Drywall Installation Cost Calculator — District of Columbia
Average drywall installation cost in District of Columbia: $6,625 (typical range $5,830–$7,619, $4 per sq ft of board area). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from District of Columbia pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a drywall installation cost in District of Columbia?
Based on current District of Columbia labor rates and material prices, a typical drywall installation costs about $6,625. Most projects fall between $5,830 and $7,619, or roughly $4 per sq ft of board area. This example assumes: wall area 1,200 sq ft, ceiling area 400 sq ft, sheets 56, finish Level 4.
Cost by project size
| Project size | Estimated cost |
|---|---|
| 600 sq ft, 200 sq ft | $3,316 |
| 1,200 sq ft, 400 sq ft | $6,625 |
| 2,400 sq ft, 800 sq ft | $13,134 |
Where the money goes
- Labor$3,617 (70%)
- Materials$1,547 (30%)
Materials $1,547 · Labor $3,617 (53 hours) · Equipment, disposal & permits $0 — before contingency, contractor overhead & profit and tax.
District of Columbia vs. United States average
A typical drywall installation in District of Columbia costs 12% more than the United States average ($6,625 vs. $5,891). The difference comes mainly from local wages — a carpenter earns on average $31.73 per hour in District of Columbia — and from regional material prices and Sales tax (materials) of 6%.
Drywall Installation in District of Columbia: local factors
District of Columbia ranks 6th of 51 states for drywall installation cost (1 = most expensive) — among the most expensive.
| Nearby state | Typical cost | vs. District of Columbia |
|---|---|---|
| District of Columbia | $6,625 | — |
| Maryland | $5,501 | -17% |
| Virginia | $5,380 | -19% |
Permits & contractor licensing in District of Columbia
- Contractor license: Licensing rules in District of Columbia depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
- Building code: Building codes in District of Columbia are based on the International Residential Code, adopted with local amendments.
- Permits: Building permits are issued by your city or county building department.
Rules vary by city — always confirm with your local building department before work starts.
Labor rates for this project in District of Columbia
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Drywall installer | 45 | $35.02 | $70.04 |
| Painter | 8 | $29.92 | $59.84 |
- Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
- Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.
What a drywall installation includes
Drywall cost depends on the board area, board type, ceiling height and finish level. Level 4 is standard for flat paint; level 5 is for gloss paint and critical lighting.
Main cost factors
- Wall and ceiling area
- Board type
- Finish level
- Ceiling height
How to save money
- Use moisture-resistant board in bathrooms and fire-rated board in garages.
- Larger 4×12 sheets mean fewer seams on long walls.
- Hire a separate finisher for high-visibility areas.
- Prime with drywall primer before painting.
Timeline
3–7 days including drying time between coats.
Permits
Usually part of a larger remodel permit; fire-rated assemblies need inspection.
Frequently asked questions
How much does a drywall installation cost in District of Columbia?
A typical drywall installation in District of Columbia costs about $6,625, with most projects between $5,830 and $7,619. That is about $4 per sq ft of board area.
How much of the cost is labor?
Labor is about 70% of the direct cost (53 work hours) for a typical project in District of Columbia. Materials are $1,547 and equipment, disposal and permits $0, before contingency, contractor overhead and tax.
Is a drywall installation cheaper in District of Columbia than in nearby states?
A typical drywall installation costs $6,625 in District of Columbia. Among nearby states, Virginia is the lowest at $5,380 and Maryland the highest at $5,501. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in District of Columbia?
Licensing rules in District of Columbia depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
How long does a drywall installation take?
3–7 days including drying time between coats.
Do I need a permit for a drywall installation?
Usually part of a larger remodel permit; fire-rated assemblies need inspection.
How many drywall sheets do I need?
The breakdown shows the sheet count for your wall and ceiling area with 10% extra.
What is the cost per square foot to hang and finish drywall?
See the cost per square foot under the total.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Drywall Installation cost in other states
Compare drywall installation costs in every state, province and territory →