Block Wall Fence Cost Calculator — South Dakota
Average block wall fence cost in South Dakota: $20,104 (typical range $17,692–$23,120, $201 per linear foot). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from South Dakota pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a block wall fence cost in South Dakota?
Based on current South Dakota labor rates and material prices, a typical block wall fence costs about $20,104. Most projects fall between $17,692 and $23,120, or roughly $201 per linear foot. This example assumes: length 100 ft, height 6 ft, blocks 709, face area 600 sq ft.
Cost by project size
| Project size | Estimated cost |
|---|---|
| 50 ft | $11,724 |
| 100 ft | $20,104 |
| 200 ft | $37,345 |
Where the money goes
- Block wall$9,670 (62%)
- Excavation & footing$4,017 (26%)
- Gates$793 (5%)
- Permit & engineering$706 (5%)
- Cap & finish$497 (3%)
Materials $6,296 · Labor $7,776 (152 hours) · Equipment, disposal & permits $1,611 — before contingency, contractor overhead & profit and tax.
South Dakota vs. United States average
A typical block wall fence in South Dakota costs 7% less than the United States average ($20,104 vs. $21,702). The difference comes mainly from local wages — a carpenter earns on average $24.68 per hour in South Dakota — and from regional material prices and Sales tax (materials) of 4.2%.
Block Wall Fence in South Dakota: local factors
South Dakota ranks 36th of 51 states for block wall fence cost (1 = most expensive) — among the most affordable.
| Nearby state | Typical cost | vs. South Dakota |
|---|---|---|
| South Dakota | $20,104 | — |
| Iowa | $21,251 | +6% |
| Minnesota | $25,395 | +26% |
| Montana | $20,498 | +2% |
| Nebraska | $20,315 | +1% |
| North Dakota | $22,150 | +10% |
| Wyoming | $20,840 | +4% |
What affects the price in South Dakota
- Deep frost: Posts and footings must go below the frost line — usually 42–60 in. (1.1–1.5 m) here — which means more digging and concrete per post.
Permits & contractor licensing in South Dakota
- Contractor license: Licensing rules in South Dakota depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
- Building code: Building codes in South Dakota are based on the International Residential Code, adopted with local amendments.
- Permits: Building permits are issued by your city or county building department.
Rules vary by city — always confirm with your local building department before work starts.
Labor rates for this project in South Dakota
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Brick / block mason | 75 | $29.34 | $58.68 |
| Construction laborer | 65 | $21.30 | $42.60 |
| Cement mason / concrete finisher | 8 | $23.46 | $46.92 |
| Ironworker / welder | 4 | $28.60 | $57.20 |
- Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
- Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.
What a block wall fence includes
A concrete block (CMU) wall needs a reinforced footing, vertical rebar grouted into the cells, horizontal reinforcement, mortar and a cap. Stucco or paint finish adds cost and life. Walls over 4 ft often need engineering.
Main cost factors
- Wall length and height
- Block type
- Footing and rebar
- Pilasters and cap
- Stucco or paint finish
How to save money
- Closer rebar spacing is required in high-wind and seismic areas.
- Split-face block looks finished without stucco.
- Pilasters every 10–16 ft stiffen tall walls.
- Plan drainage behind walls that hold back soil.
Timeline
1–3 weeks depending on length.
Permits
Walls over 4 ft (or retaining walls) usually need a permit and engineered design.
Frequently asked questions
How much does a block wall fence cost in South Dakota?
A typical block wall fence in South Dakota costs about $20,104, with most projects between $17,692 and $23,120. That is about $201 per linear foot.
How much of the cost is labor?
Labor is about 50% of the direct cost (152 work hours) for a typical project in South Dakota. Materials are $6,296 and equipment, disposal and permits $1,611, before contingency, contractor overhead and tax.
Is a block wall fence cheaper in South Dakota than in nearby states?
A typical block wall fence costs $20,104 in South Dakota. Among nearby states, Nebraska is the lowest at $20,315 and Minnesota the highest at $25,395. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in South Dakota?
Licensing rules in South Dakota depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
What local conditions affect block wall fence costs in South Dakota?
Posts and footings must go below the frost line — usually 42–60 in. (1.1–1.5 m) here — which means more digging and concrete per post.
How long does a block wall fence take?
1–3 weeks depending on length.
Do I need a permit for a block wall fence?
Walls over 4 ft (or retaining walls) usually need a permit and engineered design.
How many blocks do I need?
The breakdown shows the block count (wall face area ÷ 0.89 sq ft per block + 5%).
Block wall or wood fence?
Block walls cost more but last 50+ years and block noise.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Block Wall Fence cost in other states
Compare block wall fence costs in every state, province and territory →