Paver Patio Cost Calculator — British Columbia
Average paver patio cost in British Columbia: C$10,353 (typical range C$9,111–C$11,906, C$35 per sq ft). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from British Columbia pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a paver patio cost in British Columbia?
Based on current British Columbia labor rates and material prices, a typical paver patio costs about C$10,353. Most projects fall between C$9,111 and C$11,906, or roughly C$35 per sq ft. This example assumes: patio area 300 sq ft, paver Concrete pavers, base 6".
Cost by project size
| Project size | Estimated cost |
|---|---|
| 150 sq ft | C$5,806 |
| 300 sq ft | C$10,353 |
| 600 sq ft | C$20,139 |
Where the money goes
- PaversC$4,089 (56%)
- ExcavationC$1,680 (23%)
- BaseC$1,539 (21%)
Materials C$3,257 · Labor C$2,729 (41 hours) · Equipment, disposal & permits C$1,321 — before contingency, contractor overhead & profit and tax.
British Columbia vs. Canada average
A typical paver patio in British Columbia costs 5% more than the Canada average (C$10,353 vs. C$9,875). The difference comes mainly from local wages — a carpenter earns on average C$42.11 per hour in British Columbia — and from regional material prices and GST / HST / PST of 12%.
Paver Patio in British Columbia: local factors
British Columbia ranks 4th of 13 provinces and territories for paver patio cost (1 = most expensive) — among the most expensive.
| Nearby region | Typical cost | vs. British Columbia |
|---|---|---|
| British Columbia | C$10,353 | — |
| Alberta | C$9,257 | -11% |
| Yukon | C$11,582 | +12% |
| Northwest Territories | C$12,237 | +18% |
What affects the price in British Columbia
- Snow loads: Freeze–thaw cycles and de-icing salts call for air-entrained concrete, control joints and a thicker compacted base.
Permits & contractor licensing in British Columbia
- Contractor license: Contractor licensing in British Columbia is mostly handled by municipalities, and trades such as electricians and plumbers need provincial certification.
- Building code: Work must meet the building code adopted in British Columbia (based on the National Building Code of Canada).
- Permits: Building permits are issued by your municipality.
Rules vary by city — always confirm with your local building department before work starts.
Labor rates for this project in British Columbia
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Landscaper / hardscape | 41 | C$33.69 | C$67.38 |
- Labor wages: Statistics Canada, Table 14-10-0063-01 — average hourly wage, construction industry, by province (monthly) — data period October 2026, last checked November 21, 2026.
- Material prices & exchange rate: North American average material prices converted with European Central Bank reference rates (Frankfurter API) and a regional price factor — data period 2026-11-20, last checked November 21, 2026.
What a paver patio includes
A paver patio is mostly excavation and base work: geotextile, crushed gravel, bedding sand, then the pavers, edge restraint and polymeric joint sand. A good base is what keeps pavers level for decades.
Main cost factors
- Patio area
- Paver type
- Base depth
- Borders and edging
- Steps or seat walls
How to save money
- Do not skimp on base depth on clay soils.
- Simple running-bond patterns waste less paver material.
- Permeable pavers can reduce storm-water fees in some cities.
- Seat walls and steps add the most cost per square foot.
Timeline
2–5 days.
Permits
Usually not required for ground-level patios; check lot coverage rules.
Frequently asked questions
How much does a paver patio cost in British Columbia?
A typical paver patio in British Columbia costs about C$10,353, with most projects between C$9,111 and C$11,906. That is about C$35 per sq ft.
How much of the cost is labor?
Labor is about 37% of the direct cost (41 work hours) for a typical project in British Columbia. Materials are C$3,257 and equipment, disposal and permits C$1,321, before contingency, contractor overhead and tax.
Is a paver patio cheaper in British Columbia than in nearby regions?
A typical paver patio costs C$10,353 in British Columbia. Among nearby regions, Alberta is the lowest at C$9,257 and Northwest Territories the highest at C$12,237. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in British Columbia?
Contractor licensing in British Columbia is mostly handled by municipalities, and trades such as electricians and plumbers need provincial certification.
What local conditions affect paver patio costs in British Columbia?
Freeze–thaw cycles and de-icing salts call for air-entrained concrete, control joints and a thicker compacted base.
How long does a paver patio take?
2–5 days.
Do I need a permit for a paver patio?
Usually not required for ground-level patios; check lot coverage rules.
How much base gravel do I need?
See the “Base” category for cubic yards for your base depth.
How long do paver patios last?
25–50 years with occasional re-sanding of joints.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Paver Patio cost in other provinces
Compare paver patio costs in every state, province and territory →