Paver Patio Cost Calculator — Newfoundland and Labrador
Average paver patio cost in Newfoundland and Labrador: C$10,055 (typical range C$8,848–C$11,563, C$34 per sq ft). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from Newfoundland and Labrador pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a paver patio cost in Newfoundland and Labrador?
Based on current Newfoundland and Labrador labor rates and material prices, a typical paver patio costs about C$10,055. Most projects fall between C$8,848 and C$11,563, or roughly C$34 per sq ft. This example assumes: patio area 300 sq ft, paver Concrete pavers, base 6".
Cost by project size
| Project size | Estimated cost |
|---|---|
| 150 sq ft | C$5,674 |
| 300 sq ft | C$10,055 |
| 600 sq ft | C$19,529 |
Where the money goes
- PaversC$3,854 (56%)
- ExcavationC$1,607 (23%)
- BaseC$1,451 (21%)
Materials C$3,257 · Labor C$2,334 (41 hours) · Equipment, disposal & permits C$1,321 — before contingency, contractor overhead & profit and tax.
Newfoundland and Labrador vs. Canada average
A typical paver patio in Newfoundland and Labrador costs 2% more than the Canada average (C$10,055 vs. C$9,875). The difference comes mainly from local wages — a carpenter earns on average C$36.01 per hour in Newfoundland and Labrador — and from regional material prices and GST / HST / PST of 15%.
Paver Patio in Newfoundland and Labrador: local factors
Newfoundland and Labrador ranks 6th of 13 provinces and territories for paver patio cost (1 = most expensive) — in the middle.
| Nearby region | Typical cost | vs. Newfoundland and Labrador |
|---|---|---|
| Newfoundland and Labrador | C$10,055 | — |
| Quebec | C$10,099 | 0% |
| Nova Scotia | C$9,692 | -4% |
What affects the price in Newfoundland and Labrador
- Snow loads: Freeze–thaw cycles and de-icing salts call for air-entrained concrete, control joints and a thicker compacted base.
Permits & contractor licensing in Newfoundland and Labrador
- Contractor license: Contractor licensing in Newfoundland and Labrador is mostly handled by municipalities, and trades such as electricians and plumbers need provincial certification.
- Building code: Work must meet the building code adopted in Newfoundland and Labrador (based on the National Building Code of Canada).
- Permits: Building permits are issued by your municipality.
Rules vary by city — always confirm with your local building department before work starts.
Labor rates for this project in Newfoundland and Labrador
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Landscaper / hardscape | 41 | C$28.81 | C$57.62 |
- Labor wages: Statistics Canada, Table 14-10-0063-01 — average hourly wage, construction industry, by province (monthly) — data period October 2026, last checked November 21, 2026.
- Material prices & exchange rate: North American average material prices converted with European Central Bank reference rates (Frankfurter API) and a regional price factor — data period 2026-11-20, last checked November 21, 2026.
What a paver patio includes
A paver patio is mostly excavation and base work: geotextile, crushed gravel, bedding sand, then the pavers, edge restraint and polymeric joint sand. A good base is what keeps pavers level for decades.
Main cost factors
- Patio area
- Paver type
- Base depth
- Borders and edging
- Steps or seat walls
How to save money
- Do not skimp on base depth on clay soils.
- Simple running-bond patterns waste less paver material.
- Permeable pavers can reduce storm-water fees in some cities.
- Seat walls and steps add the most cost per square foot.
Timeline
2–5 days.
Permits
Usually not required for ground-level patios; check lot coverage rules.
Frequently asked questions
How much does a paver patio cost in Newfoundland and Labrador?
A typical paver patio in Newfoundland and Labrador costs about C$10,055, with most projects between C$8,848 and C$11,563. That is about C$34 per sq ft.
How much of the cost is labor?
Labor is about 34% of the direct cost (41 work hours) for a typical project in Newfoundland and Labrador. Materials are C$3,257 and equipment, disposal and permits C$1,321, before contingency, contractor overhead and tax.
Is a paver patio cheaper in Newfoundland and Labrador than in nearby regions?
A typical paver patio costs C$10,055 in Newfoundland and Labrador. Among nearby regions, Nova Scotia is the lowest at C$9,692 and Quebec the highest at C$10,099. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in Newfoundland and Labrador?
Contractor licensing in Newfoundland and Labrador is mostly handled by municipalities, and trades such as electricians and plumbers need provincial certification.
What local conditions affect paver patio costs in Newfoundland and Labrador?
Freeze–thaw cycles and de-icing salts call for air-entrained concrete, control joints and a thicker compacted base.
How long does a paver patio take?
2–5 days.
Do I need a permit for a paver patio?
Usually not required for ground-level patios; check lot coverage rules.
How much base gravel do I need?
See the “Base” category for cubic yards for your base depth.
How long do paver patios last?
25–50 years with occasional re-sanding of joints.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Paver Patio cost in other provinces
Compare paver patio costs in every state, province and territory →