Roof Replacement Cost Calculator — Western Australia

Average roof replacement cost in Western Australia: A$27,686 (typical range A$24,364–A$31,839, A$131 per m² of roof area). Enter your own sizes below for an itemized estimate. Updated November 2026

Loading calculator…

Free · No obligation

Get up to 3 free quotes from Western Australia pros

  • Compare real prices with your estimate
  • Local, licensed and insured contractors
  • Takes 30 seconds — your estimate is attached

How much does a roof replacement cost in Western Australia?

Based on current Western Australia labor rates and material prices, a typical roof replacement costs about A$27,686. Most projects fall between A$24,364 and A$31,839, or roughly A$131 per m² of roof area. This example assumes: footprint 167 m², roof area 212 m², roofing squares 22.8 sq, material Architectural shingles.

Cost by project size

Project sizeEstimated cost
93 m²A$17,238
139 m²A$23,626
186 m²A$31,729
279 m²A$44,498

Where the money goes

  • RoofingA$18,232 (92%)
  • Permits & setupA$1,024 (5%)
  • Roof deckingA$640 (3%)

Materials A$7,649 · Labor A$8,587 (86 hours) · Equipment, disposal & permits A$3,660 — before contingency, contractor overhead & profit and tax.

Western Australia vs. Australia average

A typical roof replacement in Western Australia costs 5% more than the Australia average (A$27,686 vs. A$26,327). The difference comes mainly from local wages — a carpenter earns on average A$55.85 per hour in Western Australia — and from regional material prices and GST of 10%.

Roof Replacement in Western Australia: local factors

Western Australia ranks 2nd of 8 states and territories for roof replacement cost (1 = most expensive) — among the most expensive.

Nearby regionTypical costvs. Western Australia
Western AustraliaA$27,686—
Northern TerritoryA$27,999+1%
South AustraliaA$25,276-9%

What affects the price in Western Australia

  • Cyclone region: In cyclone regions roofs need cyclone-rated tie-downs and battens, and windows must meet the site wind classification (e.g. C1–C4).
  • Bushfire-prone areas: Your block’s BAL rating (AS 3959) sets the required materials: BAL-29 and above need ember screens, toughened glass and non-combustible cladding/decking.
  • Hot summers: Reflective “cool roof” shingles or light-colored metal reduce attic heat and cooling bills.

Permits & contractor licensing in Western Australia

  • Contractor license: Builders and trades must be licensed or registered in Western Australia, and most states require home warranty insurance above a contract value.
  • Building code: Work must comply with the National Construction Code (NCC) and Australian Standards.
  • Permits: Building approval comes from your council or a private building certifier.

Rules vary by city — always confirm with your local building department before work starts.

Labor rates for this project in Western Australia

TradeHoursAvg. wage / hourInstalled rate / hour
Roofer61A$51.94A$103.88
Construction laborer25A$44.68A$89.36
  • Labor wages: Australian Bureau of Statistics (ABS), Average Weekly Earnings — construction industry, adjusted by state — data period May 2026, last checked November 21, 2026.
  • Material prices & exchange rate: North American average material prices converted with European Central Bank reference rates (Frankfurter API) and a regional price factor — data period 2026-11-20, last checked November 21, 2026.

What a roof replacement includes

Roofers price by the “square” (100 sq ft of roof). The total depends on roof area, pitch, the material, how many old layers must be torn off and how much decking is rotten. Steep and multi-story roofs need more safety equipment and labor.

Main cost factors

  • Roof area and pitch
  • Roofing material
  • Layers to tear off
  • Decking replacement
  • Chimneys, skylights and gutters

How to save money

  • Get the decking checked — replacing a few sheets now prevents leaks later.
  • Architectural shingles cost only slightly more than 3-tab but last longer.
  • Replace gutters and flashing at the same time to save on labor.
  • Book in the off-season for better availability.

Timeline

1–3 days for an asphalt roof on a typical house.

Permits

Most cities require a re-roofing permit; some limit the number of shingle layers to two.

Frequently asked questions

How much does a roof replacement cost in Western Australia?

A typical roof replacement in Western Australia costs about A$27,686, with most projects between A$24,364 and A$31,839. That is about A$131 per m² of roof area.

How much of the cost is labor?

Labor is about 43% of the direct cost (86 work hours) for a typical project in Western Australia. Materials are A$7,649 and equipment, disposal and permits A$3,660, before contingency, contractor overhead and tax.

Is a roof replacement cheaper in Western Australia than in nearby regions?

A typical roof replacement costs A$27,686 in Western Australia. Among nearby regions, South Australia is the lowest at A$25,276 and Northern Territory the highest at A$27,999. Differences come mostly from local wages, material prices and taxes.

Do I need a licensed contractor in Western Australia?

Builders and trades must be licensed or registered in Western Australia, and most states require home warranty insurance above a contract value.

What local conditions affect roof replacement costs in Western Australia?

In cyclone regions roofs need cyclone-rated tie-downs and battens, and windows must meet the site wind classification (e.g. C1–C4). Your block’s BAL rating (AS 3959) sets the required materials: BAL-29 and above need ember screens, toughened glass and non-combustible cladding/decking.

How long does a roof replacement take?

1–3 days for an asphalt roof on a typical house.

Do I need a permit for a roof replacement?

Most cities require a re-roofing permit; some limit the number of shingle layers to two.

How do I measure my roof?

Enter your house footprint and pitch — the calculator converts it to roof area and squares.

Metal vs. shingles — which is cheaper long-term?

Metal costs more up front but lasts 40–70 years versus 20–30 for asphalt.

Can I change the contractor markup or contingency?

Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.

Roof Replacement cost in other states

Compare roof replacement costs in every state, province and territory →

More cost calculators for Western Australia

Choose your location

NSW New South WalesVIC VictoriaQLD QueenslandSA South AustraliaWA Western AustraliaTAS TasmaniaNT Northern TerritoryACT Australian Capital Territory