Drywall Installation Cost Calculator — Western Australia

Average drywall installation cost in Western Australia: A$10,394 (typical range A$9,147–A$11,953, A$70 per m² of board area). Enter your own sizes below for an itemized estimate. Updated November 2026

Loading calculator…

Free · No obligation

Get up to 3 free quotes from Western Australia pros

  • Compare real prices with your estimate
  • Local, licensed and insured contractors
  • Takes 30 seconds — your estimate is attached

How much does a drywall installation cost in Western Australia?

Based on current Western Australia labor rates and material prices, a typical drywall installation costs about A$10,394. Most projects fall between A$9,147 and A$11,953, or roughly A$70 per m² of board area. This example assumes: wall area 111 m², ceiling area 37 m², sheets 56, finish Level 4.

Cost by project size

Project sizeEstimated cost
56 m², 19 m²A$5,202
111 m², 37 m²A$10,394
223 m², 74 m²A$20,637

Where the money goes

  • LaborA$5,541 (74%)
  • MaterialsA$1,929 (26%)

Materials A$1,929 · Labor A$5,541 (53 hours) · Equipment, disposal & permits A$0 — before contingency, contractor overhead & profit and tax.

Western Australia vs. Australia average

A typical drywall installation in Western Australia costs 6% more than the Australia average (A$10,394 vs. A$9,796). The difference comes mainly from local wages — a carpenter earns on average A$55.85 per hour in Western Australia — and from regional material prices and GST of 10%.

Drywall Installation in Western Australia: local factors

Western Australia ranks 2nd of 8 states and territories for drywall installation cost (1 = most expensive) — among the most expensive.

Nearby regionTypical costvs. Western Australia
Western AustraliaA$10,394—
Northern TerritoryA$9,827-5%
South AustraliaA$9,328-10%

Permits & contractor licensing in Western Australia

  • Contractor license: Builders and trades must be licensed or registered in Western Australia, and most states require home warranty insurance above a contract value.
  • Building code: Work must comply with the National Construction Code (NCC) and Australian Standards.
  • Permits: Building approval comes from your council or a private building certifier.

Rules vary by city — always confirm with your local building department before work starts.

Labor rates for this project in Western Australia

TradeHoursAvg. wage / hourInstalled rate / hour
Drywall installer45A$53.06A$106.12
Painter8A$49.15A$98.30
  • Labor wages: Australian Bureau of Statistics (ABS), Average Weekly Earnings — construction industry, adjusted by state — data period May 2026, last checked November 21, 2026.
  • Material prices & exchange rate: North American average material prices converted with European Central Bank reference rates (Frankfurter API) and a regional price factor — data period 2026-11-20, last checked November 21, 2026.

What a drywall installation includes

Drywall cost depends on the board area, board type, ceiling height and finish level. Level 4 is standard for flat paint; level 5 is for gloss paint and critical lighting.

Main cost factors

  • Wall and ceiling area
  • Board type
  • Finish level
  • Ceiling height

How to save money

  • Use moisture-resistant board in bathrooms and fire-rated board in garages.
  • Larger 4×12 sheets mean fewer seams on long walls.
  • Hire a separate finisher for high-visibility areas.
  • Prime with drywall primer before painting.

Timeline

3–7 days including drying time between coats.

Permits

Usually part of a larger remodel permit; fire-rated assemblies need inspection.

Frequently asked questions

How much does a drywall installation cost in Western Australia?

A typical drywall installation in Western Australia costs about A$10,394, with most projects between A$9,147 and A$11,953. That is about A$70 per m² of board area.

How much of the cost is labor?

Labor is about 74% of the direct cost (53 work hours) for a typical project in Western Australia. Materials are A$1,929 and equipment, disposal and permits A$0, before contingency, contractor overhead and tax.

Is a drywall installation cheaper in Western Australia than in nearby regions?

A typical drywall installation costs A$10,394 in Western Australia. Among nearby regions, South Australia is the lowest at A$9,328 and Northern Territory the highest at A$9,827. Differences come mostly from local wages, material prices and taxes.

Do I need a licensed contractor in Western Australia?

Builders and trades must be licensed or registered in Western Australia, and most states require home warranty insurance above a contract value.

How long does a drywall installation take?

3–7 days including drying time between coats.

Do I need a permit for a drywall installation?

Usually part of a larger remodel permit; fire-rated assemblies need inspection.

How many drywall sheets do I need?

The breakdown shows the sheet count for your wall and ceiling area with 10% extra.

What is the cost per square foot to hang and finish drywall?

See the cost per square foot under the total.

Can I change the contractor markup or contingency?

Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.

Drywall Installation cost in other states

Compare drywall installation costs in every state, province and territory →

More cost calculators for Western Australia

Choose your location

NSW New South WalesVIC VictoriaQLD QueenslandSA South AustraliaWA Western AustraliaTAS TasmaniaNT Northern TerritoryACT Australian Capital Territory