Block Wall Fence Cost Calculator — New Hampshire
Average block wall fence cost in New Hampshire: $21,452 (typical range $18,878–$24,670, $215 per linear foot). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from New Hampshire pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a block wall fence cost in New Hampshire?
Based on current New Hampshire labor rates and material prices, a typical block wall fence costs about $21,452. Most projects fall between $18,878 and $24,670, or roughly $215 per linear foot. This example assumes: length 100 ft, height 6 ft, blocks 709, face area 600 sq ft.
Cost by project size
| Project size | Estimated cost |
|---|---|
| 50 ft | $12,459 |
| 100 ft | $21,452 |
| 200 ft | $39,922 |
Where the money goes
- Block wall$10,439 (62%)
- Excavation & footing$4,402 (26%)
- Gates$856 (5%)
- Permit & engineering$734 (4%)
- Cap & finish$528 (3%)
Materials $6,551 · Labor $8,731 (152 hours) · Equipment, disposal & permits $1,676 — before contingency, contractor overhead & profit and tax.
New Hampshire vs. United States average
A typical block wall fence in New Hampshire costs 1% less than the United States average ($21,452 vs. $21,702). The difference comes mainly from local wages — a carpenter earns on average $30.82 per hour in New Hampshire — and from regional material prices and Sales tax (materials) of 0%.
Block Wall Fence in New Hampshire: local factors
New Hampshire ranks 23rd of 51 states for block wall fence cost (1 = most expensive) — in the middle.
| Nearby state | Typical cost | vs. New Hampshire |
|---|---|---|
| New Hampshire | $21,452 | — |
| Maine | $20,100 | -6% |
| Massachusetts | $27,186 | +27% |
| Vermont | $21,514 | 0% |
What affects the price in New Hampshire
- Deep frost: Posts and footings must go below the frost line — usually 42–60 in. (1.1–1.5 m) here — which means more digging and concrete per post.
Permits & contractor licensing in New Hampshire
- Contractor license: Licensing rules in New Hampshire depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
- Building code: Building codes in New Hampshire are based on the International Residential Code, adopted with local amendments.
- Permits: Building permits are issued by your city or county building department.
Rules vary by city — always confirm with your local building department before work starts.
Labor rates for this project in New Hampshire
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Brick / block mason | 75 | $31.84 | $63.68 |
| Construction laborer | 65 | $24.87 | $49.74 |
| Cement mason / concrete finisher | 8 | $28.16 | $56.32 |
| Ironworker / welder | 4 | $33.54 | $67.08 |
- Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
- Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.
What a block wall fence includes
A concrete block (CMU) wall needs a reinforced footing, vertical rebar grouted into the cells, horizontal reinforcement, mortar and a cap. Stucco or paint finish adds cost and life. Walls over 4 ft often need engineering.
Main cost factors
- Wall length and height
- Block type
- Footing and rebar
- Pilasters and cap
- Stucco or paint finish
How to save money
- Closer rebar spacing is required in high-wind and seismic areas.
- Split-face block looks finished without stucco.
- Pilasters every 10–16 ft stiffen tall walls.
- Plan drainage behind walls that hold back soil.
Timeline
1–3 weeks depending on length.
Permits
Walls over 4 ft (or retaining walls) usually need a permit and engineered design.
Frequently asked questions
How much does a block wall fence cost in New Hampshire?
A typical block wall fence in New Hampshire costs about $21,452, with most projects between $18,878 and $24,670. That is about $215 per linear foot.
How much of the cost is labor?
Labor is about 51% of the direct cost (152 work hours) for a typical project in New Hampshire. Materials are $6,551 and equipment, disposal and permits $1,676, before contingency, contractor overhead and tax.
Is a block wall fence cheaper in New Hampshire than in nearby states?
A typical block wall fence costs $21,452 in New Hampshire. Among nearby states, Maine is the lowest at $20,100 and Massachusetts the highest at $27,186. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in New Hampshire?
Licensing rules in New Hampshire depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
What local conditions affect block wall fence costs in New Hampshire?
Posts and footings must go below the frost line — usually 42–60 in. (1.1–1.5 m) here — which means more digging and concrete per post.
How long does a block wall fence take?
1–3 weeks depending on length.
Do I need a permit for a block wall fence?
Walls over 4 ft (or retaining walls) usually need a permit and engineered design.
How many blocks do I need?
The breakdown shows the block count (wall face area ÷ 0.89 sq ft per block + 5%).
Block wall or wood fence?
Block walls cost more but last 50+ years and block noise.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Block Wall Fence cost in other states
Compare block wall fence costs in every state, province and territory →