Electrical Rewiring & Panel Cost Calculator — Northern Territory

Average electrical rewiring & panel cost in Northern Territory: A$50,067 (typical range A$44,059–A$57,577, A$299 per m²). Enter your own sizes below for an itemized estimate. Updated November 2026

Loading calculator…

Free · No obligation

Get up to 3 free quotes from Northern Territory pros

  • Compare real prices with your estimate
  • Local, licensed and insured contractors
  • Takes 30 seconds — your estimate is attached

How much does a electrical rewiring & panel cost in Northern Territory?

Based on current Northern Territory labor rates and material prices, a typical electrical rewiring & panel costs about A$50,067. Most projects fall between A$44,059 and A$57,577, or roughly A$299 per m². This example assumes: home size 167 m², scope Full rewire, panel 200 A, ev charger No.

Cost by project size

Project sizeEstimated cost
84 m²A$29,439
167 m²A$50,067
334 m²A$91,323

Where the money goes

  • RewiringA$22,595 (63%)
  • Wall repairA$6,593 (18%)
  • Service & panelA$4,873 (14%)
  • ExtrasA$1,441 (4%)
  • Permit & inspectionA$479 (1%)

Materials A$9,833 · Labor A$25,343 (230 hours) · Equipment, disposal & permits A$805 — before contingency, contractor overhead & profit and tax.

Northern Territory vs. Australia average

A typical electrical rewiring & panel in Northern Territory costs 0% less than the Australia average (A$50,067 vs. A$49,952). The difference comes mainly from local wages — a carpenter earns on average A$49.75 per hour in Northern Territory — and from regional material prices and GST of 10%.

Electrical Rewiring & Panel in Northern Territory: local factors

Northern Territory ranks 4th of 8 states and territories for electrical rewiring & panel cost (1 = most expensive) — in the middle.

Nearby regionTypical costvs. Northern Territory
Northern TerritoryA$50,067—
Western AustraliaA$53,014+6%
South AustraliaA$47,560-5%
QueenslandA$48,925-2%

Permits & contractor licensing in Northern Territory

  • Contractor license: Builders and trades must be licensed or registered in Northern Territory, and most states require home warranty insurance above a contract value.
  • Building code: Work must comply with the National Construction Code (NCC) and Australian Standards.
  • Permits: Building approval comes from your council or a private building certifier.

Rules vary by city — always confirm with your local building department before work starts.

Labor rates for this project in Northern Territory

TradeHoursAvg. wage / hourInstalled rate / hour
Electrician171A$57.71A$115.42
Drywall installer60A$47.26A$94.52
  • Labor wages: Australian Bureau of Statistics (ABS), Average Weekly Earnings — construction industry, adjusted by state — data period May 2026, last checked November 21, 2026.
  • Material prices & exchange rate: North American average material prices converted with European Central Bank reference rates (Frankfurter API) and a regional price factor — data period 2026-11-20, last checked November 21, 2026.

What a electrical rewiring & panel includes

Rewiring includes a new panel and service, new circuits fished through walls, outlets, switches and detectors, plus patching the access holes. Plaster walls take longer than drywall.

Main cost factors

  • Home size
  • Panel size
  • Full or partial rewire
  • Wall repair after rewiring
  • EV charger

How to save money

  • Upgrade to a 200 A panel if you plan an EV charger, heat pump or induction cooking.
  • Do rewiring before painting and flooring.
  • Add outlets and USB-C receptacles while walls are open.
  • Whole-home surge protection is inexpensive insurance.

Timeline

3–10 days for a full rewire.

Permits

Electrical permits and inspections are always required; utility coordination is needed for service upgrades.

Frequently asked questions

How much does a electrical rewiring & panel cost in Northern Territory?

A typical electrical rewiring & panel in Northern Territory costs about A$50,067, with most projects between A$44,059 and A$57,577. That is about A$299 per m².

How much of the cost is labor?

Labor is about 70% of the direct cost (230 work hours) for a typical project in Northern Territory. Materials are A$9,833 and equipment, disposal and permits A$805, before contingency, contractor overhead and tax.

Is a electrical rewiring & panel cheaper in Northern Territory than in nearby regions?

A typical electrical rewiring & panel costs A$50,067 in Northern Territory. Among nearby regions, South Australia is the lowest at A$47,560 and Western Australia the highest at A$53,014. Differences come mostly from local wages, material prices and taxes.

Do I need a licensed contractor in Northern Territory?

Builders and trades must be licensed or registered in Northern Territory, and most states require home warranty insurance above a contract value.

How long does a electrical rewiring & panel take?

3–10 days for a full rewire.

Do I need a permit for a electrical rewiring & panel?

Electrical permits and inspections are always required; utility coordination is needed for service upgrades.

Do I need to rewire an old house?

Homes with knob-and-tube, aluminum branch wiring or a fuse box are strong candidates.

How much does a panel upgrade cost?

Choose “Panel upgrade only” to see just the panel and service cost.

Can I change the contractor markup or contingency?

Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.

Electrical Rewiring & Panel cost in other states

Compare electrical rewiring & panel costs in every state, province and territory →

More cost calculators for Northern Territory

Choose your location

NSW New South WalesVIC VictoriaQLD QueenslandSA South AustraliaWA Western AustraliaTAS TasmaniaNT Northern TerritoryACT Australian Capital Territory