Concrete Driveway & Slab Cost Calculator — Tasmania
Average concrete driveway & slab cost in Tasmania: A$16,719 (typical range A$14,713–A$19,227, A$225 per m²). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from Tasmania pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a concrete driveway & slab cost in Tasmania?
Based on current Tasmania labor rates and material prices, a typical concrete driveway & slab costs about A$16,719. Most projects fall between A$14,713 and A$19,227, or roughly A$225 per m². This example assumes: size 12.2 m × 6.1 m, area 74 m², concrete 8.0 m³, thickness 4".
Cost by project size
| Project size | Estimated cost |
|---|---|
| 6.1 × 3 m | A$5,155 |
| 7.3 × 7.3 m | A$12,736 |
| 12 × 6.1 m | A$16,719 |
| 15 × 7.3 m | A$24,664 |
Where the money goes
- ConcreteA$8,034 (67%)
- Base & formsA$3,762 (31%)
- PermitA$219 (2%)
Materials A$5,329 · Labor A$5,625 (66 hours) · Equipment, disposal & permits A$1,061 — before contingency, contractor overhead & profit and tax.
Tasmania vs. Australia average
A typical concrete driveway & slab in Tasmania costs 4% less than the Australia average (A$16,719 vs. A$17,473). The difference comes mainly from local wages — a carpenter earns on average A$46.29 per hour in Tasmania — and from regional material prices and GST of 10%.
Concrete Driveway & Slab in Tasmania: local factors
Tasmania ranks 8th of 8 states and territories for concrete driveway & slab cost (1 = most expensive) — among the most affordable.
| Nearby region | Typical cost | vs. Tasmania |
|---|---|---|
| Tasmania | A$16,719 | — |
| Victoria | A$17,209 | +3% |
Permits & contractor licensing in Tasmania
- Contractor license: Builders and trades must be licensed or registered in Tasmania, and most states require home warranty insurance above a contract value.
- Building code: Work must comply with the National Construction Code (NCC) and Australian Standards.
- Permits: Building approval comes from your council or a private building certifier.
Rules vary by city — always confirm with your local building department before work starts.
Labor rates for this project in Tasmania
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Cement mason / concrete finisher | 42 | A$45.37 | A$90.74 |
| Construction laborer | 24 | A$37.04 | A$74.08 |
- Labor wages: Australian Bureau of Statistics (ABS), Average Weekly Earnings — construction industry, adjusted by state — data period May 2026, last checked November 21, 2026.
- Material prices & exchange rate: North American average material prices converted with European Central Bank reference rates (Frankfurter API) and a regional price factor — data period 2026-11-20, last checked November 21, 2026.
What a concrete driveway & slab includes
Concrete flatwork costs depend on area, thickness, reinforcement and finish. A compacted gravel base, forms, ready-mix delivery and finishing labor are included; stamped and colored finishes add materials and time.
Main cost factors
- Area and thickness
- Reinforcement
- Decorative finish
- Removing old concrete
- Access for the truck
How to save money
- 5–6 inches thickness for driveways with heavy vehicles.
- Small pours under ~8 cubic yards pay a short-load fee — combine projects.
- Seal the concrete after curing to prevent salt and stain damage.
- Control joints every 8–12 ft prevent random cracks.
Timeline
2–4 days, plus 7 days before driving on it.
Permits
Driveway and curb-cut permits are common; check before pouring.
Frequently asked questions
How much does a concrete driveway & slab cost in Tasmania?
A typical concrete driveway & slab in Tasmania costs about A$16,719, with most projects between A$14,713 and A$19,227. That is about A$225 per m².
How much of the cost is labor?
Labor is about 47% of the direct cost (66 work hours) for a typical project in Tasmania. Materials are A$5,329 and equipment, disposal and permits A$1,061, before contingency, contractor overhead and tax.
Is a concrete driveway & slab cheaper in Tasmania than in nearby regions?
A typical concrete driveway & slab costs A$16,719 in Tasmania. Among nearby regions, Victoria is the lowest at A$17,209. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in Tasmania?
Builders and trades must be licensed or registered in Tasmania, and most states require home warranty insurance above a contract value.
How long does a concrete driveway & slab take?
2–4 days, plus 7 days before driving on it.
Do I need a permit for a concrete driveway & slab?
Driveway and curb-cut permits are common; check before pouring.
How many cubic yards do I need?
The breakdown shows the volume for your size and thickness with 6% extra.
Concrete or pavers?
Concrete is cheaper per square foot; pavers are easier to repair.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Concrete Driveway & Slab cost in other states
Compare concrete driveway & slab costs in every state, province and territory →