Wood & Vinyl Fence Cost Calculator — Tasmania

Average wood & vinyl fence cost in Tasmania: A$11,229 (typical range A$9,882–A$12,913, A$246 per metre). Enter your own sizes below for an itemized estimate. Updated November 2026

Loading calculator…

Free · No obligation

Get up to 3 free quotes from Tasmania pros

  • Compare real prices with your estimate
  • Local, licensed and insured contractors
  • Takes 30 seconds — your estimate is attached

How much does a wood & vinyl fence cost in Tasmania?

Based on current Tasmania labor rates and material prices, a typical wood & vinyl fence costs about A$11,229. Most projects fall between A$9,882 and A$12,913, or roughly A$246 per metre. This example assumes: length 45.7 m, height 1.8 m, material Pressure-treated pine, posts 21.

Cost by project size

Project sizeEstimated cost
23 mA$6,503
46 mA$11,229
91 mA$20,844

Where the money goes

  • Rails & panelsA$5,005 (62%)
  • Posts & footingsA$1,992 (25%)
  • GatesA$543 (7%)
  • Permit & utility locateA$530 (7%)

Materials A$3,632 · Labor A$4,262 (54 hours) · Equipment, disposal & permits A$176 — before contingency, contractor overhead & profit and tax.

Tasmania vs. Australia average

A typical wood & vinyl fence in Tasmania costs 5% less than the Australia average (A$11,229 vs. A$11,842). The difference comes mainly from local wages — a carpenter earns on average A$46.29 per hour in Tasmania — and from regional material prices and GST of 10%.

Wood & Vinyl Fence in Tasmania: local factors

Tasmania ranks 8th of 8 states and territories for wood & vinyl fence cost (1 = most expensive) — among the most affordable.

Nearby regionTypical costvs. Tasmania
TasmaniaA$11,229—
VictoriaA$11,654+4%

What affects the price in Tasmania

  • Bushfire-prone areas: Your block’s BAL rating (AS 3959) sets the required materials: BAL-29 and above need ember screens, toughened glass and non-combustible cladding/decking.

Permits & contractor licensing in Tasmania

  • Contractor license: Builders and trades must be licensed or registered in Tasmania, and most states require home warranty insurance above a contract value.
  • Building code: Work must comply with the National Construction Code (NCC) and Australian Standards.
  • Permits: Building approval comes from your council or a private building certifier.

Rules vary by city — always confirm with your local building department before work starts.

Labor rates for this project in Tasmania

TradeHoursAvg. wage / hourInstalled rate / hour
Fence erector54A$39.35A$78.70
  • Labor wages: Australian Bureau of Statistics (ABS), Average Weekly Earnings — construction industry, adjusted by state — data period May 2026, last checked November 21, 2026.
  • Material prices & exchange rate: North American average material prices converted with European Central Bank reference rates (Frankfurter API) and a regional price factor — data period 2026-11-20, last checked November 21, 2026.

What a wood & vinyl fence includes

Fence cost is driven by length, height, material and gates. Posts set in concrete every 8 ft, rails and pickets or panels make up the materials; labor is mostly digging and setting posts.

Main cost factors

  • Fence length and height
  • Material (pine, cedar, vinyl)
  • Style
  • Number of gates
  • Old fence removal

How to save money

  • Pressure-treated pine is the cheapest; cedar resists rot naturally.
  • Vinyl costs more up front but never needs staining.
  • Share the cost with neighbors on property-line fences.
  • Call your utility locate service before digging.

Timeline

2–4 days for 150 ft.

Permits

Many cities require a permit for fences over 6 ft; HOAs may have style rules.

Frequently asked questions

How much does a wood & vinyl fence cost in Tasmania?

A typical wood & vinyl fence in Tasmania costs about A$11,229, with most projects between A$9,882 and A$12,913. That is about A$246 per metre.

How much of the cost is labor?

Labor is about 53% of the direct cost (54 work hours) for a typical project in Tasmania. Materials are A$3,632 and equipment, disposal and permits A$176, before contingency, contractor overhead and tax.

Is a wood & vinyl fence cheaper in Tasmania than in nearby regions?

A typical wood & vinyl fence costs A$11,229 in Tasmania. Among nearby regions, Victoria is the lowest at A$11,654. Differences come mostly from local wages, material prices and taxes.

Do I need a licensed contractor in Tasmania?

Builders and trades must be licensed or registered in Tasmania, and most states require home warranty insurance above a contract value.

What local conditions affect wood & vinyl fence costs in Tasmania?

Your block’s BAL rating (AS 3959) sets the required materials: BAL-29 and above need ember screens, toughened glass and non-combustible cladding/decking.

How long does a wood & vinyl fence take?

2–4 days for 150 ft.

Do I need a permit for a wood & vinyl fence?

Many cities require a permit for fences over 6 ft; HOAs may have style rules.

How much does a fence cost per foot?

See the cost per linear foot (or metre) under the total.

How long does a wood fence last?

10–15 years for treated pine, 15–20 for cedar with regular sealing.

Can I change the contractor markup or contingency?

Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.

Wood & Vinyl Fence cost in other states

Compare wood & vinyl fence costs in every state, province and territory →

More cost calculators for Tasmania

Choose your location

NSW New South WalesVIC VictoriaQLD QueenslandSA South AustraliaWA Western AustraliaTAS TasmaniaNT Northern TerritoryACT Australian Capital Territory