Drywall Installation Cost Calculator — Victoria
Average drywall installation cost in Victoria: A$9,624 (typical range A$8,469–A$11,068, A$65 per m² of board area). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
How much does a drywall installation cost in Victoria?
Based on current Victoria labor rates and material prices, a typical drywall installation costs about A$9,624. Most projects fall between A$8,469 and A$11,068, or roughly A$65 per m² of board area. This example assumes: wall area 111 m², ceiling area 37 m², sheets 56, finish Level 4.
Cost by project size
| Project size | Estimated cost |
|---|---|
| 56 m², 19 m² | A$4,816 |
| 111 m², 37 m² | A$9,624 |
| 223 m², 74 m² | A$19,103 |
Where the money goes
- LaborA$5,077 (73%)
- MaterialsA$1,839 (27%)
Materials A$1,839 · Labor A$5,077 (53 hours) · Equipment, disposal & permits A$0 — before contingency, contractor overhead & profit and tax.
Victoria vs. Australia average
A typical drywall installation in Victoria costs 2% less than the Australia average (A$9,624 vs. A$9,796). The difference comes mainly from local wages — a carpenter earns on average A$51.18 per hour in Victoria — and from regional material prices and GST of 10%.
Drywall Installation in Victoria: local factors
Victoria ranks 5th of 8 states and territories for drywall installation cost (1 = most expensive) — in the middle.
| Nearby region | Typical cost | vs. Victoria |
|---|---|---|
| Victoria | A$9,624 | — |
| New South Wales | A$9,908 | +3% |
| South Australia | A$9,328 | -3% |
| Tasmania | A$9,050 | -6% |
Permits & contractor licensing in Victoria
- Contractor license: Builders and trades must be licensed or registered in Victoria, and most states require home warranty insurance above a contract value.
- Building code: Work must comply with the National Construction Code (NCC) and Australian Standards.
- Permits: Building approval comes from your council or a private building certifier.
Rules vary by city — always confirm with your local building department before work starts.
Labor rates for this project in Victoria
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Drywall installer | 45 | A$48.62 | A$97.24 |
| Painter | 8 | A$45.04 | A$90.08 |
- Labor wages: Australian Bureau of Statistics (ABS), Average Weekly Earnings — construction industry, adjusted by state — data period May 2026, last checked November 21, 2026.
- Material prices & exchange rate: North American average material prices converted with European Central Bank reference rates (Frankfurter API) and a regional price factor — data period 2026-11-20, last checked November 21, 2026.
What a drywall installation includes
Drywall cost depends on the board area, board type, ceiling height and finish level. Level 4 is standard for flat paint; level 5 is for gloss paint and critical lighting.
Main cost factors
- Wall and ceiling area
- Board type
- Finish level
- Ceiling height
How to save money
- Use moisture-resistant board in bathrooms and fire-rated board in garages.
- Larger 4×12 sheets mean fewer seams on long walls.
- Hire a separate finisher for high-visibility areas.
- Prime with drywall primer before painting.
Timeline
3–7 days including drying time between coats.
Permits
Usually part of a larger remodel permit; fire-rated assemblies need inspection.
Frequently asked questions
How much does a drywall installation cost in Victoria?
A typical drywall installation in Victoria costs about A$9,624, with most projects between A$8,469 and A$11,068. That is about A$65 per m² of board area.
How much of the cost is labor?
Labor is about 73% of the direct cost (53 work hours) for a typical project in Victoria. Materials are A$1,839 and equipment, disposal and permits A$0, before contingency, contractor overhead and tax.
Is a drywall installation cheaper in Victoria than in nearby regions?
A typical drywall installation costs A$9,624 in Victoria. Among nearby regions, Tasmania is the lowest at A$9,050 and New South Wales the highest at A$9,908. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in Victoria?
Builders and trades must be licensed or registered in Victoria, and most states require home warranty insurance above a contract value.
How long does a drywall installation take?
3–7 days including drying time between coats.
Do I need a permit for a drywall installation?
Usually part of a larger remodel permit; fire-rated assemblies need inspection.
How many drywall sheets do I need?
The breakdown shows the sheet count for your wall and ceiling area with 10% extra.
What is the cost per square foot to hang and finish drywall?
See the cost per square foot under the total.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Drywall Installation cost in other states
Compare drywall installation costs in every state, province and territory →