Iron & Metal Fence Cost Calculator — Saskatchewan

Average iron & metal fence cost in Saskatchewan: C$21,186 (typical range C$18,644–C$24,364, C$141 per linear foot). Enter your own sizes below for an itemized estimate. Updated November 2026

Loading calculator…

Free · No obligation

Get up to 3 free quotes from Saskatchewan pros

  • Compare real prices with your estimate
  • Local, licensed and insured contractors
  • Takes 30 seconds — your estimate is attached

How much does a iron & metal fence cost in Saskatchewan?

Based on current Saskatchewan labor rates and material prices, a typical iron & metal fence costs about C$21,186. Most projects fall between C$18,644 and C$24,364, or roughly C$141 per linear foot. This example assumes: type Wrought iron / ornamental steel, length 150 ft, height 5 ft, gates 1 walk / 0 drive.

Cost by project size

Project sizeEstimated cost
75 ftC$12,041
150 ftC$21,186
300 ftC$40,235

Where the money goes

  • Fence materialsC$13,787 (91%)
  • Gates & automationC$857 (6%)
  • Permit & layoutC$445 (3%)

Materials C$12,023 · Labor C$2,889 (48 hours) · Equipment, disposal & permits C$177 — before contingency, contractor overhead & profit and tax.

Saskatchewan vs. Canada average

A typical iron & metal fence in Saskatchewan costs 4% less than the Canada average (C$21,186 vs. C$22,059). The difference comes mainly from local wages — a carpenter earns on average C$35.10 per hour in Saskatchewan — and from regional material prices and GST / HST / PST of 11%.

Iron & Metal Fence in Saskatchewan: local factors

Saskatchewan ranks 12th of 13 provinces and territories for iron & metal fence cost (1 = most expensive) — among the most affordable.

Nearby regionTypical costvs. Saskatchewan
SaskatchewanC$21,186—
AlbertaC$20,594-3%
ManitobaC$21,1980%
Northwest TerritoriesC$27,555+30%

What affects the price in Saskatchewan

  • Deep frost: Posts and footings must go below the frost line — usually 42–60 in. (1.1–1.5 m) here — which means more digging and concrete per post.

Permits & contractor licensing in Saskatchewan

  • Contractor license: Contractor licensing in Saskatchewan is mostly handled by municipalities, and trades such as electricians and plumbers need provincial certification.
  • Building code: Work must meet the building code adopted in Saskatchewan (based on the National Building Code of Canada).
  • Permits: Building permits are issued by your municipality.

Rules vary by city — always confirm with your local building department before work starts.

Labor rates for this project in Saskatchewan

TradeHoursAvg. wage / hourInstalled rate / hour
Fence erector48C$29.84C$59.68
  • Labor wages: Statistics Canada, Table 14-10-0063-01 — average hourly wage, construction industry, by province (monthly) — data period October 2026, last checked November 21, 2026.
  • Material prices & exchange rate: North American average material prices converted with European Central Bank reference rates (Frankfurter API) and a regional price factor — data period 2026-11-20, last checked November 21, 2026.

What a iron & metal fence includes

Metal fences range from budget chain link to ornamental aluminum and wrought iron. Driveway gates and automatic openers can cost as much as the fence itself.

Main cost factors

  • Fence type
  • Length and height
  • Walk and driveway gates
  • Automatic gate opener
  • Finish (galvanized, powder coat)

How to save money

  • Chain link is the cheapest way to enclose a large yard.
  • Aluminum looks like iron but never rusts and costs less.
  • Powder-coated steel lasts much longer than painted steel.
  • Sliding gates suit sloped driveways; swing gates are cheaper on flat ground.

Timeline

2–5 days, plus 2–4 weeks for custom gates.

Permits

Permits are often required for fences over 6 ft and for electrical work on gate openers.

Frequently asked questions

How much does a iron & metal fence cost in Saskatchewan?

A typical iron & metal fence in Saskatchewan costs about C$21,186, with most projects between C$18,644 and C$24,364. That is about C$141 per linear foot.

How much of the cost is labor?

Labor is about 19% of the direct cost (48 work hours) for a typical project in Saskatchewan. Materials are C$12,023 and equipment, disposal and permits C$177, before contingency, contractor overhead and tax.

Is a iron & metal fence cheaper in Saskatchewan than in nearby regions?

A typical iron & metal fence costs C$21,186 in Saskatchewan. Among nearby regions, Alberta is the lowest at C$20,594 and Northwest Territories the highest at C$27,555. Differences come mostly from local wages, material prices and taxes.

Do I need a licensed contractor in Saskatchewan?

Contractor licensing in Saskatchewan is mostly handled by municipalities, and trades such as electricians and plumbers need provincial certification.

What local conditions affect iron & metal fence costs in Saskatchewan?

Posts and footings must go below the frost line — usually 42–60 in. (1.1–1.5 m) here — which means more digging and concrete per post.

How long does a iron & metal fence take?

2–5 days, plus 2–4 weeks for custom gates.

Do I need a permit for a iron & metal fence?

Permits are often required for fences over 6 ft and for electrical work on gate openers.

Is wrought iron more expensive than aluminum?

Yes — compare both by switching the fence type above.

How much does an automatic gate opener cost?

Turn on “Automatic gate opener” to see opener, safety and wiring costs.

Can I change the contractor markup or contingency?

Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.

Iron & Metal Fence cost in other provinces

Compare iron & metal fence costs in every state, province and territory →

More cost calculators for Saskatchewan

Choose your location

AB AlbertaBC British ColumbiaMB ManitobaNB New BrunswickNL Newfoundland and LabradorNS Nova ScotiaON OntarioPE Prince Edward IslandQC QuebecSK SaskatchewanYT YukonNT Northwest TerritoriesNU Nunavut