Iron & Metal Fence Cost Calculator — Pennsylvania

Average iron & metal fence cost in Pennsylvania: $15,324 (typical range $13,485–$17,623, $102 per linear foot). Enter your own sizes below for an itemized estimate. Updated November 2026

Loading calculator…

Free · No obligation

Get up to 3 free quotes from Pennsylvania pros

  • Compare real prices with your estimate
  • Local, licensed and insured contractors
  • Takes 30 seconds — your estimate is attached

How much does a iron & metal fence cost in Pennsylvania?

Based on current Pennsylvania labor rates and material prices, a typical iron & metal fence costs about $15,324. Most projects fall between $13,485 and $17,623, or roughly $102 per linear foot. This example assumes: type Wrought iron / ornamental steel, length 150 ft, height 5 ft, gates 1 walk / 0 drive.

Cost by project size

Project sizeEstimated cost
75 ft$8,708
150 ft$15,324
300 ft$29,102

Where the money goes

  • Fence materials$10,660 (91%)
  • Gates & automation$662 (6%)
  • Permit & layout$359 (3%)

Materials $9,127 · Labor $2,419 (48 hours) · Equipment, disposal & permits $134 — before contingency, contractor overhead & profit and tax.

Pennsylvania vs. United States average

A typical iron & metal fence in Pennsylvania costs 3% more than the United States average ($15,324 vs. $14,917). The difference comes mainly from local wages — a carpenter earns on average $30.39 per hour in Pennsylvania — and from regional material prices and Sales tax (materials) of 6%.

Iron & Metal Fence in Pennsylvania: local factors

Pennsylvania ranks 16th of 51 states for iron & metal fence cost (1 = most expensive) — among the most expensive.

Nearby stateTypical costvs. Pennsylvania
Pennsylvania$15,324—
Delaware$14,585-5%
Maryland$15,233-1%
New Jersey$16,541+8%
New York$16,549+8%
Ohio$14,811-3%
West Virginia$14,381-6%

What affects the price in Pennsylvania

  • Moderate frost: Posts and footings typically go 24–42 in. (0.6–1.1 m) deep to stay below the frost line.

Permits & contractor licensing in Pennsylvania

  • Contractor license: Home improvement contractors who do more than $5,000 of work a year must register with the Pennsylvania Attorney General (Home Improvement Consumer Protection Act), and contracts over $500 must be in writing.
  • Building code: The Pennsylvania Uniform Construction Code (UCC) applies statewide and is enforced by the municipality or its third-party inspection agency.
  • Permits: Apply with your municipality (or its code agency). Philadelphia issues permits through the Department of Licenses and Inspections.

Verify a contractor: Pennsylvania Office of Attorney General – Home Improvement ↗. Rules change — always confirm with your local building department.

Labor rates for this project in Pennsylvania

TradeHoursAvg. wage / hourInstalled rate / hour
Fence erector48$24.99$49.98
  • Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
  • Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.

What a iron & metal fence includes

Metal fences range from budget chain link to ornamental aluminum and wrought iron. Driveway gates and automatic openers can cost as much as the fence itself.

Main cost factors

  • Fence type
  • Length and height
  • Walk and driveway gates
  • Automatic gate opener
  • Finish (galvanized, powder coat)

How to save money

  • Chain link is the cheapest way to enclose a large yard.
  • Aluminum looks like iron but never rusts and costs less.
  • Powder-coated steel lasts much longer than painted steel.
  • Sliding gates suit sloped driveways; swing gates are cheaper on flat ground.

Timeline

2–5 days, plus 2–4 weeks for custom gates.

Permits

Permits are often required for fences over 6 ft and for electrical work on gate openers.

Frequently asked questions

How much does a iron & metal fence cost in Pennsylvania?

A typical iron & metal fence in Pennsylvania costs about $15,324, with most projects between $13,485 and $17,623. That is about $102 per linear foot.

How much of the cost is labor?

Labor is about 21% of the direct cost (48 work hours) for a typical project in Pennsylvania. Materials are $9,127 and equipment, disposal and permits $134, before contingency, contractor overhead and tax.

Is a iron & metal fence cheaper in Pennsylvania than in nearby states?

A typical iron & metal fence costs $15,324 in Pennsylvania. Among nearby states, West Virginia is the lowest at $14,381 and New York the highest at $16,549. Differences come mostly from local wages, material prices and taxes.

Do I need a licensed contractor in Pennsylvania?

Home improvement contractors who do more than $5,000 of work a year must register with the Pennsylvania Attorney General (Home Improvement Consumer Protection Act), and contracts over $500 must be in writing.

What local conditions affect iron & metal fence costs in Pennsylvania?

Posts and footings typically go 24–42 in. (0.6–1.1 m) deep to stay below the frost line.

How long does a iron & metal fence take?

2–5 days, plus 2–4 weeks for custom gates.

Do I need a permit for a iron & metal fence?

Permits are often required for fences over 6 ft and for electrical work on gate openers.

Is wrought iron more expensive than aluminum?

Yes — compare both by switching the fence type above.

How much does an automatic gate opener cost?

Turn on “Automatic gate opener” to see opener, safety and wiring costs.

Can I change the contractor markup or contingency?

Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.

Iron & Metal Fence cost in other states

Compare iron & metal fence costs in every state, province and territory →

More cost calculators for Pennsylvania

Choose your location

AL AlabamaAK AlaskaAZ ArizonaAR ArkansasCA CaliforniaCO ColoradoCT ConnecticutDE DelawareDC District of ColumbiaFL FloridaGA GeorgiaHI HawaiiID IdahoIL IllinoisIN IndianaIA IowaKS KansasKY KentuckyLA LouisianaME MaineMD MarylandMA MassachusettsMI MichiganMN MinnesotaMS MississippiMO MissouriMT MontanaNE NebraskaNV NevadaNH New HampshireNJ New JerseyNM New MexicoNY New YorkNC North CarolinaND North DakotaOH OhioOK OklahomaOR OregonPA PennsylvaniaRI Rhode IslandSC South CarolinaSD South DakotaTN TennesseeTX TexasUT UtahVT VermontVA VirginiaWA WashingtonWV West VirginiaWI WisconsinWY Wyoming