Paver Patio Cost Calculator — Northern Territory

Average paver patio cost in Northern Territory: A$11,200 (typical range A$9,856–A$12,880, A$402 per m²). Enter your own sizes below for an itemized estimate. Updated November 2026

Loading calculator…

Free · No obligation

Get up to 3 free quotes from Northern Territory pros

  • Compare real prices with your estimate
  • Local, licensed and insured contractors
  • Takes 30 seconds — your estimate is attached

How much does a paver patio cost in Northern Territory?

Based on current Northern Territory labor rates and material prices, a typical paver patio costs about A$11,200. Most projects fall between A$9,856 and A$12,880, or roughly A$402 per m². This example assumes: patio area 28 m², paver Concrete pavers, base 6".

Cost by project size

Project sizeEstimated cost
14 m²A$6,252
28 m²A$11,200
56 m²A$21,815

Where the money goes

  • PaversA$4,515 (56%)
  • ExcavationA$1,835 (23%)
  • BaseA$1,699 (21%)

Materials A$3,433 · Labor A$3,224 (41 hours) · Equipment, disposal & permits A$1,392 — before contingency, contractor overhead & profit and tax.

Northern Territory vs. Australia average

A typical paver patio in Northern Territory costs 6% more than the Australia average (A$11,200 vs. A$10,572). The difference comes mainly from local wages — a carpenter earns on average A$49.75 per hour in Northern Territory — and from regional material prices and GST of 10%.

Paver Patio in Northern Territory: local factors

Northern Territory ranks 1st of 8 states and territories for paver patio cost (1 = most expensive) — among the most expensive.

Nearby regionTypical costvs. Northern Territory
Northern TerritoryA$11,200—
Western AustraliaA$11,125-1%
South AustraliaA$10,145-9%
QueenslandA$10,358-8%

Permits & contractor licensing in Northern Territory

  • Contractor license: Builders and trades must be licensed or registered in Northern Territory, and most states require home warranty insurance above a contract value.
  • Building code: Work must comply with the National Construction Code (NCC) and Australian Standards.
  • Permits: Building approval comes from your council or a private building certifier.

Rules vary by city — always confirm with your local building department before work starts.

Labor rates for this project in Northern Territory

TradeHoursAvg. wage / hourInstalled rate / hour
Landscaper / hardscape41A$39.80A$79.60
  • Labor wages: Australian Bureau of Statistics (ABS), Average Weekly Earnings — construction industry, adjusted by state — data period May 2026, last checked November 21, 2026.
  • Material prices & exchange rate: North American average material prices converted with European Central Bank reference rates (Frankfurter API) and a regional price factor — data period 2026-11-20, last checked November 21, 2026.

What a paver patio includes

A paver patio is mostly excavation and base work: geotextile, crushed gravel, bedding sand, then the pavers, edge restraint and polymeric joint sand. A good base is what keeps pavers level for decades.

Main cost factors

  • Patio area
  • Paver type
  • Base depth
  • Borders and edging
  • Steps or seat walls

How to save money

  • Do not skimp on base depth on clay soils.
  • Simple running-bond patterns waste less paver material.
  • Permeable pavers can reduce storm-water fees in some cities.
  • Seat walls and steps add the most cost per square foot.

Timeline

2–5 days.

Permits

Usually not required for ground-level patios; check lot coverage rules.

Frequently asked questions

How much does a paver patio cost in Northern Territory?

A typical paver patio in Northern Territory costs about A$11,200, with most projects between A$9,856 and A$12,880. That is about A$402 per m².

How much of the cost is labor?

Labor is about 40% of the direct cost (41 work hours) for a typical project in Northern Territory. Materials are A$3,433 and equipment, disposal and permits A$1,392, before contingency, contractor overhead and tax.

Is a paver patio cheaper in Northern Territory than in nearby regions?

A typical paver patio costs A$11,200 in Northern Territory. Among nearby regions, South Australia is the lowest at A$10,145 and Western Australia the highest at A$11,125. Differences come mostly from local wages, material prices and taxes.

Do I need a licensed contractor in Northern Territory?

Builders and trades must be licensed or registered in Northern Territory, and most states require home warranty insurance above a contract value.

How long does a paver patio take?

2–5 days.

Do I need a permit for a paver patio?

Usually not required for ground-level patios; check lot coverage rules.

How much base gravel do I need?

See the “Base” category for cubic yards for your base depth.

How long do paver patios last?

25–50 years with occasional re-sanding of joints.

Can I change the contractor markup or contingency?

Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.

Paver Patio cost in other states

Compare paver patio costs in every state, province and territory →

More cost calculators for Northern Territory

Choose your location

NSW New South WalesVIC VictoriaQLD QueenslandSA South AustraliaWA Western AustraliaTAS TasmaniaNT Northern TerritoryACT Australian Capital Territory