Block Wall Fence Cost Calculator — Newfoundland and Labrador

Average block wall fence cost in Newfoundland and Labrador: C$31,122 (typical range C$27,387–C$35,790, C$311 per linear foot). Enter your own sizes below for an itemized estimate. Updated November 2026

Loading calculator…

Free · No obligation

Get up to 3 free quotes from Newfoundland and Labrador pros

  • Compare real prices with your estimate
  • Local, licensed and insured contractors
  • Takes 30 seconds — your estimate is attached

How much does a block wall fence cost in Newfoundland and Labrador?

Based on current Newfoundland and Labrador labor rates and material prices, a typical block wall fence costs about C$31,122. Most projects fall between C$27,387 and C$35,790, or roughly C$311 per linear foot. This example assumes: length 100 ft, height 6 ft, blocks 709, face area 600 sq ft.

Cost by project size

Project sizeEstimated cost
50 ftC$18,249
100 ftC$31,122
200 ftC$57,626

Where the money goes

  • Block wallC$12,942 (60%)
  • Excavation & footingC$5,656 (26%)
  • GatesC$1,120 (5%)
  • Permit & engineeringC$1,004 (5%)
  • Cap & finishC$670 (3%)

Materials C$8,960 · Labor C$10,140 (152 hours) · Equipment, disposal & permits C$2,293 — before contingency, contractor overhead & profit and tax.

Newfoundland and Labrador vs. Canada average

A typical block wall fence in Newfoundland and Labrador costs 0% less than the Canada average (C$31,122 vs. C$31,119). The difference comes mainly from local wages — a carpenter earns on average C$36.01 per hour in Newfoundland and Labrador — and from regional material prices and GST / HST / PST of 15%.

Block Wall Fence in Newfoundland and Labrador: local factors

Newfoundland and Labrador ranks 7th of 13 provinces and territories for block wall fence cost (1 = most expensive) — in the middle.

Nearby regionTypical costvs. Newfoundland and Labrador
Newfoundland and LabradorC$31,122—
QuebecC$32,012+3%
Nova ScotiaC$30,000-4%

What affects the price in Newfoundland and Labrador

  • Deep frost: Posts and footings must go below the frost line — usually 42–60 in. (1.1–1.5 m) here — which means more digging and concrete per post.

Permits & contractor licensing in Newfoundland and Labrador

  • Contractor license: Contractor licensing in Newfoundland and Labrador is mostly handled by municipalities, and trades such as electricians and plumbers need provincial certification.
  • Building code: Work must meet the building code adopted in Newfoundland and Labrador (based on the National Building Code of Canada).
  • Permits: Building permits are issued by your municipality.

Rules vary by city — always confirm with your local building department before work starts.

Labor rates for this project in Newfoundland and Labrador

TradeHoursAvg. wage / hourInstalled rate / hour
Brick / block mason75C$36.73C$73.46
Construction laborer65C$28.81C$57.62
Cement mason / concrete finisher8C$35.29C$70.58
Ironworker / welder4C$39.61C$79.22
  • Labor wages: Statistics Canada, Table 14-10-0063-01 — average hourly wage, construction industry, by province (monthly) — data period October 2026, last checked November 21, 2026.
  • Material prices & exchange rate: North American average material prices converted with European Central Bank reference rates (Frankfurter API) and a regional price factor — data period 2026-11-20, last checked November 21, 2026.

What a block wall fence includes

A concrete block (CMU) wall needs a reinforced footing, vertical rebar grouted into the cells, horizontal reinforcement, mortar and a cap. Stucco or paint finish adds cost and life. Walls over 4 ft often need engineering.

Main cost factors

  • Wall length and height
  • Block type
  • Footing and rebar
  • Pilasters and cap
  • Stucco or paint finish

How to save money

  • Closer rebar spacing is required in high-wind and seismic areas.
  • Split-face block looks finished without stucco.
  • Pilasters every 10–16 ft stiffen tall walls.
  • Plan drainage behind walls that hold back soil.

Timeline

1–3 weeks depending on length.

Permits

Walls over 4 ft (or retaining walls) usually need a permit and engineered design.

Frequently asked questions

How much does a block wall fence cost in Newfoundland and Labrador?

A typical block wall fence in Newfoundland and Labrador costs about C$31,122, with most projects between C$27,387 and C$35,790. That is about C$311 per linear foot.

How much of the cost is labor?

Labor is about 47% of the direct cost (152 work hours) for a typical project in Newfoundland and Labrador. Materials are C$8,960 and equipment, disposal and permits C$2,293, before contingency, contractor overhead and tax.

Is a block wall fence cheaper in Newfoundland and Labrador than in nearby regions?

A typical block wall fence costs C$31,122 in Newfoundland and Labrador. Among nearby regions, Nova Scotia is the lowest at C$30,000 and Quebec the highest at C$32,012. Differences come mostly from local wages, material prices and taxes.

Do I need a licensed contractor in Newfoundland and Labrador?

Contractor licensing in Newfoundland and Labrador is mostly handled by municipalities, and trades such as electricians and plumbers need provincial certification.

What local conditions affect block wall fence costs in Newfoundland and Labrador?

Posts and footings must go below the frost line — usually 42–60 in. (1.1–1.5 m) here — which means more digging and concrete per post.

How long does a block wall fence take?

1–3 weeks depending on length.

Do I need a permit for a block wall fence?

Walls over 4 ft (or retaining walls) usually need a permit and engineered design.

How many blocks do I need?

The breakdown shows the block count (wall face area ÷ 0.89 sq ft per block + 5%).

Block wall or wood fence?

Block walls cost more but last 50+ years and block noise.

Can I change the contractor markup or contingency?

Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.

Block Wall Fence cost in other provinces

Compare block wall fence costs in every state, province and territory →

More cost calculators for Newfoundland and Labrador

Choose your location

AB AlbertaBC British ColumbiaMB ManitobaNB New BrunswickNL Newfoundland and LabradorNS Nova ScotiaON OntarioPE Prince Edward IslandQC QuebecSK SaskatchewanYT YukonNT Northwest TerritoriesNU Nunavut