Iron & Metal Fence Cost Calculator — New Brunswick

Average iron & metal fence cost in New Brunswick: C$21,811 (typical range C$19,194–C$25,083, C$145 per linear foot). Enter your own sizes below for an itemized estimate. Updated November 2026

Loading calculator…

Free · No obligation

Get up to 3 free quotes from New Brunswick pros

  • Compare real prices with your estimate
  • Local, licensed and insured contractors
  • Takes 30 seconds — your estimate is attached

How much does a iron & metal fence cost in New Brunswick?

Based on current New Brunswick labor rates and material prices, a typical iron & metal fence costs about C$21,811. Most projects fall between C$19,194 and C$25,083, or roughly C$145 per linear foot. This example assumes: type Wrought iron / ornamental steel, length 150 ft, height 5 ft, gates 1 walk / 0 drive.

Cost by project size

Project sizeEstimated cost
75 ftC$12,389
150 ftC$21,811
300 ftC$41,435

Where the money goes

  • Fence materialsC$13,713 (91%)
  • Gates & automationC$852 (6%)
  • Permit & layoutC$427 (3%)

Materials C$12,140 · Labor C$2,675 (48 hours) · Equipment, disposal & permits C$179 — before contingency, contractor overhead & profit and tax.

New Brunswick vs. Canada average

A typical iron & metal fence in New Brunswick costs 1% less than the Canada average (C$21,811 vs. C$22,059). The difference comes mainly from local wages — a carpenter earns on average C$32.50 per hour in New Brunswick — and from regional material prices and GST / HST / PST of 15%.

Iron & Metal Fence in New Brunswick: local factors

New Brunswick ranks 10th of 13 provinces and territories for iron & metal fence cost (1 = most expensive) — among the most affordable.

Nearby regionTypical costvs. New Brunswick
New BrunswickC$21,811—
Nova ScotiaC$22,092+1%
QuebecC$22,409+3%
Prince Edward IslandC$21,8410%

What affects the price in New Brunswick

  • Deep frost: Posts and footings must go below the frost line — usually 42–60 in. (1.1–1.5 m) here — which means more digging and concrete per post.

Permits & contractor licensing in New Brunswick

  • Contractor license: Contractor licensing in New Brunswick is mostly handled by municipalities, and trades such as electricians and plumbers need provincial certification.
  • Building code: Work must meet the building code adopted in New Brunswick (based on the National Building Code of Canada).
  • Permits: Building permits are issued by your municipality.

Rules vary by city — always confirm with your local building department before work starts.

Labor rates for this project in New Brunswick

TradeHoursAvg. wage / hourInstalled rate / hour
Fence erector48C$27.63C$55.26
  • Labor wages: Statistics Canada, Table 14-10-0063-01 — average hourly wage, construction industry, by province (monthly) — data period October 2026, last checked November 21, 2026.
  • Material prices & exchange rate: North American average material prices converted with European Central Bank reference rates (Frankfurter API) and a regional price factor — data period 2026-11-20, last checked November 21, 2026.

What a iron & metal fence includes

Metal fences range from budget chain link to ornamental aluminum and wrought iron. Driveway gates and automatic openers can cost as much as the fence itself.

Main cost factors

  • Fence type
  • Length and height
  • Walk and driveway gates
  • Automatic gate opener
  • Finish (galvanized, powder coat)

How to save money

  • Chain link is the cheapest way to enclose a large yard.
  • Aluminum looks like iron but never rusts and costs less.
  • Powder-coated steel lasts much longer than painted steel.
  • Sliding gates suit sloped driveways; swing gates are cheaper on flat ground.

Timeline

2–5 days, plus 2–4 weeks for custom gates.

Permits

Permits are often required for fences over 6 ft and for electrical work on gate openers.

Frequently asked questions

How much does a iron & metal fence cost in New Brunswick?

A typical iron & metal fence in New Brunswick costs about C$21,811, with most projects between C$19,194 and C$25,083. That is about C$145 per linear foot.

How much of the cost is labor?

Labor is about 18% of the direct cost (48 work hours) for a typical project in New Brunswick. Materials are C$12,140 and equipment, disposal and permits C$179, before contingency, contractor overhead and tax.

Is a iron & metal fence cheaper in New Brunswick than in nearby regions?

A typical iron & metal fence costs C$21,811 in New Brunswick. Among nearby regions, Prince Edward Island is the lowest at C$21,841 and Quebec the highest at C$22,409. Differences come mostly from local wages, material prices and taxes.

Do I need a licensed contractor in New Brunswick?

Contractor licensing in New Brunswick is mostly handled by municipalities, and trades such as electricians and plumbers need provincial certification.

What local conditions affect iron & metal fence costs in New Brunswick?

Posts and footings must go below the frost line — usually 42–60 in. (1.1–1.5 m) here — which means more digging and concrete per post.

How long does a iron & metal fence take?

2–5 days, plus 2–4 weeks for custom gates.

Do I need a permit for a iron & metal fence?

Permits are often required for fences over 6 ft and for electrical work on gate openers.

Is wrought iron more expensive than aluminum?

Yes — compare both by switching the fence type above.

How much does an automatic gate opener cost?

Turn on “Automatic gate opener” to see opener, safety and wiring costs.

Can I change the contractor markup or contingency?

Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.

Iron & Metal Fence cost in other provinces

Compare iron & metal fence costs in every state, province and territory →

More cost calculators for New Brunswick

Choose your location

AB AlbertaBC British ColumbiaMB ManitobaNB New BrunswickNL Newfoundland and LabradorNS Nova ScotiaON OntarioPE Prince Edward IslandQC QuebecSK SaskatchewanYT YukonNT Northwest TerritoriesNU Nunavut