Block Wall Fence Cost Calculator — Saskatchewan
Average block wall fence cost in Saskatchewan: C$28,947 (typical range C$25,473–C$33,289, C$289 per linear foot). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from Saskatchewan pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a block wall fence cost in Saskatchewan?
Based on current Saskatchewan labor rates and material prices, a typical block wall fence costs about C$28,947. Most projects fall between C$25,473 and C$33,289, or roughly C$289 per linear foot. This example assumes: length 100 ft, height 6 ft, blocks 709, face area 600 sq ft.
Cost by project size
| Project size | Estimated cost |
|---|---|
| 50 ft | C$16,953 |
| 100 ft | C$28,947 |
| 200 ft | C$53,633 |
Where the money goes
- Block wallC$12,495 (61%)
- Excavation & footingC$5,442 (26%)
- GatesC$1,075 (5%)
- Permit & engineeringC$958 (5%)
- Cap & finishC$645 (3%)
Materials C$8,545 · Labor C$9,883 (152 hours) · Equipment, disposal & permits C$2,187 — before contingency, contractor overhead & profit and tax.
Saskatchewan vs. Canada average
A typical block wall fence in Saskatchewan costs 7% less than the Canada average (C$28,947 vs. C$31,119). The difference comes mainly from local wages — a carpenter earns on average C$35.10 per hour in Saskatchewan — and from regional material prices and GST / HST / PST of 11%.
Block Wall Fence in Saskatchewan: local factors
Saskatchewan ranks 11th of 13 provinces and territories for block wall fence cost (1 = most expensive) — among the most affordable.
| Nearby region | Typical cost | vs. Saskatchewan |
|---|---|---|
| Saskatchewan | C$28,947 | — |
| Alberta | C$29,279 | +1% |
| Manitoba | C$28,598 | -1% |
| Northwest Territories | C$38,296 | +32% |
What affects the price in Saskatchewan
- Deep frost: Posts and footings must go below the frost line — usually 42–60 in. (1.1–1.5 m) here — which means more digging and concrete per post.
Permits & contractor licensing in Saskatchewan
- Contractor license: Contractor licensing in Saskatchewan is mostly handled by municipalities, and trades such as electricians and plumbers need provincial certification.
- Building code: Work must meet the building code adopted in Saskatchewan (based on the National Building Code of Canada).
- Permits: Building permits are issued by your municipality.
Rules vary by city — always confirm with your local building department before work starts.
Labor rates for this project in Saskatchewan
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Brick / block mason | 75 | C$35.80 | C$71.60 |
| Construction laborer | 65 | C$28.08 | C$56.16 |
| Cement mason / concrete finisher | 8 | C$34.40 | C$68.80 |
| Ironworker / welder | 4 | C$38.61 | C$77.22 |
- Labor wages: Statistics Canada, Table 14-10-0063-01 — average hourly wage, construction industry, by province (monthly) — data period October 2026, last checked November 21, 2026.
- Material prices & exchange rate: North American average material prices converted with European Central Bank reference rates (Frankfurter API) and a regional price factor — data period 2026-11-20, last checked November 21, 2026.
What a block wall fence includes
A concrete block (CMU) wall needs a reinforced footing, vertical rebar grouted into the cells, horizontal reinforcement, mortar and a cap. Stucco or paint finish adds cost and life. Walls over 4 ft often need engineering.
Main cost factors
- Wall length and height
- Block type
- Footing and rebar
- Pilasters and cap
- Stucco or paint finish
How to save money
- Closer rebar spacing is required in high-wind and seismic areas.
- Split-face block looks finished without stucco.
- Pilasters every 10–16 ft stiffen tall walls.
- Plan drainage behind walls that hold back soil.
Timeline
1–3 weeks depending on length.
Permits
Walls over 4 ft (or retaining walls) usually need a permit and engineered design.
Frequently asked questions
How much does a block wall fence cost in Saskatchewan?
A typical block wall fence in Saskatchewan costs about C$28,947, with most projects between C$25,473 and C$33,289. That is about C$289 per linear foot.
How much of the cost is labor?
Labor is about 48% of the direct cost (152 work hours) for a typical project in Saskatchewan. Materials are C$8,545 and equipment, disposal and permits C$2,187, before contingency, contractor overhead and tax.
Is a block wall fence cheaper in Saskatchewan than in nearby regions?
A typical block wall fence costs C$28,947 in Saskatchewan. Among nearby regions, Manitoba is the lowest at C$28,598 and Northwest Territories the highest at C$38,296. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in Saskatchewan?
Contractor licensing in Saskatchewan is mostly handled by municipalities, and trades such as electricians and plumbers need provincial certification.
What local conditions affect block wall fence costs in Saskatchewan?
Posts and footings must go below the frost line — usually 42–60 in. (1.1–1.5 m) here — which means more digging and concrete per post.
How long does a block wall fence take?
1–3 weeks depending on length.
Do I need a permit for a block wall fence?
Walls over 4 ft (or retaining walls) usually need a permit and engineered design.
How many blocks do I need?
The breakdown shows the block count (wall face area ÷ 0.89 sq ft per block + 5%).
Block wall or wood fence?
Block walls cost more but last 50+ years and block noise.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Block Wall Fence cost in other provinces
Compare block wall fence costs in every state, province and territory →