Roof Replacement Cost Calculator — Queensland
Average roof replacement cost in Queensland: A$25,795 (typical range A$22,700–A$29,664, A$122 per m² of roof area). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from Queensland pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a roof replacement cost in Queensland?
Based on current Queensland labor rates and material prices, a typical roof replacement costs about A$25,795. Most projects fall between A$22,700 and A$29,664, or roughly A$122 per m² of roof area. This example assumes: footprint 167 m², roof area 212 m², roofing squares 22.8 sq, material Architectural shingles.
Cost by project size
| Project size | Estimated cost |
|---|---|
| 93 m² | A$16,074 |
| 139 m² | A$22,020 |
| 186 m² | A$29,572 |
| 279 m² | A$41,458 |
Where the money goes
- RoofingA$16,979 (92%)
- Permits & setupA$966 (5%)
- Roof deckingA$592 (3%)
Materials A$7,220 · Labor A$7,863 (86 hours) · Equipment, disposal & permits A$3,455 — before contingency, contractor overhead & profit and tax.
Queensland vs. Australia average
A typical roof replacement in Queensland costs 2% less than the Australia average (A$25,795 vs. A$26,327). The difference comes mainly from local wages — a carpenter earns on average A$51.14 per hour in Queensland — and from regional material prices and GST of 10%.
Roof Replacement in Queensland: local factors
Queensland ranks 6th of 8 states and territories for roof replacement cost (1 = most expensive) — among the most affordable.
| Nearby region | Typical cost | vs. Queensland |
|---|---|---|
| Queensland | A$25,795 | — |
| New South Wales | A$26,607 | +3% |
| Northern Territory | A$27,999 | +9% |
| South Australia | A$25,276 | -2% |
What affects the price in Queensland
- Cyclone region: In cyclone regions roofs need cyclone-rated tie-downs and battens, and windows must meet the site wind classification (e.g. C1–C4).
- Bushfire-prone areas: Your block’s BAL rating (AS 3959) sets the required materials: BAL-29 and above need ember screens, toughened glass and non-combustible cladding/decking.
- Hot summers: Reflective “cool roof” shingles or light-colored metal reduce attic heat and cooling bills.
- Hail: Class 4 impact-resistant shingles cost about 10–25% more but qualify for insurance discounts in many hail-prone areas.
Permits & contractor licensing in Queensland
- Contractor license: Builders and trades must be licensed or registered in Queensland, and most states require home warranty insurance above a contract value.
- Building code: Work must comply with the National Construction Code (NCC) and Australian Standards.
- Permits: Building approval comes from your council or a private building certifier.
Rules vary by city — always confirm with your local building department before work starts.
Labor rates for this project in Queensland
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Roofer | 61 | A$47.56 | A$95.12 |
| Construction laborer | 25 | A$40.91 | A$81.82 |
- Labor wages: Australian Bureau of Statistics (ABS), Average Weekly Earnings — construction industry, adjusted by state — data period May 2026, last checked November 21, 2026.
- Material prices & exchange rate: North American average material prices converted with European Central Bank reference rates (Frankfurter API) and a regional price factor — data period 2026-11-20, last checked November 21, 2026.
What a roof replacement includes
Roofers price by the “square” (100 sq ft of roof). The total depends on roof area, pitch, the material, how many old layers must be torn off and how much decking is rotten. Steep and multi-story roofs need more safety equipment and labor.
Main cost factors
- Roof area and pitch
- Roofing material
- Layers to tear off
- Decking replacement
- Chimneys, skylights and gutters
How to save money
- Get the decking checked — replacing a few sheets now prevents leaks later.
- Architectural shingles cost only slightly more than 3-tab but last longer.
- Replace gutters and flashing at the same time to save on labor.
- Book in the off-season for better availability.
Timeline
1–3 days for an asphalt roof on a typical house.
Permits
Most cities require a re-roofing permit; some limit the number of shingle layers to two.
Frequently asked questions
How much does a roof replacement cost in Queensland?
A typical roof replacement in Queensland costs about A$25,795, with most projects between A$22,700 and A$29,664. That is about A$122 per m² of roof area.
How much of the cost is labor?
Labor is about 42% of the direct cost (86 work hours) for a typical project in Queensland. Materials are A$7,220 and equipment, disposal and permits A$3,455, before contingency, contractor overhead and tax.
Is a roof replacement cheaper in Queensland than in nearby regions?
A typical roof replacement costs A$25,795 in Queensland. Among nearby regions, South Australia is the lowest at A$25,276 and Northern Territory the highest at A$27,999. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in Queensland?
Builders and trades must be licensed or registered in Queensland, and most states require home warranty insurance above a contract value.
What local conditions affect roof replacement costs in Queensland?
In cyclone regions roofs need cyclone-rated tie-downs and battens, and windows must meet the site wind classification (e.g. C1–C4). Your block’s BAL rating (AS 3959) sets the required materials: BAL-29 and above need ember screens, toughened glass and non-combustible cladding/decking.
How long does a roof replacement take?
1–3 days for an asphalt roof on a typical house.
Do I need a permit for a roof replacement?
Most cities require a re-roofing permit; some limit the number of shingle layers to two.
How do I measure my roof?
Enter your house footprint and pitch — the calculator converts it to roof area and squares.
Metal vs. shingles — which is cheaper long-term?
Metal costs more up front but lasts 40–70 years versus 20–30 for asphalt.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Roof Replacement cost in other states
Compare roof replacement costs in every state, province and territory →