Iron & Metal Fence Cost Calculator — Tasmania
Average iron & metal fence cost in Tasmania: A$22,154 (typical range A$19,496–A$25,477, A$485 per metre). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from Tasmania pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a iron & metal fence cost in Tasmania?
Based on current Tasmania labor rates and material prices, a typical iron & metal fence costs about A$22,154. Most projects fall between A$19,496 and A$25,477, or roughly A$485 per metre. This example assumes: type Wrought iron / ornamental steel, length 45.7 m, height 1.5 m, gates 1 walk / 0 drive.
Cost by project size
| Project size | Estimated cost |
|---|---|
| 23 m | A$12,617 |
| 46 m | A$22,154 |
| 91 m | A$42,018 |
Where the money goes
- Fence materialsA$14,493 (91%)
- Gates & automationA$899 (6%)
- Permit & layoutA$530 (3%)
Materials A$11,937 · Labor A$3,809 (48 hours) · Equipment, disposal & permits A$176 — before contingency, contractor overhead & profit and tax.
Tasmania vs. Australia average
A typical iron & metal fence in Tasmania costs 1% less than the Australia average (A$22,154 vs. A$22,359). The difference comes mainly from local wages — a carpenter earns on average A$46.29 per hour in Tasmania — and from regional material prices and GST of 10%.
Iron & Metal Fence in Tasmania: local factors
Tasmania ranks 5th of 8 states and territories for iron & metal fence cost (1 = most expensive) — in the middle.
| Nearby region | Typical cost | vs. Tasmania |
|---|---|---|
| Tasmania | A$22,154 | — |
| Victoria | A$22,078 | -0% |
Permits & contractor licensing in Tasmania
- Contractor license: Builders and trades must be licensed or registered in Tasmania, and most states require home warranty insurance above a contract value.
- Building code: Work must comply with the National Construction Code (NCC) and Australian Standards.
- Permits: Building approval comes from your council or a private building certifier.
Rules vary by city — always confirm with your local building department before work starts.
Labor rates for this project in Tasmania
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Fence erector | 48 | A$39.35 | A$78.70 |
- Labor wages: Australian Bureau of Statistics (ABS), Average Weekly Earnings — construction industry, adjusted by state — data period May 2026, last checked November 21, 2026.
- Material prices & exchange rate: North American average material prices converted with European Central Bank reference rates (Frankfurter API) and a regional price factor — data period 2026-11-20, last checked November 21, 2026.
What a iron & metal fence includes
Metal fences range from budget chain link to ornamental aluminum and wrought iron. Driveway gates and automatic openers can cost as much as the fence itself.
Main cost factors
- Fence type
- Length and height
- Walk and driveway gates
- Automatic gate opener
- Finish (galvanized, powder coat)
How to save money
- Chain link is the cheapest way to enclose a large yard.
- Aluminum looks like iron but never rusts and costs less.
- Powder-coated steel lasts much longer than painted steel.
- Sliding gates suit sloped driveways; swing gates are cheaper on flat ground.
Timeline
2–5 days, plus 2–4 weeks for custom gates.
Permits
Permits are often required for fences over 6 ft and for electrical work on gate openers.
Frequently asked questions
How much does a iron & metal fence cost in Tasmania?
A typical iron & metal fence in Tasmania costs about A$22,154, with most projects between A$19,496 and A$25,477. That is about A$485 per metre.
How much of the cost is labor?
Labor is about 24% of the direct cost (48 work hours) for a typical project in Tasmania. Materials are A$11,937 and equipment, disposal and permits A$176, before contingency, contractor overhead and tax.
Is a iron & metal fence cheaper in Tasmania than in nearby regions?
A typical iron & metal fence costs A$22,154 in Tasmania. Among nearby regions, Victoria is the lowest at A$22,078. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in Tasmania?
Builders and trades must be licensed or registered in Tasmania, and most states require home warranty insurance above a contract value.
How long does a iron & metal fence take?
2–5 days, plus 2–4 weeks for custom gates.
Do I need a permit for a iron & metal fence?
Permits are often required for fences over 6 ft and for electrical work on gate openers.
Is wrought iron more expensive than aluminum?
Yes — compare both by switching the fence type above.
How much does an automatic gate opener cost?
Turn on “Automatic gate opener” to see opener, safety and wiring costs.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Iron & Metal Fence cost in other states
Compare iron & metal fence costs in every state, province and territory →