Concrete Driveway & Slab Cost Calculator — Northern Territory

Average concrete driveway & slab cost in Northern Territory: A$18,309 (typical range A$16,112–A$21,055, A$246 per m²). Enter your own sizes below for an itemized estimate. Updated November 2026

Loading calculator…

Free · No obligation

Get up to 3 free quotes from Northern Territory pros

  • Compare real prices with your estimate
  • Local, licensed and insured contractors
  • Takes 30 seconds — your estimate is attached

How much does a concrete driveway & slab cost in Northern Territory?

Based on current Northern Territory labor rates and material prices, a typical concrete driveway & slab costs about A$18,309. Most projects fall between A$16,112 and A$21,055, or roughly A$246 per m². This example assumes: size 12.2 m × 6.1 m, area 74 m², concrete 8.0 m³, thickness 4".

Cost by project size

Project sizeEstimated cost
6.1 × 3 mA$5,663
7.3 × 7.3 mA$13,959
12 × 6.1 mA$18,309
15 × 7.3 mA$27,001

Where the money goes

  • ConcreteA$8,794 (67%)
  • Base & formsA$4,119 (31%)
  • PermitA$244 (2%)

Materials A$5,932 · Labor A$6,044 (66 hours) · Equipment, disposal & permits A$1,181 — before contingency, contractor overhead & profit and tax.

Northern Territory vs. Australia average

A typical concrete driveway & slab in Northern Territory costs 5% more than the Australia average (A$18,309 vs. A$17,473). The difference comes mainly from local wages — a carpenter earns on average A$49.75 per hour in Northern Territory — and from regional material prices and GST of 10%.

Concrete Driveway & Slab in Northern Territory: local factors

Northern Territory ranks 3rd of 8 states and territories for concrete driveway & slab cost (1 = most expensive) — among the most expensive.

Nearby regionTypical costvs. Northern Territory
Northern TerritoryA$18,309—
Western AustraliaA$18,418+1%
South AustraliaA$16,740-9%
QueenslandA$17,119-6%

Permits & contractor licensing in Northern Territory

  • Contractor license: Builders and trades must be licensed or registered in Northern Territory, and most states require home warranty insurance above a contract value.
  • Building code: Work must comply with the National Construction Code (NCC) and Australian Standards.
  • Permits: Building approval comes from your council or a private building certifier.

Rules vary by city — always confirm with your local building department before work starts.

Labor rates for this project in Northern Territory

TradeHoursAvg. wage / hourInstalled rate / hour
Cement mason / concrete finisher42A$48.75A$97.50
Construction laborer24A$39.80A$79.60
  • Labor wages: Australian Bureau of Statistics (ABS), Average Weekly Earnings — construction industry, adjusted by state — data period May 2026, last checked November 21, 2026.
  • Material prices & exchange rate: North American average material prices converted with European Central Bank reference rates (Frankfurter API) and a regional price factor — data period 2026-11-20, last checked November 21, 2026.

What a concrete driveway & slab includes

Concrete flatwork costs depend on area, thickness, reinforcement and finish. A compacted gravel base, forms, ready-mix delivery and finishing labor are included; stamped and colored finishes add materials and time.

Main cost factors

  • Area and thickness
  • Reinforcement
  • Decorative finish
  • Removing old concrete
  • Access for the truck

How to save money

  • 5–6 inches thickness for driveways with heavy vehicles.
  • Small pours under ~8 cubic yards pay a short-load fee — combine projects.
  • Seal the concrete after curing to prevent salt and stain damage.
  • Control joints every 8–12 ft prevent random cracks.

Timeline

2–4 days, plus 7 days before driving on it.

Permits

Driveway and curb-cut permits are common; check before pouring.

Frequently asked questions

How much does a concrete driveway & slab cost in Northern Territory?

A typical concrete driveway & slab in Northern Territory costs about A$18,309, with most projects between A$16,112 and A$21,055. That is about A$246 per m².

How much of the cost is labor?

Labor is about 46% of the direct cost (66 work hours) for a typical project in Northern Territory. Materials are A$5,932 and equipment, disposal and permits A$1,181, before contingency, contractor overhead and tax.

Is a concrete driveway & slab cheaper in Northern Territory than in nearby regions?

A typical concrete driveway & slab costs A$18,309 in Northern Territory. Among nearby regions, South Australia is the lowest at A$16,740 and Western Australia the highest at A$18,418. Differences come mostly from local wages, material prices and taxes.

Do I need a licensed contractor in Northern Territory?

Builders and trades must be licensed or registered in Northern Territory, and most states require home warranty insurance above a contract value.

How long does a concrete driveway & slab take?

2–4 days, plus 7 days before driving on it.

Do I need a permit for a concrete driveway & slab?

Driveway and curb-cut permits are common; check before pouring.

How many cubic yards do I need?

The breakdown shows the volume for your size and thickness with 6% extra.

Concrete or pavers?

Concrete is cheaper per square foot; pavers are easier to repair.

Can I change the contractor markup or contingency?

Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.

Concrete Driveway & Slab cost in other states

Compare concrete driveway & slab costs in every state, province and territory →

More cost calculators for Northern Territory

Choose your location

NSW New South WalesVIC VictoriaQLD QueenslandSA South AustraliaWA Western AustraliaTAS TasmaniaNT Northern TerritoryACT Australian Capital Territory