Swimming Pool Cost Calculator — New Hampshire
Average swimming pool cost in New Hampshire: $90,217 (typical range $79,391–$103,750, $176 per sq ft of water surface). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from New Hampshire pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a swimming pool cost in New Hampshire?
Based on current New Hampshire labor rates and material prices, a typical swimming pool costs about $90,217. Most projects fall between $79,391 and $103,750, or roughly $176 per sq ft of water surface. This example assumes: pool size 32 ft × 16 ft, water surface 512 sq ft, volume 19,149 gal, type Concrete / gunite.
Cost by project size
| Project size | Estimated cost |
|---|---|
| 24 × 12 ft | $72,848 |
| 32 × 16 ft | $90,217 |
| 40 × 20 ft | $110,062 |
Where the money goes
- Pool structure$35,587 (50%)
- Design, permits & excavation$11,442 (16%)
- Plumbing & equipment$8,199 (11%)
- Safety fence & gate$6,244 (9%)
- Pool deck$5,522 (8%)
- Electrical$2,989 (4%)
- Start-up$1,336 (2%)
Materials $40,353 · Labor $20,075 (340 hours) · Equipment, disposal & permits $10,890 — before contingency, contractor overhead & profit and tax.
New Hampshire vs. United States average
A typical swimming pool in New Hampshire costs 1% less than the United States average ($90,217 vs. $91,082). The difference comes mainly from local wages — a carpenter earns on average $30.82 per hour in New Hampshire — and from regional material prices and Sales tax (materials) of 0%.
Swimming Pool in New Hampshire: local factors
New Hampshire ranks 27th of 51 states for swimming pool cost (1 = most expensive) — in the middle.
| Nearby state | Typical cost | vs. New Hampshire |
|---|---|---|
| New Hampshire | $90,217 | — |
| Maine | $91,212 | +1% |
| Massachusetts | $104,026 | +15% |
| Vermont | $93,616 | +4% |
What affects the price in New Hampshire
- Deep frost: Pools must be winterized every fall, and in-ground pools need freeze protection for plumbing.
Permits & contractor licensing in New Hampshire
- Contractor license: Licensing rules in New Hampshire depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
- Building code: Building codes in New Hampshire are based on the International Residential Code, adopted with local amendments.
- Permits: Building permits are issued by your city or county building department.
Rules vary by city — always confirm with your local building department before work starts.
Labor rates for this project in New Hampshire
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Cement mason / concrete finisher | 114 | $28.16 | $56.32 |
| Brick / block mason | 58 | $31.84 | $63.68 |
| Ironworker / welder | 40 | $33.54 | $67.08 |
| Construction laborer | 32 | $24.87 | $49.74 |
| Plumber | 32 | $31.84 | $63.68 |
| Fence erector | 26 | $24.11 | $48.22 |
| Equipment operator | 22 | $31.63 | $63.26 |
| Electrician | 16 | $31.63 | $63.26 |
- Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
- Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.
What a swimming pool includes
An in-ground pool includes design and permits, excavation and haul-off, the pool structure, plumbing and equipment, electrical bonding, coping and tile, a deck and a code-compliant safety fence. Concrete pools are the most flexible and most expensive; fiberglass is fastest to install.
Main cost factors
- Pool type and size
- Depth and shape
- Heater and automation
- Deck area and material
- Safety fencing
How to save money
- A simple rectangle costs less than a freeform shape with many curves.
- A variable-speed pump pays for itself in lower electricity bills.
- A heat pump is cheaper to run than a gas heater in warm climates.
- Budget for fencing, landscaping and higher insurance.
Timeline
6–12 weeks for concrete; 3–5 weeks for fiberglass.
Permits
A pool permit, electrical permit and a compliant barrier/fence are required almost everywhere.
Frequently asked questions
How much does a swimming pool cost in New Hampshire?
A typical swimming pool in New Hampshire costs about $90,217, with most projects between $79,391 and $103,750. That is about $176 per sq ft of water surface.
How much of the cost is labor?
Labor is about 28% of the direct cost (340 work hours) for a typical project in New Hampshire. Materials are $40,353 and equipment, disposal and permits $10,890, before contingency, contractor overhead and tax.
Is a swimming pool cheaper in New Hampshire than in nearby states?
A typical swimming pool costs $90,217 in New Hampshire. Among nearby states, Maine is the lowest at $91,212 and Massachusetts the highest at $104,026. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in New Hampshire?
Licensing rules in New Hampshire depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
What local conditions affect swimming pool costs in New Hampshire?
Pools must be winterized every fall, and in-ground pools need freeze protection for plumbing.
How long does a swimming pool take?
6–12 weeks for concrete; 3–5 weeks for fiberglass.
Do I need a permit for a swimming pool?
A pool permit, electrical permit and a compliant barrier/fence are required almost everywhere.
Concrete, vinyl or fiberglass — which is cheapest?
Vinyl liner pools usually have the lowest upfront cost, concrete the highest. Switch the pool type in the calculator to compare.
What does a pool cost to maintain?
Plan for chemicals, electricity, and periodic resurfacing or liner replacement.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Swimming Pool cost in other states
Compare swimming pool costs in every state, province and territory →