Iron & Metal Fence Cost Calculator — New Hampshire
Average iron & metal fence cost in New Hampshire: $14,784 (typical range $13,010–$17,002, $99 per linear foot). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from New Hampshire pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a iron & metal fence cost in New Hampshire?
Based on current New Hampshire labor rates and material prices, a typical iron & metal fence costs about $14,784. Most projects fall between $13,010 and $17,002, or roughly $99 per linear foot. This example assumes: type Wrought iron / ornamental steel, length 150 ft, height 5 ft, gates 1 walk / 0 drive.
Cost by project size
| Project size | Estimated cost |
|---|---|
| 75 ft | $8,405 |
| 150 ft | $14,784 |
| 300 ft | $28,069 |
Where the money goes
- Fence materials$10,671 (91%)
- Gates & automation$663 (6%)
- Permit & layout$353 (3%)
Materials $9,217 · Labor $2,334 (48 hours) · Equipment, disposal & permits $136 — before contingency, contractor overhead & profit and tax.
New Hampshire vs. United States average
A typical iron & metal fence in New Hampshire costs 1% less than the United States average ($14,784 vs. $14,917). The difference comes mainly from local wages — a carpenter earns on average $30.82 per hour in New Hampshire — and from regional material prices and Sales tax (materials) of 0%.
Iron & Metal Fence in New Hampshire: local factors
New Hampshire ranks 24th of 51 states for iron & metal fence cost (1 = most expensive) — in the middle.
| Nearby state | Typical cost | vs. New Hampshire |
|---|---|---|
| New Hampshire | $14,784 | — |
| Maine | $15,266 | +3% |
| Massachusetts | $16,708 | +13% |
| Vermont | $15,395 | +4% |
What affects the price in New Hampshire
- Deep frost: Posts and footings must go below the frost line — usually 42–60 in. (1.1–1.5 m) here — which means more digging and concrete per post.
Permits & contractor licensing in New Hampshire
- Contractor license: Licensing rules in New Hampshire depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
- Building code: Building codes in New Hampshire are based on the International Residential Code, adopted with local amendments.
- Permits: Building permits are issued by your city or county building department.
Rules vary by city — always confirm with your local building department before work starts.
Labor rates for this project in New Hampshire
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Fence erector | 48 | $24.11 | $48.22 |
- Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
- Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.
What a iron & metal fence includes
Metal fences range from budget chain link to ornamental aluminum and wrought iron. Driveway gates and automatic openers can cost as much as the fence itself.
Main cost factors
- Fence type
- Length and height
- Walk and driveway gates
- Automatic gate opener
- Finish (galvanized, powder coat)
How to save money
- Chain link is the cheapest way to enclose a large yard.
- Aluminum looks like iron but never rusts and costs less.
- Powder-coated steel lasts much longer than painted steel.
- Sliding gates suit sloped driveways; swing gates are cheaper on flat ground.
Timeline
2–5 days, plus 2–4 weeks for custom gates.
Permits
Permits are often required for fences over 6 ft and for electrical work on gate openers.
Frequently asked questions
How much does a iron & metal fence cost in New Hampshire?
A typical iron & metal fence in New Hampshire costs about $14,784, with most projects between $13,010 and $17,002. That is about $99 per linear foot.
How much of the cost is labor?
Labor is about 20% of the direct cost (48 work hours) for a typical project in New Hampshire. Materials are $9,217 and equipment, disposal and permits $136, before contingency, contractor overhead and tax.
Is a iron & metal fence cheaper in New Hampshire than in nearby states?
A typical iron & metal fence costs $14,784 in New Hampshire. Among nearby states, Maine is the lowest at $15,266 and Massachusetts the highest at $16,708. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in New Hampshire?
Licensing rules in New Hampshire depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
What local conditions affect iron & metal fence costs in New Hampshire?
Posts and footings must go below the frost line — usually 42–60 in. (1.1–1.5 m) here — which means more digging and concrete per post.
How long does a iron & metal fence take?
2–5 days, plus 2–4 weeks for custom gates.
Do I need a permit for a iron & metal fence?
Permits are often required for fences over 6 ft and for electrical work on gate openers.
Is wrought iron more expensive than aluminum?
Yes — compare both by switching the fence type above.
How much does an automatic gate opener cost?
Turn on “Automatic gate opener” to see opener, safety and wiring costs.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Iron & Metal Fence cost in other states
Compare iron & metal fence costs in every state, province and territory →