Electrical Rewiring & Panel Cost Calculator — Pennsylvania
Average electrical rewiring & panel cost in Pennsylvania: $29,881 (typical range $26,295–$34,363, $17 per sq ft). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
How much does a electrical rewiring & panel cost in Pennsylvania?
Based on current Pennsylvania labor rates and material prices, a typical electrical rewiring & panel costs about $29,881. Most projects fall between $26,295 and $34,363, or roughly $17 per sq ft. This example assumes: home size 1,800 sq ft, scope Full rewire, panel 200 A, ev charger No.
Cost by project size
| Project size | Estimated cost |
|---|---|
| 900 sq ft | $17,697 |
| 1,800 sq ft | $29,881 |
| 3,600 sq ft | $54,249 |
Where the money goes
- Rewiring$14,547 (62%)
- Wall repair$4,212 (18%)
- Service & panel$3,257 (14%)
- Extras$956 (4%)
- Permit & inspection$329 (1%)
Materials $6,754 · Labor $15,994 (230 hours) · Equipment, disposal & permits $553 — before contingency, contractor overhead & profit and tax.
Pennsylvania vs. United States average
A typical electrical rewiring & panel in Pennsylvania costs 4% more than the United States average ($29,881 vs. $28,860). The difference comes mainly from local wages — a carpenter earns on average $30.39 per hour in Pennsylvania — and from regional material prices and Sales tax (materials) of 6%.
Electrical Rewiring & Panel in Pennsylvania: local factors
Pennsylvania ranks 14th of 51 states for electrical rewiring & panel cost (1 = most expensive) — among the most expensive.
| Nearby state | Typical cost | vs. Pennsylvania |
|---|---|---|
| Pennsylvania | $29,881 | — |
| Delaware | $27,629 | -8% |
| Maryland | $29,414 | -2% |
| New Jersey | $34,065 | +14% |
| New York | $32,884 | +10% |
| Ohio | $28,071 | -6% |
| West Virginia | $27,296 | -9% |
Permits & contractor licensing in Pennsylvania
- Contractor license: Home improvement contractors who do more than $5,000 of work a year must register with the Pennsylvania Attorney General (Home Improvement Consumer Protection Act), and contracts over $500 must be in writing.
- Building code: The Pennsylvania Uniform Construction Code (UCC) applies statewide and is enforced by the municipality or its third-party inspection agency.
- Permits: Apply with your municipality (or its code agency). Philadelphia issues permits through the Department of Licenses and Inspections.
Verify a contractor: Pennsylvania Office of Attorney General – Home Improvement ↗. Rules change — always confirm with your local building department.
Labor rates for this project in Pennsylvania
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Electrician | 171 | $36.43 | $72.86 |
| Drywall installer | 60 | $29.80 | $59.60 |
- Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
- Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.
What a electrical rewiring & panel includes
Rewiring includes a new panel and service, new circuits fished through walls, outlets, switches and detectors, plus patching the access holes. Plaster walls take longer than drywall.
Main cost factors
- Home size
- Panel size
- Full or partial rewire
- Wall repair after rewiring
- EV charger
How to save money
- Upgrade to a 200 A panel if you plan an EV charger, heat pump or induction cooking.
- Do rewiring before painting and flooring.
- Add outlets and USB-C receptacles while walls are open.
- Whole-home surge protection is inexpensive insurance.
Timeline
3–10 days for a full rewire.
Permits
Electrical permits and inspections are always required; utility coordination is needed for service upgrades.
Frequently asked questions
How much does a electrical rewiring & panel cost in Pennsylvania?
A typical electrical rewiring & panel in Pennsylvania costs about $29,881, with most projects between $26,295 and $34,363. That is about $17 per sq ft.
How much of the cost is labor?
Labor is about 69% of the direct cost (230 work hours) for a typical project in Pennsylvania. Materials are $6,754 and equipment, disposal and permits $553, before contingency, contractor overhead and tax.
Is a electrical rewiring & panel cheaper in Pennsylvania than in nearby states?
A typical electrical rewiring & panel costs $29,881 in Pennsylvania. Among nearby states, West Virginia is the lowest at $27,296 and New Jersey the highest at $34,065. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in Pennsylvania?
Home improvement contractors who do more than $5,000 of work a year must register with the Pennsylvania Attorney General (Home Improvement Consumer Protection Act), and contracts over $500 must be in writing.
How long does a electrical rewiring & panel take?
3–10 days for a full rewire.
Do I need a permit for a electrical rewiring & panel?
Electrical permits and inspections are always required; utility coordination is needed for service upgrades.
Do I need to rewire an old house?
Homes with knob-and-tube, aluminum branch wiring or a fuse box are strong candidates.
How much does a panel upgrade cost?
Choose “Panel upgrade only” to see just the panel and service cost.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Electrical Rewiring & Panel cost in other states
Compare electrical rewiring & panel costs in every state, province and territory →