Drywall Installation Cost Calculator — Pennsylvania
Average drywall installation cost in Pennsylvania: $5,842 (typical range $5,141–$6,718, $4 per sq ft of board area). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from Pennsylvania pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a drywall installation cost in Pennsylvania?
Based on current Pennsylvania labor rates and material prices, a typical drywall installation costs about $5,842. Most projects fall between $5,141 and $6,718, or roughly $4 per sq ft of board area. This example assumes: wall area 1,200 sq ft, ceiling area 400 sq ft, sheets 56, finish Level 4.
Cost by project size
| Project size | Estimated cost |
|---|---|
| 600 sq ft, 200 sq ft | $2,924 |
| 1,200 sq ft, 400 sq ft | $5,842 |
| 2,400 sq ft, 800 sq ft | $11,574 |
Where the money goes
- Labor$3,087 (68%)
- Materials$1,461 (32%)
Materials $1,461 · Labor $3,087 (53 hours) · Equipment, disposal & permits $0 — before contingency, contractor overhead & profit and tax.
Pennsylvania vs. United States average
A typical drywall installation in Pennsylvania costs 1% less than the United States average ($5,842 vs. $5,891). The difference comes mainly from local wages — a carpenter earns on average $30.39 per hour in Pennsylvania — and from regional material prices and Sales tax (materials) of 6%.
Drywall Installation in Pennsylvania: local factors
Pennsylvania ranks 15th of 51 states for drywall installation cost (1 = most expensive) — among the most expensive.
| Nearby state | Typical cost | vs. Pennsylvania |
|---|---|---|
| Pennsylvania | $5,842 | — |
| Delaware | $5,173 | -11% |
| Maryland | $5,501 | -6% |
| New Jersey | $7,064 | +21% |
| New York | $6,475 | +11% |
| Ohio | $5,734 | -2% |
| West Virginia | $5,203 | -11% |
Permits & contractor licensing in Pennsylvania
- Contractor license: Home improvement contractors who do more than $5,000 of work a year must register with the Pennsylvania Attorney General (Home Improvement Consumer Protection Act), and contracts over $500 must be in writing.
- Building code: The Pennsylvania Uniform Construction Code (UCC) applies statewide and is enforced by the municipality or its third-party inspection agency.
- Permits: Apply with your municipality (or its code agency). Philadelphia issues permits through the Department of Licenses and Inspections.
Verify a contractor: Pennsylvania Office of Attorney General – Home Improvement ↗. Rules change — always confirm with your local building department.
Labor rates for this project in Pennsylvania
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Drywall installer | 45 | $29.80 | $59.60 |
| Painter | 8 | $26.07 | $52.14 |
- Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
- Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.
What a drywall installation includes
Drywall cost depends on the board area, board type, ceiling height and finish level. Level 4 is standard for flat paint; level 5 is for gloss paint and critical lighting.
Main cost factors
- Wall and ceiling area
- Board type
- Finish level
- Ceiling height
How to save money
- Use moisture-resistant board in bathrooms and fire-rated board in garages.
- Larger 4×12 sheets mean fewer seams on long walls.
- Hire a separate finisher for high-visibility areas.
- Prime with drywall primer before painting.
Timeline
3–7 days including drying time between coats.
Permits
Usually part of a larger remodel permit; fire-rated assemblies need inspection.
Frequently asked questions
How much does a drywall installation cost in Pennsylvania?
A typical drywall installation in Pennsylvania costs about $5,842, with most projects between $5,141 and $6,718. That is about $4 per sq ft of board area.
How much of the cost is labor?
Labor is about 68% of the direct cost (53 work hours) for a typical project in Pennsylvania. Materials are $1,461 and equipment, disposal and permits $0, before contingency, contractor overhead and tax.
Is a drywall installation cheaper in Pennsylvania than in nearby states?
A typical drywall installation costs $5,842 in Pennsylvania. Among nearby states, Delaware is the lowest at $5,173 and New Jersey the highest at $7,064. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in Pennsylvania?
Home improvement contractors who do more than $5,000 of work a year must register with the Pennsylvania Attorney General (Home Improvement Consumer Protection Act), and contracts over $500 must be in writing.
How long does a drywall installation take?
3–7 days including drying time between coats.
Do I need a permit for a drywall installation?
Usually part of a larger remodel permit; fire-rated assemblies need inspection.
How many drywall sheets do I need?
The breakdown shows the sheet count for your wall and ceiling area with 10% extra.
What is the cost per square foot to hang and finish drywall?
See the cost per square foot under the total.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Drywall Installation cost in other states
Compare drywall installation costs in every state, province and territory →