HVAC Replacement Cost Calculator — New Hampshire
Average hvac replacement cost in New Hampshire: $14,177 (typical range $12,476–$16,304, $7 per sq ft). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from New Hampshire pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a hvac replacement cost in New Hampshire?
Based on current New Hampshire labor rates and material prices, a typical hvac replacement costs about $14,177. Most projects fall between $12,476 and $16,304, or roughly $7 per sq ft. This example assumes: home size 2,000 sq ft, capacity 3.5 ton, system Gas furnace + central AC, efficiency High (16–17 SEER2 / 96% AFUE).
Cost by project size
| Project size | Estimated cost |
|---|---|
| 1,000 sq ft | $12,373 |
| 2,000 sq ft | $14,177 |
| 4,000 sq ft | $18,841 |
Where the money goes
- Equipment$7,523 (67%)
- Installation$2,547 (23%)
- Ductwork$889 (8%)
- Permit$249 (2%)
Materials $8,223 · Labor $2,453 (36 hours) · Equipment, disposal & permits $531 — before contingency, contractor overhead & profit and tax.
New Hampshire vs. United States average
A typical hvac replacement in New Hampshire costs 1% more than the United States average ($14,177 vs. $14,027). The difference comes mainly from local wages — a carpenter earns on average $30.82 per hour in New Hampshire — and from regional material prices and Sales tax (materials) of 0%.
HVAC Replacement in New Hampshire: local factors
New Hampshire ranks 21st of 51 states for hvac replacement cost (1 = most expensive) — in the middle.
| Nearby state | Typical cost | vs. New Hampshire |
|---|---|---|
| New Hampshire | $14,177 | — |
| Maine | $14,443 | +2% |
| Massachusetts | $15,573 | +10% |
| Vermont | $14,647 | +3% |
What affects the price in New Hampshire
- Long heating season: Heating is the main load: a high-efficiency furnace or cold-climate heat pump is worth the extra cost; rebates are common.
Permits & contractor licensing in New Hampshire
- Contractor license: Licensing rules in New Hampshire depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
- Building code: Building codes in New Hampshire are based on the International Residential Code, adopted with local amendments.
- Permits: Building permits are issued by your city or county building department.
Rules vary by city — always confirm with your local building department before work starts.
Labor rates for this project in New Hampshire
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| HVAC technician | 32 | $34.37 | $68.74 |
| Electrician | 4 | $31.63 | $63.26 |
- Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
- Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.
What a hvac replacement includes
HVAC cost depends on house size (system tonnage), system type, efficiency and how much ductwork needs work. Heat pumps and high-efficiency systems cost more up front but lower energy bills and often qualify for rebates.
Main cost factors
- Home size (system tonnage)
- System type
- Efficiency rating
- Ductwork condition
- Thermostat and zoning
How to save money
- Ask for a Manual J load calculation instead of sizing by rule of thumb.
- Sealing leaky ducts can save 20% on heating and cooling.
- Check federal, state and utility rebates for heat pumps.
- Replace furnace and AC together so the components match.
Timeline
1–3 days.
Permits
A mechanical permit and inspection are required for equipment replacement.
Frequently asked questions
How much does a hvac replacement cost in New Hampshire?
A typical hvac replacement in New Hampshire costs about $14,177, with most projects between $12,476 and $16,304. That is about $7 per sq ft.
How much of the cost is labor?
Labor is about 22% of the direct cost (36 work hours) for a typical project in New Hampshire. Materials are $8,223 and equipment, disposal and permits $531, before contingency, contractor overhead and tax.
Is a hvac replacement cheaper in New Hampshire than in nearby states?
A typical hvac replacement costs $14,177 in New Hampshire. Among nearby states, Maine is the lowest at $14,443 and Massachusetts the highest at $15,573. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in New Hampshire?
Licensing rules in New Hampshire depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
What local conditions affect hvac replacement costs in New Hampshire?
Heating is the main load: a high-efficiency furnace or cold-climate heat pump is worth the extra cost; rebates are common.
How long does a hvac replacement take?
1–3 days.
Do I need a permit for a hvac replacement?
A mechanical permit and inspection are required for equipment replacement.
What size system do I need?
Roughly 1 ton per 500–600 sq ft — the calculator sizes it from your home area.
Heat pump or furnace + AC?
Heat pumps are more efficient in most climates; switch the system type to compare costs.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
HVAC Replacement cost in other states
Compare hvac replacement costs in every state, province and territory →