Whole-Home Renovation Cost Calculator — Wyoming

Average whole-home renovation cost in Wyoming: $100,691 (typical range $88,608–$115,795, $92 per sq ft). Enter your own sizes below for an itemized estimate. Updated November 2026

Loading calculator…

Free · No obligation

Get up to 3 free quotes from Wyoming pros

  • Compare real prices with your estimate
  • Local, licensed and insured contractors
  • Takes 30 seconds — your estimate is attached

How much does a whole-home renovation cost in Wyoming?

Based on current Wyoming labor rates and material prices, a typical whole-home renovation costs about $100,691. Most projects fall between $88,608 and $115,795, or roughly $92 per sq ft. This example assumes: floor area 1,100 sq ft, rooms 4, bathrooms 2, condition Bare shell (new build, nothing inside).

Cost by finish level

Finish levelEstimated costTypical range
Economy (budget)$82,545$72,640 – $94,927
Standard (mid-range)$100,691$88,608 – $115,795
Premium (high-end)$145,161$127,742 – $166,935

Cost by project size

Project sizeEstimated cost
600 sq ft, 2 rooms, 1 bathrooms$61,087
1,100 sq ft, 4 rooms, 2 bathrooms$100,691
2,000 sq ft, 6 rooms, 3 bathrooms$156,333

Where the money goes

  • Bathroom & kitchen fixtures$17,569 (22%)
  • Wall plastering & floor screed$8,940 (11%)
  • Partition walls$8,645 (11%)
  • Tile$7,528 (10%)
  • Electrical wiring$6,132 (8%)
  • Painting$5,241 (7%)
  • Electrical fixtures & lighting$4,967 (6%)
  • Flooring$4,320 (6%)

Materials $40,237 · Labor $33,820 (604 hours) · Equipment, disposal & permits $4,268 — before contingency, contractor overhead & profit and tax.

Wyoming vs. United States average

A typical whole-home renovation in Wyoming costs 4% less than the United States average ($100,691 vs. $104,819). The difference comes mainly from local wages — a carpenter earns on average $28.53 per hour in Wyoming — and from regional material prices and Sales tax (materials) of 4%.

Whole-Home Renovation in Wyoming: local factors

Wyoming ranks 29th of 51 states for whole-home renovation cost (1 = most expensive) — in the middle.

Nearby stateTypical costvs. Wyoming
Wyoming$100,691—
Colorado$103,659+3%
Idaho$98,483-2%
Montana$102,442+2%
Nebraska$97,929-3%
South Dakota$96,623-4%
Utah$98,760-2%

What affects the price in Wyoming

  • Long heating season: The energy code requires high insulation levels and air sealing, which adds to the cost of new walls and attics.

Permits & contractor licensing in Wyoming

  • Contractor license: Licensing rules in Wyoming depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
  • Building code: Building codes in Wyoming are based on the International Residential Code, adopted with local amendments.
  • Permits: Building permits are issued by your city or county building department.

Rules vary by city — always confirm with your local building department before work starts.

Labor rates for this project in Wyoming

TradeHoursAvg. wage / hourInstalled rate / hour
Brick / block mason99$30.55$61.10
Electrician98$35.99$71.98
Drywall installer94$22.51$45.02
Tile & stone setter83$25.40$50.80
Painter80$22.89$45.78
Plumber67$29.76$59.52
Carpenter39$28.53$57.06
Floor layer22$26.47$52.94
Cement mason / concrete finisher22$28.62$57.24
  • Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
  • Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.

What a whole-home renovation includes

A whole-home renovation covers everything inside: walls, electrical and plumbing rough-in, heating, plaster, screed, drywall, waterproofing, tile, paint, flooring, doors, lighting and bathroom fixtures. Starting from a bare shell costs the most; a cosmetic refresh the least.

Main cost factors

  • Floor area and number of rooms
  • Starting condition (shell, dated, good)
  • Number of bathrooms
  • Finish package
  • Electrical, plumbing and heating scope

How to save money

  • Finish all “wet” work (plaster, screed, tile) before flooring and paint.
  • Buy tile, flooring and doors early — delivery delays stop the whole job.
  • Keep 10% of the budget for surprises behind walls.
  • Electrical and plumbing points are cheaper to add before plastering than later.

Timeline

2–4 months for a 1,000–1,500 sq ft home or apartment.

Permits

Electrical, plumbing and any wall changes need permits; cosmetic work usually does not.

Frequently asked questions

How much does a whole-home renovation cost in Wyoming?

A typical whole-home renovation in Wyoming costs about $100,691, with most projects between $88,608 and $115,795. Economy finishes start around $82,545 and premium projects reach $145,161. That is about $92 per sq ft.

How much of the cost is labor?

Labor is about 43% of the direct cost (604 work hours) for a typical project in Wyoming. Materials are $40,237 and equipment, disposal and permits $4,268, before contingency, contractor overhead and tax.

Is a whole-home renovation cheaper in Wyoming than in nearby states?

A typical whole-home renovation costs $100,691 in Wyoming. Among nearby states, South Dakota is the lowest at $96,623 and Colorado the highest at $103,659. Differences come mostly from local wages, material prices and taxes.

Do I need a licensed contractor in Wyoming?

Licensing rules in Wyoming depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.

What local conditions affect whole-home renovation costs in Wyoming?

The energy code requires high insulation levels and air sealing, which adds to the cost of new walls and attics.

How long does a whole-home renovation take?

2–4 months for a 1,000–1,500 sq ft home or apartment.

Do I need a permit for a whole-home renovation?

Electrical, plumbing and any wall changes need permits; cosmetic work usually does not.

How much does it cost to renovate per square foot?

See the cost per square foot under the total. It depends mostly on the starting condition and finish package.

What should I renovate first?

Infrastructure first (wiring, plumbing, heating, windows), then walls and floors, then finishes and fixtures.

Can I change the contractor markup or contingency?

Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.

Whole-Home Renovation cost in other states

Compare whole-home renovation costs in every state, province and territory →

More cost calculators for Wyoming

Choose your location

AL AlabamaAK AlaskaAZ ArizonaAR ArkansasCA CaliforniaCO ColoradoCT ConnecticutDE DelawareDC District of ColumbiaFL FloridaGA GeorgiaHI HawaiiID IdahoIL IllinoisIN IndianaIA IowaKS KansasKY KentuckyLA LouisianaME MaineMD MarylandMA MassachusettsMI MichiganMN MinnesotaMS MississippiMO MissouriMT MontanaNE NebraskaNV NevadaNH New HampshireNJ New JerseyNM New MexicoNY New YorkNC North CarolinaND North DakotaOH OhioOK OklahomaOR OregonPA PennsylvaniaRI Rhode IslandSC South CarolinaSD South DakotaTN TennesseeTX TexasUT UtahVT VermontVA VirginiaWA WashingtonWV West VirginiaWI WisconsinWY Wyoming