Block Wall Fence Cost Calculator — Western Australia

Average block wall fence cost in Western Australia: A$36,849 (typical range A$32,427–A$42,376, A$1,209 per metre). Enter your own sizes below for an itemized estimate. Updated November 2026

Loading calculator…

Free · No obligation

Get up to 3 free quotes from Western Australia pros

  • Compare real prices with your estimate
  • Local, licensed and insured contractors
  • Takes 30 seconds — your estimate is attached

How much does a block wall fence cost in Western Australia?

Based on current Western Australia labor rates and material prices, a typical block wall fence costs about A$36,849. Most projects fall between A$32,427 and A$42,376, or roughly A$1,209 per metre. This example assumes: length 30.5 m, height 1.8 m, blocks 709, face area 56 m².

Cost by project size

Project sizeEstimated cost
15 mA$21,018
31 mA$36,849
61 mA$69,212

Where the money goes

  • Block wallA$16,686 (63%)
  • Excavation & footingA$6,771 (26%)
  • GatesA$1,259 (5%)
  • Permit & engineeringA$960 (4%)
  • Cap & finishA$806 (3%)

Materials A$8,563 · Labor A$15,727 (152 hours) · Equipment, disposal & permits A$2,192 — before contingency, contractor overhead & profit and tax.

Western Australia vs. Australia average

A typical block wall fence in Western Australia costs 6% more than the Australia average (A$36,849 vs. A$34,878). The difference comes mainly from local wages — a carpenter earns on average A$55.85 per hour in Western Australia — and from regional material prices and GST of 10%.

Block Wall Fence in Western Australia: local factors

Western Australia ranks 2nd of 8 states and territories for block wall fence cost (1 = most expensive) — among the most expensive.

Nearby regionTypical costvs. Western Australia
Western AustraliaA$36,849—
Northern TerritoryA$35,996-2%
South AustraliaA$33,343-10%

Permits & contractor licensing in Western Australia

  • Contractor license: Builders and trades must be licensed or registered in Western Australia, and most states require home warranty insurance above a contract value.
  • Building code: Work must comply with the National Construction Code (NCC) and Australian Standards.
  • Permits: Building approval comes from your council or a private building certifier.

Rules vary by city — always confirm with your local building department before work starts.

Labor rates for this project in Western Australia

TradeHoursAvg. wage / hourInstalled rate / hour
Brick / block mason75A$56.97A$113.94
Construction laborer65A$44.68A$89.36
Cement mason / concrete finisher8A$54.73A$109.46
Ironworker / welder4A$61.43A$122.86
  • Labor wages: Australian Bureau of Statistics (ABS), Average Weekly Earnings — construction industry, adjusted by state — data period May 2026, last checked November 21, 2026.
  • Material prices & exchange rate: North American average material prices converted with European Central Bank reference rates (Frankfurter API) and a regional price factor — data period 2026-11-20, last checked November 21, 2026.

What a block wall fence includes

A concrete block (CMU) wall needs a reinforced footing, vertical rebar grouted into the cells, horizontal reinforcement, mortar and a cap. Stucco or paint finish adds cost and life. Walls over 4 ft often need engineering.

Main cost factors

  • Wall length and height
  • Block type
  • Footing and rebar
  • Pilasters and cap
  • Stucco or paint finish

How to save money

  • Closer rebar spacing is required in high-wind and seismic areas.
  • Split-face block looks finished without stucco.
  • Pilasters every 10–16 ft stiffen tall walls.
  • Plan drainage behind walls that hold back soil.

Timeline

1–3 weeks depending on length.

Permits

Walls over 4 ft (or retaining walls) usually need a permit and engineered design.

Frequently asked questions

How much does a block wall fence cost in Western Australia?

A typical block wall fence in Western Australia costs about A$36,849, with most projects between A$32,427 and A$42,376. That is about A$1,209 per metre.

How much of the cost is labor?

Labor is about 59% of the direct cost (152 work hours) for a typical project in Western Australia. Materials are A$8,563 and equipment, disposal and permits A$2,192, before contingency, contractor overhead and tax.

Is a block wall fence cheaper in Western Australia than in nearby regions?

A typical block wall fence costs A$36,849 in Western Australia. Among nearby regions, South Australia is the lowest at A$33,343 and Northern Territory the highest at A$35,996. Differences come mostly from local wages, material prices and taxes.

Do I need a licensed contractor in Western Australia?

Builders and trades must be licensed or registered in Western Australia, and most states require home warranty insurance above a contract value.

How long does a block wall fence take?

1–3 weeks depending on length.

Do I need a permit for a block wall fence?

Walls over 4 ft (or retaining walls) usually need a permit and engineered design.

How many blocks do I need?

The breakdown shows the block count (wall face area ÷ 0.89 sq ft per block + 5%).

Block wall or wood fence?

Block walls cost more but last 50+ years and block noise.

Can I change the contractor markup or contingency?

Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.

Block Wall Fence cost in other states

Compare block wall fence costs in every state, province and territory →

More cost calculators for Western Australia

Choose your location

NSW New South WalesVIC VictoriaQLD QueenslandSA South AustraliaWA Western AustraliaTAS TasmaniaNT Northern TerritoryACT Australian Capital Territory