Drywall Installation Cost Calculator — Wyoming

Average drywall installation cost in Wyoming: $4,922 (typical range $4,331–$5,660, $3 per sq ft of board area). Enter your own sizes below for an itemized estimate. Updated November 2026

Loading calculator…

How much does a drywall installation cost in Wyoming?

Based on current Wyoming labor rates and material prices, a typical drywall installation costs about $4,922. Most projects fall between $4,331 and $5,660, or roughly $3 per sq ft of board area. This example assumes: wall area 1,200 sq ft, ceiling area 400 sq ft, sheets 56, finish Level 4.

Cost by project size

Project sizeEstimated cost
600 sq ft, 200 sq ft$2,464
1,200 sq ft, 400 sq ft$4,922
2,400 sq ft, 800 sq ft$9,736

Where the money goes

  • Labor$2,383 (62%)
  • Materials$1,461 (38%)

Materials $1,461 · Labor $2,383 (53 hours) · Equipment, disposal & permits $0 — before contingency, contractor overhead & profit and tax.

Wyoming vs. United States average

A typical drywall installation in Wyoming costs 16% less than the United States average ($4,922 vs. $5,891). The difference comes mainly from local wages — a carpenter earns on average $28.53 per hour in Wyoming — and from regional material prices and Sales tax (materials) of 4%.

Drywall Installation in Wyoming: local factors

Wyoming ranks 44th of 51 states for drywall installation cost (1 = most expensive) — among the most affordable.

Nearby stateTypical costvs. Wyoming
Wyoming$4,922—
Colorado$5,833+19%
Idaho$4,969+1%
Montana$5,665+15%
Nebraska$5,100+4%
South Dakota$5,084+3%
Utah$5,219+6%

Permits & contractor licensing in Wyoming

  • Contractor license: Licensing rules in Wyoming depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
  • Building code: Building codes in Wyoming are based on the International Residential Code, adopted with local amendments.
  • Permits: Building permits are issued by your city or county building department.

Rules vary by city — always confirm with your local building department before work starts.

Labor rates for this project in Wyoming

TradeHoursAvg. wage / hourInstalled rate / hour
Drywall installer45$22.51$45.02
Painter8$22.89$45.78
  • Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
  • Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.

What a drywall installation includes

Drywall cost depends on the board area, board type, ceiling height and finish level. Level 4 is standard for flat paint; level 5 is for gloss paint and critical lighting.

Main cost factors

  • Wall and ceiling area
  • Board type
  • Finish level
  • Ceiling height

How to save money

  • Use moisture-resistant board in bathrooms and fire-rated board in garages.
  • Larger 4×12 sheets mean fewer seams on long walls.
  • Hire a separate finisher for high-visibility areas.
  • Prime with drywall primer before painting.

Timeline

3–7 days including drying time between coats.

Permits

Usually part of a larger remodel permit; fire-rated assemblies need inspection.

Frequently asked questions

How much does a drywall installation cost in Wyoming?

A typical drywall installation in Wyoming costs about $4,922, with most projects between $4,331 and $5,660. That is about $3 per sq ft of board area.

How much of the cost is labor?

Labor is about 62% of the direct cost (53 work hours) for a typical project in Wyoming. Materials are $1,461 and equipment, disposal and permits $0, before contingency, contractor overhead and tax.

Is a drywall installation cheaper in Wyoming than in nearby states?

A typical drywall installation costs $4,922 in Wyoming. Among nearby states, Idaho is the lowest at $4,969 and Colorado the highest at $5,833. Differences come mostly from local wages, material prices and taxes.

Do I need a licensed contractor in Wyoming?

Licensing rules in Wyoming depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.

How long does a drywall installation take?

3–7 days including drying time between coats.

Do I need a permit for a drywall installation?

Usually part of a larger remodel permit; fire-rated assemblies need inspection.

How many drywall sheets do I need?

The breakdown shows the sheet count for your wall and ceiling area with 10% extra.

What is the cost per square foot to hang and finish drywall?

See the cost per square foot under the total.

Can I change the contractor markup or contingency?

Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.

Drywall Installation cost in other states

Compare drywall installation costs in every state, province and territory →

More cost calculators for Wyoming

Choose your location

AL AlabamaAK AlaskaAZ ArizonaAR ArkansasCA CaliforniaCO ColoradoCT ConnecticutDE DelawareDC District of ColumbiaFL FloridaGA GeorgiaHI HawaiiID IdahoIL IllinoisIN IndianaIA IowaKS KansasKY KentuckyLA LouisianaME MaineMD MarylandMA MassachusettsMI MichiganMN MinnesotaMS MississippiMO MissouriMT MontanaNE NebraskaNV NevadaNH New HampshireNJ New JerseyNM New MexicoNY New YorkNC North CarolinaND North DakotaOH OhioOK OklahomaOR OregonPA PennsylvaniaRI Rhode IslandSC South CarolinaSD South DakotaTN TennesseeTX TexasUT UtahVT VermontVA VirginiaWA WashingtonWV West VirginiaWI WisconsinWY Wyoming