Roof Replacement Cost Calculator — Victoria

Average roof replacement cost in Victoria: A$25,951 (typical range A$22,837–A$29,844, A$123 per m² of roof area). Enter your own sizes below for an itemized estimate. Updated November 2026

Loading calculator…

Free · No obligation

Get up to 3 free quotes from Victoria pros

  • Compare real prices with your estimate
  • Local, licensed and insured contractors
  • Takes 30 seconds — your estimate is attached

How much does a roof replacement cost in Victoria?

Based on current Victoria labor rates and material prices, a typical roof replacement costs about A$25,951. Most projects fall between A$22,837 and A$29,844, or roughly A$123 per m² of roof area. This example assumes: footprint 167 m², roof area 212 m², roofing squares 22.8 sq, material Architectural shingles.

Cost by project size

Project sizeEstimated cost
93 m²A$16,175
139 m²A$22,156
186 m²A$29,754
279 m²A$41,708

Where the money goes

  • RoofingA$17,079 (92%)
  • Permits & setupA$976 (5%)
  • Roof deckingA$595 (3%)

Materials A$7,292 · Labor A$7,869 (86 hours) · Equipment, disposal & permits A$3,489 — before contingency, contractor overhead & profit and tax.

Victoria vs. Australia average

A typical roof replacement in Victoria costs 1% less than the Australia average (A$25,951 vs. A$26,327). The difference comes mainly from local wages — a carpenter earns on average A$51.18 per hour in Victoria — and from regional material prices and GST of 10%.

Roof Replacement in Victoria: local factors

Victoria ranks 5th of 8 states and territories for roof replacement cost (1 = most expensive) — in the middle.

Nearby regionTypical costvs. Victoria
VictoriaA$25,951—
New South WalesA$26,607+3%
South AustraliaA$25,276-3%
TasmaniaA$25,494-2%

What affects the price in Victoria

  • Bushfire-prone areas: Your block’s BAL rating (AS 3959) sets the required materials: BAL-29 and above need ember screens, toughened glass and non-combustible cladding/decking.

Permits & contractor licensing in Victoria

  • Contractor license: Builders and trades must be licensed or registered in Victoria, and most states require home warranty insurance above a contract value.
  • Building code: Work must comply with the National Construction Code (NCC) and Australian Standards.
  • Permits: Building approval comes from your council or a private building certifier.

Rules vary by city — always confirm with your local building department before work starts.

Labor rates for this project in Victoria

TradeHoursAvg. wage / hourInstalled rate / hour
Roofer61A$47.60A$95.20
Construction laborer25A$40.94A$81.88
  • Labor wages: Australian Bureau of Statistics (ABS), Average Weekly Earnings — construction industry, adjusted by state — data period May 2026, last checked November 21, 2026.
  • Material prices & exchange rate: North American average material prices converted with European Central Bank reference rates (Frankfurter API) and a regional price factor — data period 2026-11-20, last checked November 21, 2026.

What a roof replacement includes

Roofers price by the “square” (100 sq ft of roof). The total depends on roof area, pitch, the material, how many old layers must be torn off and how much decking is rotten. Steep and multi-story roofs need more safety equipment and labor.

Main cost factors

  • Roof area and pitch
  • Roofing material
  • Layers to tear off
  • Decking replacement
  • Chimneys, skylights and gutters

How to save money

  • Get the decking checked — replacing a few sheets now prevents leaks later.
  • Architectural shingles cost only slightly more than 3-tab but last longer.
  • Replace gutters and flashing at the same time to save on labor.
  • Book in the off-season for better availability.

Timeline

1–3 days for an asphalt roof on a typical house.

Permits

Most cities require a re-roofing permit; some limit the number of shingle layers to two.

Frequently asked questions

How much does a roof replacement cost in Victoria?

A typical roof replacement in Victoria costs about A$25,951, with most projects between A$22,837 and A$29,844. That is about A$123 per m² of roof area.

How much of the cost is labor?

Labor is about 42% of the direct cost (86 work hours) for a typical project in Victoria. Materials are A$7,292 and equipment, disposal and permits A$3,489, before contingency, contractor overhead and tax.

Is a roof replacement cheaper in Victoria than in nearby regions?

A typical roof replacement costs A$25,951 in Victoria. Among nearby regions, South Australia is the lowest at A$25,276 and New South Wales the highest at A$26,607. Differences come mostly from local wages, material prices and taxes.

Do I need a licensed contractor in Victoria?

Builders and trades must be licensed or registered in Victoria, and most states require home warranty insurance above a contract value.

What local conditions affect roof replacement costs in Victoria?

Your block’s BAL rating (AS 3959) sets the required materials: BAL-29 and above need ember screens, toughened glass and non-combustible cladding/decking.

How long does a roof replacement take?

1–3 days for an asphalt roof on a typical house.

Do I need a permit for a roof replacement?

Most cities require a re-roofing permit; some limit the number of shingle layers to two.

How do I measure my roof?

Enter your house footprint and pitch — the calculator converts it to roof area and squares.

Metal vs. shingles — which is cheaper long-term?

Metal costs more up front but lasts 40–70 years versus 20–30 for asphalt.

Can I change the contractor markup or contingency?

Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.

Roof Replacement cost in other states

Compare roof replacement costs in every state, province and territory →

More cost calculators for Victoria

Choose your location

NSW New South WalesVIC VictoriaQLD QueenslandSA South AustraliaWA Western AustraliaTAS TasmaniaNT Northern TerritoryACT Australian Capital Territory