Concrete Driveway & Slab Cost Calculator — Western Australia

Average concrete driveway & slab cost in Western Australia: A$18,418 (typical range A$16,208–A$21,181, A$248 per m²). Enter your own sizes below for an itemized estimate. Updated November 2026

Loading calculator…

Free · No obligation

Get up to 3 free quotes from Western Australia pros

  • Compare real prices with your estimate
  • Local, licensed and insured contractors
  • Takes 30 seconds — your estimate is attached

How much does a concrete driveway & slab cost in Western Australia?

Based on current Western Australia labor rates and material prices, a typical concrete driveway & slab costs about A$18,418. Most projects fall between A$16,208 and A$21,181, or roughly A$248 per m². This example assumes: size 12.2 m × 6.1 m, area 74 m², concrete 8.0 m³, thickness 4".

Cost by project size

Project sizeEstimated cost
6.1 × 3 mA$5,589
7.3 × 7.3 mA$13,965
12 × 6.1 mA$18,418
15 × 7.3 mA$27,208

Where the money goes

  • ConcreteA$8,867 (67%)
  • Base & formsA$4,147 (31%)
  • PermitA$222 (2%)

Materials A$5,379 · Labor A$6,786 (66 hours) · Equipment, disposal & permits A$1,071 — before contingency, contractor overhead & profit and tax.

Western Australia vs. Australia average

A typical concrete driveway & slab in Western Australia costs 5% more than the Australia average (A$18,418 vs. A$17,473). The difference comes mainly from local wages — a carpenter earns on average A$55.85 per hour in Western Australia — and from regional material prices and GST of 10%.

Concrete Driveway & Slab in Western Australia: local factors

Western Australia ranks 2nd of 8 states and territories for concrete driveway & slab cost (1 = most expensive) — among the most expensive.

Nearby regionTypical costvs. Western Australia
Western AustraliaA$18,418—
Northern TerritoryA$18,309-1%
South AustraliaA$16,740-9%

Permits & contractor licensing in Western Australia

  • Contractor license: Builders and trades must be licensed or registered in Western Australia, and most states require home warranty insurance above a contract value.
  • Building code: Work must comply with the National Construction Code (NCC) and Australian Standards.
  • Permits: Building approval comes from your council or a private building certifier.

Rules vary by city — always confirm with your local building department before work starts.

Labor rates for this project in Western Australia

TradeHoursAvg. wage / hourInstalled rate / hour
Cement mason / concrete finisher42A$54.73A$109.46
Construction laborer24A$44.68A$89.36
  • Labor wages: Australian Bureau of Statistics (ABS), Average Weekly Earnings — construction industry, adjusted by state — data period May 2026, last checked November 21, 2026.
  • Material prices & exchange rate: North American average material prices converted with European Central Bank reference rates (Frankfurter API) and a regional price factor — data period 2026-11-20, last checked November 21, 2026.

What a concrete driveway & slab includes

Concrete flatwork costs depend on area, thickness, reinforcement and finish. A compacted gravel base, forms, ready-mix delivery and finishing labor are included; stamped and colored finishes add materials and time.

Main cost factors

  • Area and thickness
  • Reinforcement
  • Decorative finish
  • Removing old concrete
  • Access for the truck

How to save money

  • 5–6 inches thickness for driveways with heavy vehicles.
  • Small pours under ~8 cubic yards pay a short-load fee — combine projects.
  • Seal the concrete after curing to prevent salt and stain damage.
  • Control joints every 8–12 ft prevent random cracks.

Timeline

2–4 days, plus 7 days before driving on it.

Permits

Driveway and curb-cut permits are common; check before pouring.

Frequently asked questions

How much does a concrete driveway & slab cost in Western Australia?

A typical concrete driveway & slab in Western Australia costs about A$18,418, with most projects between A$16,208 and A$21,181. That is about A$248 per m².

How much of the cost is labor?

Labor is about 51% of the direct cost (66 work hours) for a typical project in Western Australia. Materials are A$5,379 and equipment, disposal and permits A$1,071, before contingency, contractor overhead and tax.

Is a concrete driveway & slab cheaper in Western Australia than in nearby regions?

A typical concrete driveway & slab costs A$18,418 in Western Australia. Among nearby regions, South Australia is the lowest at A$16,740 and Northern Territory the highest at A$18,309. Differences come mostly from local wages, material prices and taxes.

Do I need a licensed contractor in Western Australia?

Builders and trades must be licensed or registered in Western Australia, and most states require home warranty insurance above a contract value.

How long does a concrete driveway & slab take?

2–4 days, plus 7 days before driving on it.

Do I need a permit for a concrete driveway & slab?

Driveway and curb-cut permits are common; check before pouring.

How many cubic yards do I need?

The breakdown shows the volume for your size and thickness with 6% extra.

Concrete or pavers?

Concrete is cheaper per square foot; pavers are easier to repair.

Can I change the contractor markup or contingency?

Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.

Concrete Driveway & Slab cost in other states

Compare concrete driveway & slab costs in every state, province and territory →

More cost calculators for Western Australia

Choose your location

NSW New South WalesVIC VictoriaQLD QueenslandSA South AustraliaWA Western AustraliaTAS TasmaniaNT Northern TerritoryACT Australian Capital Territory