Swimming Pool Cost Calculator — Tasmania

Average swimming pool cost in Tasmania: A$136,313 (typical range A$119,955–A$156,760, A$2,866 per m² of water surface). Enter your own sizes below for an itemized estimate. Updated November 2026

Loading calculator…

Free · No obligation

Get up to 3 free quotes from Tasmania pros

  • Compare real prices with your estimate
  • Local, licensed and insured contractors
  • Takes 30 seconds — your estimate is attached

How much does a swimming pool cost in Tasmania?

Based on current Tasmania labor rates and material prices, a typical swimming pool costs about A$136,313. Most projects fall between A$119,955 and A$156,760, or roughly A$2,866 per m² of water surface. This example assumes: pool size 9.8 m × 4.9 m, water surface 48 m², volume 72,479 L, type Concrete / gunite.

Cost by project size

Project sizeEstimated cost
7.3 × 3.7 mA$110,193
9.8 × 4.9 mA$136,313
12 × 6.1 mA$166,172

Where the money goes

  • Pool structureA$48,871 (50%)
  • Design, permits & excavationA$15,448 (16%)
  • Plumbing & equipmentA$11,357 (12%)
  • Safety fence & gateA$8,515 (9%)
  • Pool deckA$7,685 (8%)
  • ElectricalA$4,279 (4%)
  • Start-upA$1,807 (2%)

Materials A$52,259 · Labor A$31,599 (340 hours) · Equipment, disposal & permits A$14,103 — before contingency, contractor overhead & profit and tax.

Tasmania vs. Australia average

A typical swimming pool in Tasmania costs 2% less than the Australia average (A$136,313 vs. A$139,351). The difference comes mainly from local wages — a carpenter earns on average A$46.29 per hour in Tasmania — and from regional material prices and GST of 10%.

Swimming Pool in Tasmania: local factors

Tasmania ranks 7th of 8 states and territories for swimming pool cost (1 = most expensive) — among the most affordable.

Nearby regionTypical costvs. Tasmania
TasmaniaA$136,313—
VictoriaA$137,467+1%

Permits & contractor licensing in Tasmania

  • Contractor license: Builders and trades must be licensed or registered in Tasmania, and most states require home warranty insurance above a contract value.
  • Building code: Work must comply with the National Construction Code (NCC) and Australian Standards.
  • Permits: Building approval comes from your council or a private building certifier.

Rules vary by city — always confirm with your local building department before work starts.

Labor rates for this project in Tasmania

TradeHoursAvg. wage / hourInstalled rate / hour
Cement mason / concrete finisher114A$45.37A$90.74
Brick / block mason58A$47.22A$94.44
Ironworker / welder40A$50.92A$101.84
Construction laborer32A$37.04A$74.08
Plumber32A$52.78A$105.56
Fence erector26A$39.35A$78.70
Equipment operator22A$50.00A$100.00
Electrician16A$53.70A$107.40
  • Labor wages: Australian Bureau of Statistics (ABS), Average Weekly Earnings — construction industry, adjusted by state — data period May 2026, last checked November 21, 2026.
  • Material prices & exchange rate: North American average material prices converted with European Central Bank reference rates (Frankfurter API) and a regional price factor — data period 2026-11-20, last checked November 21, 2026.

What a swimming pool includes

An in-ground pool includes design and permits, excavation and haul-off, the pool structure, plumbing and equipment, electrical bonding, coping and tile, a deck and a code-compliant safety fence. Concrete pools are the most flexible and most expensive; fiberglass is fastest to install.

Main cost factors

  • Pool type and size
  • Depth and shape
  • Heater and automation
  • Deck area and material
  • Safety fencing

How to save money

  • A simple rectangle costs less than a freeform shape with many curves.
  • A variable-speed pump pays for itself in lower electricity bills.
  • A heat pump is cheaper to run than a gas heater in warm climates.
  • Budget for fencing, landscaping and higher insurance.

Timeline

6–12 weeks for concrete; 3–5 weeks for fiberglass.

Permits

A pool permit, electrical permit and a compliant barrier/fence are required almost everywhere.

Frequently asked questions

How much does a swimming pool cost in Tasmania?

A typical swimming pool in Tasmania costs about A$136,313, with most projects between A$119,955 and A$156,760. That is about A$2,866 per m² of water surface.

How much of the cost is labor?

Labor is about 32% of the direct cost (340 work hours) for a typical project in Tasmania. Materials are A$52,259 and equipment, disposal and permits A$14,103, before contingency, contractor overhead and tax.

Is a swimming pool cheaper in Tasmania than in nearby regions?

A typical swimming pool costs A$136,313 in Tasmania. Among nearby regions, Victoria is the lowest at A$137,467. Differences come mostly from local wages, material prices and taxes.

Do I need a licensed contractor in Tasmania?

Builders and trades must be licensed or registered in Tasmania, and most states require home warranty insurance above a contract value.

How long does a swimming pool take?

6–12 weeks for concrete; 3–5 weeks for fiberglass.

Do I need a permit for a swimming pool?

A pool permit, electrical permit and a compliant barrier/fence are required almost everywhere.

Concrete, vinyl or fiberglass — which is cheapest?

Vinyl liner pools usually have the lowest upfront cost, concrete the highest. Switch the pool type in the calculator to compare.

What does a pool cost to maintain?

Plan for chemicals, electricity, and periodic resurfacing or liner replacement.

Can I change the contractor markup or contingency?

Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.

Swimming Pool cost in other states

Compare swimming pool costs in every state, province and territory →

More cost calculators for Tasmania

Choose your location

NSW New South WalesVIC VictoriaQLD QueenslandSA South AustraliaWA Western AustraliaTAS TasmaniaNT Northern TerritoryACT Australian Capital Territory