouted cells and an engineered footing in earthquake zones.
How long does a block wall fence take?
1–3 weeks depending on length.
Do I need a permit for a block wall fence?
Walls over 4 ft (or retaining walls) usually need a permit and engineered design.
How many blocks do I need?
The breakdown shows the block count (wall face area ÷ 0.89 sq ft per block + 5%).
Block wall or wood fence?
Block walls cost more but last 50+ years and block noise.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Block Wall Fence cost in other provinces
Compare block wall fence costs in every state, province and territory →