Paver Patio Cost Calculator — New Brunswick

Average paver patio cost in New Brunswick: C$9,477 (typical range C$8,340–C$10,899, C$32 per sq ft). Enter your own sizes below for an itemized estimate. Updated November 2026

Loading calculator…

Free · No obligation

Get up to 3 free quotes from New Brunswick pros

  • Compare real prices with your estimate
  • Local, licensed and insured contractors
  • Takes 30 seconds — your estimate is attached

How much does a paver patio cost in New Brunswick?

Based on current New Brunswick labor rates and material prices, a typical paver patio costs about C$9,477. Most projects fall between C$8,340 and C$10,899, or roughly C$32 per sq ft. This example assumes: patio area 300 sq ft, paver Concrete pavers, base 6".

Cost by project size

Project sizeEstimated cost
150 sq ftC$5,361
300 sq ftC$9,477
600 sq ftC$18,394

Where the money goes

  • PaversC$3,628 (56%)
  • ExcavationC$1,521 (23%)
  • BaseC$1,366 (21%)

Materials C$3,136 · Labor C$2,106 (41 hours) · Equipment, disposal & permits C$1,272 — before contingency, contractor overhead & profit and tax.

New Brunswick vs. Canada average

A typical paver patio in New Brunswick costs 4% less than the Canada average (C$9,477 vs. C$9,875). The difference comes mainly from local wages — a carpenter earns on average C$32.50 per hour in New Brunswick — and from regional material prices and GST / HST / PST of 15%.

Paver Patio in New Brunswick: local factors

New Brunswick ranks 9th of 13 provinces and territories for paver patio cost (1 = most expensive) — among the most affordable.

Nearby regionTypical costvs. New Brunswick
New BrunswickC$9,477—
Nova ScotiaC$9,692+2%
QuebecC$10,099+7%
Prince Edward IslandC$9,353-1%

What affects the price in New Brunswick

  • Snow loads: Freeze–thaw cycles and de-icing salts call for air-entrained concrete, control joints and a thicker compacted base.

Permits & contractor licensing in New Brunswick

  • Contractor license: Contractor licensing in New Brunswick is mostly handled by municipalities, and trades such as electricians and plumbers need provincial certification.
  • Building code: Work must meet the building code adopted in New Brunswick (based on the National Building Code of Canada).
  • Permits: Building permits are issued by your municipality.

Rules vary by city — always confirm with your local building department before work starts.

Labor rates for this project in New Brunswick

TradeHoursAvg. wage / hourInstalled rate / hour
Landscaper / hardscape41C$26.00C$52.00
  • Labor wages: Statistics Canada, Table 14-10-0063-01 — average hourly wage, construction industry, by province (monthly) — data period October 2026, last checked November 21, 2026.
  • Material prices & exchange rate: North American average material prices converted with European Central Bank reference rates (Frankfurter API) and a regional price factor — data period 2026-11-20, last checked November 21, 2026.

What a paver patio includes

A paver patio is mostly excavation and base work: geotextile, crushed gravel, bedding sand, then the pavers, edge restraint and polymeric joint sand. A good base is what keeps pavers level for decades.

Main cost factors

  • Patio area
  • Paver type
  • Base depth
  • Borders and edging
  • Steps or seat walls

How to save money

  • Do not skimp on base depth on clay soils.
  • Simple running-bond patterns waste less paver material.
  • Permeable pavers can reduce storm-water fees in some cities.
  • Seat walls and steps add the most cost per square foot.

Timeline

2–5 days.

Permits

Usually not required for ground-level patios; check lot coverage rules.

Frequently asked questions

How much does a paver patio cost in New Brunswick?

A typical paver patio in New Brunswick costs about C$9,477, with most projects between C$8,340 and C$10,899. That is about C$32 per sq ft.

How much of the cost is labor?

Labor is about 32% of the direct cost (41 work hours) for a typical project in New Brunswick. Materials are C$3,136 and equipment, disposal and permits C$1,272, before contingency, contractor overhead and tax.

Is a paver patio cheaper in New Brunswick than in nearby regions?

A typical paver patio costs C$9,477 in New Brunswick. Among nearby regions, Prince Edward Island is the lowest at C$9,353 and Quebec the highest at C$10,099. Differences come mostly from local wages, material prices and taxes.

Do I need a licensed contractor in New Brunswick?

Contractor licensing in New Brunswick is mostly handled by municipalities, and trades such as electricians and plumbers need provincial certification.

What local conditions affect paver patio costs in New Brunswick?

Freeze–thaw cycles and de-icing salts call for air-entrained concrete, control joints and a thicker compacted base.

How long does a paver patio take?

2–5 days.

Do I need a permit for a paver patio?

Usually not required for ground-level patios; check lot coverage rules.

How much base gravel do I need?

See the “Base” category for cubic yards for your base depth.

How long do paver patios last?

25–50 years with occasional re-sanding of joints.

Can I change the contractor markup or contingency?

Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.

Paver Patio cost in other provinces

Compare paver patio costs in every state, province and territory →

More cost calculators for New Brunswick

Choose your location

AB AlbertaBC British ColumbiaMB ManitobaNB New BrunswickNL Newfoundland and LabradorNS Nova ScotiaON OntarioPE Prince Edward IslandQC QuebecSK SaskatchewanYT YukonNT Northwest TerritoriesNU Nunavut