Electrical Rewiring & Panel Cost Calculator — Victoria

Average electrical rewiring & panel cost in Victoria: A$49,075 (typical range A$43,186–A$56,436, A$293 per m²). Enter your own sizes below for an itemized estimate. Updated November 2026

Loading calculator…

How much does a electrical rewiring & panel cost in Victoria?

Based on current Victoria labor rates and material prices, a typical electrical rewiring & panel costs about A$49,075. Most projects fall between A$43,186 and A$56,436, or roughly A$293 per m². This example assumes: home size 167 m², scope Full rewire, panel 200 A, ev charger No.

Cost by project size

Project sizeEstimated cost
84 m²A$28,577
167 m²A$49,075
334 m²A$90,070

Where the money goes

  • RewiringA$22,408 (64%)
  • Wall repairA$6,623 (19%)
  • Service & panelA$4,478 (13%)
  • ExtrasA$1,344 (4%)
  • Permit & inspectionA$414 (1%)

Materials A$8,500 · Labor A$26,073 (230 hours) · Equipment, disposal & permits A$695 — before contingency, contractor overhead & profit and tax.

Victoria vs. Australia average

A typical electrical rewiring & panel in Victoria costs 2% less than the Australia average (A$49,075 vs. A$49,952). The difference comes mainly from local wages — a carpenter earns on average A$51.18 per hour in Victoria — and from regional material prices and GST of 10%.

Electrical Rewiring & Panel in Victoria: local factors

Victoria ranks 5th of 8 states and territories for electrical rewiring & panel cost (1 = most expensive) — in the middle.

Nearby regionTypical costvs. Victoria
VictoriaA$49,075—
New South WalesA$50,524+3%
South AustraliaA$47,560-3%
TasmaniaA$46,112-6%

Permits & contractor licensing in Victoria

  • Contractor license: Builders and trades must be licensed or registered in Victoria, and most states require home warranty insurance above a contract value.
  • Building code: Work must comply with the National Construction Code (NCC) and Australian Standards.
  • Permits: Building approval comes from your council or a private building certifier.

Rules vary by city — always confirm with your local building department before work starts.

Labor rates for this project in Victoria

TradeHoursAvg. wage / hourInstalled rate / hour
Electrician171A$59.37A$118.74
Drywall installer60A$48.62A$97.24
  • Labor wages: Australian Bureau of Statistics (ABS), Average Weekly Earnings — construction industry, adjusted by state — data period May 2026, last checked November 21, 2026.
  • Material prices & exchange rate: North American average material prices converted with European Central Bank reference rates (Frankfurter API) and a regional price factor — data period 2026-11-20, last checked November 21, 2026.

What a electrical rewiring & panel includes

Rewiring includes a new panel and service, new circuits fished through walls, outlets, switches and detectors, plus patching the access holes. Plaster walls take longer than drywall.

Main cost factors

  • Home size
  • Panel size
  • Full or partial rewire
  • Wall repair after rewiring
  • EV charger

How to save money

  • Upgrade to a 200 A panel if you plan an EV charger, heat pump or induction cooking.
  • Do rewiring before painting and flooring.
  • Add outlets and USB-C receptacles while walls are open.
  • Whole-home surge protection is inexpensive insurance.

Timeline

3–10 days for a full rewire.

Permits

Electrical permits and inspections are always required; utility coordination is needed for service upgrades.

Frequently asked questions

How much does a electrical rewiring & panel cost in Victoria?

A typical electrical rewiring & panel in Victoria costs about A$49,075, with most projects between A$43,186 and A$56,436. That is about A$293 per m².

How much of the cost is labor?

Labor is about 74% of the direct cost (230 work hours) for a typical project in Victoria. Materials are A$8,500 and equipment, disposal and permits A$695, before contingency, contractor overhead and tax.

Is a electrical rewiring & panel cheaper in Victoria than in nearby regions?

A typical electrical rewiring & panel costs A$49,075 in Victoria. Among nearby regions, Tasmania is the lowest at A$46,112 and New South Wales the highest at A$50,524. Differences come mostly from local wages, material prices and taxes.

Do I need a licensed contractor in Victoria?

Builders and trades must be licensed or registered in Victoria, and most states require home warranty insurance above a contract value.

How long does a electrical rewiring & panel take?

3–10 days for a full rewire.

Do I need a permit for a electrical rewiring & panel?

Electrical permits and inspections are always required; utility coordination is needed for service upgrades.

Do I need to rewire an old house?

Homes with knob-and-tube, aluminum branch wiring or a fuse box are strong candidates.

How much does a panel upgrade cost?

Choose “Panel upgrade only” to see just the panel and service cost.

Can I change the contractor markup or contingency?

Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.

Electrical Rewiring & Panel cost in other states

Compare electrical rewiring & panel costs in every state, province and territory →

More cost calculators for Victoria

Choose your location

NSW New South WalesVIC VictoriaQLD QueenslandSA South AustraliaWA Western AustraliaTAS TasmaniaNT Northern TerritoryACT Australian Capital Territory