Paver Patio Cost Calculator — New Hampshire
Average paver patio cost in New Hampshire: $6,302 (typical range $5,546–$7,247, $21 per sq ft). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from New Hampshire pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a paver patio cost in New Hampshire?
Based on current New Hampshire labor rates and material prices, a typical paver patio costs about $6,302. Most projects fall between $5,546 and $7,247, or roughly $21 per sq ft. This example assumes: patio area 300 sq ft, paver Concrete pavers, base 6".
Cost by project size
| Project size | Estimated cost |
|---|---|
| 150 sq ft | $3,562 |
| 300 sq ft | $6,302 |
| 600 sq ft | $12,234 |
Where the money goes
- Pavers$2,775 (56%)
- Excavation$1,161 (23%)
- Base$1,045 (21%)
Materials $2,381 · Labor $1,635 (41 hours) · Equipment, disposal & permits $966 — before contingency, contractor overhead & profit and tax.
New Hampshire vs. United States average
A typical paver patio in New Hampshire costs 0% less than the United States average ($6,302 vs. $6,312). The difference comes mainly from local wages — a carpenter earns on average $30.82 per hour in New Hampshire — and from regional material prices and Sales tax (materials) of 0%.
Paver Patio in New Hampshire: local factors
New Hampshire ranks 22nd of 51 states for paver patio cost (1 = most expensive) — in the middle.
| Nearby state | Typical cost | vs. New Hampshire |
|---|---|---|
| New Hampshire | $6,302 | — |
| Maine | $6,415 | +2% |
| Massachusetts | $7,187 | +14% |
| Vermont | $6,443 | +2% |
What affects the price in New Hampshire
- Snow loads: Freeze–thaw cycles and de-icing salts call for air-entrained concrete, control joints and a thicker compacted base.
Permits & contractor licensing in New Hampshire
- Contractor license: Licensing rules in New Hampshire depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
- Building code: Building codes in New Hampshire are based on the International Residential Code, adopted with local amendments.
- Permits: Building permits are issued by your city or county building department.
Rules vary by city — always confirm with your local building department before work starts.
Labor rates for this project in New Hampshire
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Landscaper / hardscape | 41 | $20.18 | $40.36 |
- Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
- Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.
What a paver patio includes
A paver patio is mostly excavation and base work: geotextile, crushed gravel, bedding sand, then the pavers, edge restraint and polymeric joint sand. A good base is what keeps pavers level for decades.
Main cost factors
- Patio area
- Paver type
- Base depth
- Borders and edging
- Steps or seat walls
How to save money
- Do not skimp on base depth on clay soils.
- Simple running-bond patterns waste less paver material.
- Permeable pavers can reduce storm-water fees in some cities.
- Seat walls and steps add the most cost per square foot.
Timeline
2–5 days.
Permits
Usually not required for ground-level patios; check lot coverage rules.
Frequently asked questions
How much does a paver patio cost in New Hampshire?
A typical paver patio in New Hampshire costs about $6,302, with most projects between $5,546 and $7,247. That is about $21 per sq ft.
How much of the cost is labor?
Labor is about 33% of the direct cost (41 work hours) for a typical project in New Hampshire. Materials are $2,381 and equipment, disposal and permits $966, before contingency, contractor overhead and tax.
Is a paver patio cheaper in New Hampshire than in nearby states?
A typical paver patio costs $6,302 in New Hampshire. Among nearby states, Maine is the lowest at $6,415 and Massachusetts the highest at $7,187. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in New Hampshire?
Licensing rules in New Hampshire depend on the trade and the size of the job. Electricians and plumbers are licensed in almost every state — always ask for a license number and proof of insurance.
What local conditions affect paver patio costs in New Hampshire?
Freeze–thaw cycles and de-icing salts call for air-entrained concrete, control joints and a thicker compacted base.
How long does a paver patio take?
2–5 days.
Do I need a permit for a paver patio?
Usually not required for ground-level patios; check lot coverage rules.
How much base gravel do I need?
See the “Base” category for cubic yards for your base depth.
How long do paver patios last?
25–50 years with occasional re-sanding of joints.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Paver Patio cost in other states
Compare paver patio costs in every state, province and territory →