Whole-Home Renovation Cost Calculator — Northern Territory

Average whole-home renovation cost in Northern Territory: A$174,967 (typical range A$153,971–A$201,212, A$1,712 per m²). Enter your own sizes below for an itemized estimate. Updated November 2026

Loading calculator…

Free · No obligation

Get up to 3 free quotes from Northern Territory pros

  • Compare real prices with your estimate
  • Local, licensed and insured contractors
  • Takes 30 seconds — your estimate is attached

How much does a whole-home renovation cost in Northern Territory?

Based on current Northern Territory labor rates and material prices, a typical whole-home renovation costs about A$174,967. Most projects fall between A$153,971 and A$201,212, or roughly A$1,712 per m². This example assumes: floor area 102 m², rooms 4, bathrooms 2, condition Bare shell (new build, nothing inside).

Cost by finish level

Finish levelEstimated costTypical range
Economy (budget)A$146,800A$129,184 – A$168,820
Standard (mid-range)A$174,967A$153,971 – A$201,212
Premium (high-end)A$243,998A$214,718 – A$280,598

Cost by project size

Project sizeEstimated cost
56 m², 2 rooms, 1 bathroomsA$105,807
102 m², 4 rooms, 2 bathroomsA$174,967
186 m², 6 rooms, 3 bathroomsA$271,603

Where the money goes

  • Bathroom & kitchen fixturesA$26,408 (21%)
  • Wall plastering & floor screedA$15,391 (12%)
  • Partition wallsA$13,827 (11%)
  • TileA$12,690 (10%)
  • Electrical wiringA$9,634 (8%)
  • PaintingA$9,306 (7%)
  • Electrical fixtures & lightingA$7,563 (6%)
  • FlooringA$6,633 (5%)

Materials A$58,577 · Labor A$60,950 (604 hours) · Equipment, disposal & permits A$6,213 — before contingency, contractor overhead & profit and tax.

Northern Territory vs. Australia average

A typical whole-home renovation in Northern Territory costs 4% more than the Australia average (A$174,967 vs. A$167,765). The difference comes mainly from local wages — a carpenter earns on average A$49.75 per hour in Northern Territory — and from regional material prices and GST of 10%.

Whole-Home Renovation in Northern Territory: local factors

Northern Territory ranks 3rd of 8 states and territories for whole-home renovation cost (1 = most expensive) — among the most expensive.

Nearby regionTypical costvs. Northern Territory
Northern TerritoryA$174,967—
Western AustraliaA$176,970+1%
South AustraliaA$160,621-8%
QueenslandA$164,363-6%

Permits & contractor licensing in Northern Territory

  • Contractor license: Builders and trades must be licensed or registered in Northern Territory, and most states require home warranty insurance above a contract value.
  • Building code: Work must comply with the National Construction Code (NCC) and Australian Standards.
  • Permits: Building approval comes from your council or a private building certifier.

Rules vary by city — always confirm with your local building department before work starts.

Labor rates for this project in Northern Territory

TradeHoursAvg. wage / hourInstalled rate / hour
Brick / block mason99A$50.74A$101.48
Electrician98A$57.71A$115.42
Drywall installer94A$47.26A$94.52
Tile & stone setter83A$48.75A$97.50
Painter80A$43.78A$87.56
Plumber67A$56.71A$113.42
Carpenter39A$49.75A$99.50
Floor layer22A$46.27A$92.54
Cement mason / concrete finisher22A$48.75A$97.50
  • Labor wages: Australian Bureau of Statistics (ABS), Average Weekly Earnings — construction industry, adjusted by state — data period May 2026, last checked November 21, 2026.
  • Material prices & exchange rate: North American average material prices converted with European Central Bank reference rates (Frankfurter API) and a regional price factor — data period 2026-11-20, last checked November 21, 2026.

What a whole-home renovation includes

A whole-home renovation covers everything inside: walls, electrical and plumbing rough-in, heating, plaster, screed, drywall, waterproofing, tile, paint, flooring, doors, lighting and bathroom fixtures. Starting from a bare shell costs the most; a cosmetic refresh the least.

Main cost factors

  • Floor area and number of rooms
  • Starting condition (shell, dated, good)
  • Number of bathrooms
  • Finish package
  • Electrical, plumbing and heating scope

How to save money

  • Finish all “wet” work (plaster, screed, tile) before flooring and paint.
  • Buy tile, flooring and doors early — delivery delays stop the whole job.
  • Keep 10% of the budget for surprises behind walls.
  • Electrical and plumbing points are cheaper to add before plastering than later.

Timeline

2–4 months for a 1,000–1,500 sq ft home or apartment.

Permits

Electrical, plumbing and any wall changes need permits; cosmetic work usually does not.

Frequently asked questions

How much does a whole-home renovation cost in Northern Territory?

A typical whole-home renovation in Northern Territory costs about A$174,967, with most projects between A$153,971 and A$201,212. Economy finishes start around A$146,800 and premium projects reach A$243,998. That is about A$1,712 per m².

How much of the cost is labor?

Labor is about 48% of the direct cost (604 work hours) for a typical project in Northern Territory. Materials are A$58,577 and equipment, disposal and permits A$6,213, before contingency, contractor overhead and tax.

Is a whole-home renovation cheaper in Northern Territory than in nearby regions?

A typical whole-home renovation costs A$174,967 in Northern Territory. Among nearby regions, South Australia is the lowest at A$160,621 and Western Australia the highest at A$176,970. Differences come mostly from local wages, material prices and taxes.

Do I need a licensed contractor in Northern Territory?

Builders and trades must be licensed or registered in Northern Territory, and most states require home warranty insurance above a contract value.

How long does a whole-home renovation take?

2–4 months for a 1,000–1,500 sq ft home or apartment.

Do I need a permit for a whole-home renovation?

Electrical, plumbing and any wall changes need permits; cosmetic work usually does not.

How much does it cost to renovate per square foot?

See the cost per square foot under the total. It depends mostly on the starting condition and finish package.

What should I renovate first?

Infrastructure first (wiring, plumbing, heating, windows), then walls and floors, then finishes and fixtures.

Can I change the contractor markup or contingency?

Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.

Whole-Home Renovation cost in other states

Compare whole-home renovation costs in every state, province and territory →

More cost calculators for Northern Territory

Choose your location

NSW New South WalesVIC VictoriaQLD QueenslandSA South AustraliaWA Western AustraliaTAS TasmaniaNT Northern TerritoryACT Australian Capital Territory