Block Wall Fence Cost Calculator — Tasmania
Average block wall fence cost in Tasmania: A$32,966 (typical range A$29,010–A$37,911, A$1,082 per metre). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from Tasmania pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a block wall fence cost in Tasmania?
Based on current Tasmania labor rates and material prices, a typical block wall fence costs about A$32,966. Most projects fall between A$29,010 and A$37,911, or roughly A$1,082 per metre. This example assumes: length 30.5 m, height 1.8 m, blocks 709, face area 56 m².
Cost by project size
| Project size | Estimated cost |
|---|---|
| 15 m | A$18,995 |
| 31 m | A$32,966 |
| 61 m | A$61,598 |
Where the money goes
- Block wallA$14,710 (62%)
- Excavation & footingA$6,133 (26%)
- GatesA$1,168 (5%)
- Permit & engineeringA$951 (4%)
- Cap & finishA$729 (3%)
Materials A$8,483 · Labor A$13,036 (152 hours) · Equipment, disposal & permits A$2,171 — before contingency, contractor overhead & profit and tax.
Tasmania vs. Australia average
A typical block wall fence in Tasmania costs 5% less than the Australia average (A$32,966 vs. A$34,878). The difference comes mainly from local wages — a carpenter earns on average A$46.29 per hour in Tasmania — and from regional material prices and GST of 10%.
Block Wall Fence in Tasmania: local factors
Tasmania ranks 8th of 8 states and territories for block wall fence cost (1 = most expensive) — among the most affordable.
| Nearby region | Typical cost | vs. Tasmania |
|---|---|---|
| Tasmania | A$32,966 | — |
| Victoria | A$34,319 | +4% |
Permits & contractor licensing in Tasmania
- Contractor license: Builders and trades must be licensed or registered in Tasmania, and most states require home warranty insurance above a contract value.
- Building code: Work must comply with the National Construction Code (NCC) and Australian Standards.
- Permits: Building approval comes from your council or a private building certifier.
Rules vary by city — always confirm with your local building department before work starts.
Labor rates for this project in Tasmania
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Brick / block mason | 75 | A$47.22 | A$94.44 |
| Construction laborer | 65 | A$37.04 | A$74.08 |
| Cement mason / concrete finisher | 8 | A$45.37 | A$90.74 |
| Ironworker / welder | 4 | A$50.92 | A$101.84 |
- Labor wages: Australian Bureau of Statistics (ABS), Average Weekly Earnings — construction industry, adjusted by state — data period May 2026, last checked November 21, 2026.
- Material prices & exchange rate: North American average material prices converted with European Central Bank reference rates (Frankfurter API) and a regional price factor — data period 2026-11-20, last checked November 21, 2026.
What a block wall fence includes
A concrete block (CMU) wall needs a reinforced footing, vertical rebar grouted into the cells, horizontal reinforcement, mortar and a cap. Stucco or paint finish adds cost and life. Walls over 4 ft often need engineering.
Main cost factors
- Wall length and height
- Block type
- Footing and rebar
- Pilasters and cap
- Stucco or paint finish
How to save money
- Closer rebar spacing is required in high-wind and seismic areas.
- Split-face block looks finished without stucco.
- Pilasters every 10–16 ft stiffen tall walls.
- Plan drainage behind walls that hold back soil.
Timeline
1–3 weeks depending on length.
Permits
Walls over 4 ft (or retaining walls) usually need a permit and engineered design.
Frequently asked questions
How much does a block wall fence cost in Tasmania?
A typical block wall fence in Tasmania costs about A$32,966, with most projects between A$29,010 and A$37,911. That is about A$1,082 per metre.
How much of the cost is labor?
Labor is about 55% of the direct cost (152 work hours) for a typical project in Tasmania. Materials are A$8,483 and equipment, disposal and permits A$2,171, before contingency, contractor overhead and tax.
Is a block wall fence cheaper in Tasmania than in nearby regions?
A typical block wall fence costs A$32,966 in Tasmania. Among nearby regions, Victoria is the lowest at A$34,319. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in Tasmania?
Builders and trades must be licensed or registered in Tasmania, and most states require home warranty insurance above a contract value.
How long does a block wall fence take?
1–3 weeks depending on length.
Do I need a permit for a block wall fence?
Walls over 4 ft (or retaining walls) usually need a permit and engineered design.
How many blocks do I need?
The breakdown shows the block count (wall face area ÷ 0.89 sq ft per block + 5%).
Block wall or wood fence?
Block walls cost more but last 50+ years and block noise.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Block Wall Fence cost in other states
Compare block wall fence costs in every state, province and territory →