Iron & Metal Fence Cost Calculator — Newfoundland and Labrador
Average iron & metal fence cost in Newfoundland and Labrador: C$22,921 (typical range C$20,170–C$26,359, C$153 per linear foot). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from Newfoundland and Labrador pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a iron & metal fence cost in Newfoundland and Labrador?
Based on current Newfoundland and Labrador labor rates and material prices, a typical iron & metal fence costs about C$22,921. Most projects fall between C$20,170 and C$26,359, or roughly C$153 per linear foot. This example assumes: type Wrought iron / ornamental steel, length 150 ft, height 5 ft, gates 1 walk / 0 drive.
Cost by project size
| Project size | Estimated cost |
|---|---|
| 75 ft | C$13,025 |
| 150 ft | C$22,921 |
| 300 ft | C$43,532 |
Where the money goes
- Fence materialsC$14,400 (91%)
- Gates & automationC$895 (6%)
- Permit & layoutC$461 (3%)
Materials C$12,607 · Labor C$2,963 (48 hours) · Equipment, disposal & permits C$185 — before contingency, contractor overhead & profit and tax.
Newfoundland and Labrador vs. Canada average
A typical iron & metal fence in Newfoundland and Labrador costs 4% more than the Canada average (C$22,921 vs. C$22,059). The difference comes mainly from local wages — a carpenter earns on average C$36.01 per hour in Newfoundland and Labrador — and from regional material prices and GST / HST / PST of 15%.
Iron & Metal Fence in Newfoundland and Labrador: local factors
Newfoundland and Labrador ranks 5th of 13 provinces and territories for iron & metal fence cost (1 = most expensive) — among the most expensive.
| Nearby region | Typical cost | vs. Newfoundland and Labrador |
|---|---|---|
| Newfoundland and Labrador | C$22,921 | — |
| Quebec | C$22,409 | -2% |
| Nova Scotia | C$22,092 | -4% |
What affects the price in Newfoundland and Labrador
- Deep frost: Posts and footings must go below the frost line — usually 42–60 in. (1.1–1.5 m) here — which means more digging and concrete per post.
Permits & contractor licensing in Newfoundland and Labrador
- Contractor license: Contractor licensing in Newfoundland and Labrador is mostly handled by municipalities, and trades such as electricians and plumbers need provincial certification.
- Building code: Work must meet the building code adopted in Newfoundland and Labrador (based on the National Building Code of Canada).
- Permits: Building permits are issued by your municipality.
Rules vary by city — always confirm with your local building department before work starts.
Labor rates for this project in Newfoundland and Labrador
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Fence erector | 48 | C$30.61 | C$61.22 |
- Labor wages: Statistics Canada, Table 14-10-0063-01 — average hourly wage, construction industry, by province (monthly) — data period October 2026, last checked November 21, 2026.
- Material prices & exchange rate: North American average material prices converted with European Central Bank reference rates (Frankfurter API) and a regional price factor — data period 2026-11-20, last checked November 21, 2026.
What a iron & metal fence includes
Metal fences range from budget chain link to ornamental aluminum and wrought iron. Driveway gates and automatic openers can cost as much as the fence itself.
Main cost factors
- Fence type
- Length and height
- Walk and driveway gates
- Automatic gate opener
- Finish (galvanized, powder coat)
How to save money
- Chain link is the cheapest way to enclose a large yard.
- Aluminum looks like iron but never rusts and costs less.
- Powder-coated steel lasts much longer than painted steel.
- Sliding gates suit sloped driveways; swing gates are cheaper on flat ground.
Timeline
2–5 days, plus 2–4 weeks for custom gates.
Permits
Permits are often required for fences over 6 ft and for electrical work on gate openers.
Frequently asked questions
How much does a iron & metal fence cost in Newfoundland and Labrador?
A typical iron & metal fence in Newfoundland and Labrador costs about C$22,921, with most projects between C$20,170 and C$26,359. That is about C$153 per linear foot.
How much of the cost is labor?
Labor is about 19% of the direct cost (48 work hours) for a typical project in Newfoundland and Labrador. Materials are C$12,607 and equipment, disposal and permits C$185, before contingency, contractor overhead and tax.
Is a iron & metal fence cheaper in Newfoundland and Labrador than in nearby regions?
A typical iron & metal fence costs C$22,921 in Newfoundland and Labrador. Among nearby regions, Nova Scotia is the lowest at C$22,092 and Quebec the highest at C$22,409. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in Newfoundland and Labrador?
Contractor licensing in Newfoundland and Labrador is mostly handled by municipalities, and trades such as electricians and plumbers need provincial certification.
What local conditions affect iron & metal fence costs in Newfoundland and Labrador?
Posts and footings must go below the frost line — usually 42–60 in. (1.1–1.5 m) here — which means more digging and concrete per post.
How long does a iron & metal fence take?
2–5 days, plus 2–4 weeks for custom gates.
Do I need a permit for a iron & metal fence?
Permits are often required for fences over 6 ft and for electrical work on gate openers.
Is wrought iron more expensive than aluminum?
Yes — compare both by switching the fence type above.
How much does an automatic gate opener cost?
Turn on “Automatic gate opener” to see opener, safety and wiring costs.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Iron & Metal Fence cost in other provinces
Compare iron & metal fence costs in every state, province and territory →