Drywall Installation Cost Calculator — South Dakota
Average drywall installation cost in South Dakota: $5,084 (typical range $4,474–$5,847, $3 per sq ft of board area). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from South Dakota pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a drywall installation cost in South Dakota?
Based on current South Dakota labor rates and material prices, a typical drywall installation costs about $5,084. Most projects fall between $4,474 and $5,847, or roughly $3 per sq ft of board area. This example assumes: wall area 1,200 sq ft, ceiling area 400 sq ft, sheets 56, finish Level 4.
Cost by project size
| Project size | Estimated cost |
|---|---|
| 600 sq ft, 200 sq ft | $2,545 |
| 1,200 sq ft, 400 sq ft | $5,084 |
| 2,400 sq ft, 800 sq ft | $10,063 |
Where the money goes
- Labor$2,553 (64%)
- Materials$1,418 (36%)
Materials $1,418 · Labor $2,553 (53 hours) · Equipment, disposal & permits $0 — before contingency, contractor overhead & profit and tax.
South Dakota vs. United States average
A typical drywall installation in South Dakota costs 14% less than the United States average ($5,084 vs. $5,891). The difference comes mainly from local wages — a carpenter earns on average $24.68 per hour in South Dakota — and from regional material prices and Sales tax (materials) of 4.2%.
Drywall Installation in South Dakota: local factors
South Dakota ranks 36th of 51 states for drywall installation cost (1 = most expensive) — among the most affordable.
| Nearby state | Typical cost | vs. South Dakota |
|---|---|---|
| South Dakota | $5,084 | — |
| Iowa | $5,268 | +4% |
| Minnesota | $6,109 | +20% |
| Montana | $5,665 | +11% |
| Nebraska | $5,100 | 0% |
| North Dakota | $5,001 | -2% |
| Wyoming | $4,922 | -3% |
Permits & contractor licensing in South Dakota
- Contractor license: Licensing rules in South Dakota depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
- Building code: Building codes in South Dakota are based on the International Residential Code, adopted with local amendments.
- Permits: Building permits are issued by your city or county building department.
Rules vary by city — always confirm with your local building department before work starts.
Labor rates for this project in South Dakota
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Drywall installer | 45 | $24.40 | $48.80 |
| Painter | 8 | $22.94 | $45.88 |
- Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
- Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.
What a drywall installation includes
Drywall cost depends on the board area, board type, ceiling height and finish level. Level 4 is standard for flat paint; level 5 is for gloss paint and critical lighting.
Main cost factors
- Wall and ceiling area
- Board type
- Finish level
- Ceiling height
How to save money
- Use moisture-resistant board in bathrooms and fire-rated board in garages.
- Larger 4×12 sheets mean fewer seams on long walls.
- Hire a separate finisher for high-visibility areas.
- Prime with drywall primer before painting.
Timeline
3–7 days including drying time between coats.
Permits
Usually part of a larger remodel permit; fire-rated assemblies need inspection.
Frequently asked questions
How much does a drywall installation cost in South Dakota?
A typical drywall installation in South Dakota costs about $5,084, with most projects between $4,474 and $5,847. That is about $3 per sq ft of board area.
How much of the cost is labor?
Labor is about 64% of the direct cost (53 work hours) for a typical project in South Dakota. Materials are $1,418 and equipment, disposal and permits $0, before contingency, contractor overhead and tax.
Is a drywall installation cheaper in South Dakota than in nearby states?
A typical drywall installation costs $5,084 in South Dakota. Among nearby states, Wyoming is the lowest at $4,922 and Minnesota the highest at $6,109. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in South Dakota?
Licensing rules in South Dakota depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
How long does a drywall installation take?
3–7 days including drying time between coats.
Do I need a permit for a drywall installation?
Usually part of a larger remodel permit; fire-rated assemblies need inspection.
How many drywall sheets do I need?
The breakdown shows the sheet count for your wall and ceiling area with 10% extra.
What is the cost per square foot to hang and finish drywall?
See the cost per square foot under the total.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Drywall Installation cost in other states
Compare drywall installation costs in every state, province and territory →