Whole-Home Renovation Cost Calculator (2026)

The average whole-home renovation in the U.S. costs about $104,819 (typical range $92,241–$120,542). Prices below use national average wages — choose your state or province for local labor rates and taxes. Updated November 2026

Loading calculator…

Whole-Home Renovation cost by state — United States (USD)

Most expensive: Hawaii ($138,972), Alaska ($129,474), Washington ($121,646). Least expensive: Arkansas ($89,643), Mississippi ($90,527), Alabama ($91,035).

StateTypical costRangeUnit price
Alabama$91,035$80,111 – $104,690$83 per sq ft
Alaska$129,474$113,937 – $148,895$118 per sq ft
Arizona$99,488$87,549 – $114,411$90 per sq ft
Arkansas$89,643$78,886 – $103,089$81 per sq ft
California$118,158$103,979 – $135,882$107 per sq ft
Colorado$103,659$91,220 – $119,208$94 per sq ft
Connecticut$112,125$98,670 – $128,944$102 per sq ft
Delaware$101,984$89,746 – $117,282$93 per sq ft
District of Columbia$117,207$103,142 – $134,788$107 per sq ft
Florida$95,897$84,389 – $110,282$87 per sq ft
Georgia$95,218$83,792 – $109,501$87 per sq ft
Hawaii$138,972$122,295 – $159,818$126 per sq ft
Idaho$98,483$86,665 – $113,255$90 per sq ft
Illinois$118,938$104,665 – $136,779$108 per sq ft
Indiana$102,345$90,064 – $117,697$93 per sq ft
Iowa$100,473$88,416 – $115,544$91 per sq ft
Kansas$98,407$86,598 – $113,168$89 per sq ft
Kentucky$96,416$84,846 – $110,878$88 per sq ft
Louisiana$94,627$83,272 – $108,821$86 per sq ft
Maine$106,865$94,041 – $122,895$97 per sq ft
Maryland$103,804$91,348 – $119,375$94 per sq ft
Massachusetts$121,262$106,711 – $139,451$110 per sq ft
Michigan$104,232$91,724 – $119,867$95 per sq ft
Minnesota$114,430$100,698 – $131,595$104 per sq ft
Mississippi$90,527$79,664 – $104,106$82 per sq ft
Missouri$104,619$92,065 – $120,312$95 per sq ft
Montana$102,442$90,149 – $117,808$93 per sq ft
Nebraska$97,929$86,178 – $112,618$89 per sq ft
Nevada$107,965$95,009 – $124,160$98 per sq ft
New Hampshire$102,809$90,472 – $118,230$93 per sq ft
New Jersey$119,449$105,115 – $137,366$109 per sq ft
New Mexico$95,629$84,154 – $109,973$87 per sq ft
New York$118,979$104,702 – $136,826$108 per sq ft
North Carolina$91,963$80,927 – $105,757$84 per sq ft
North Dakota$101,953$89,719 – $117,246$93 per sq ft
Ohio$102,687$90,365 – $118,090$93 per sq ft
Oklahoma$93,390$82,183 – $107,399$85 per sq ft
Oregon$114,212$100,507 – $131,344$104 per sq ft
Pennsylvania$108,443$95,430 – $124,709$99 per sq ft
Rhode Island$109,261$96,150 – $125,650$99 per sq ft
South Carolina$94,281$82,967 – $108,423$86 per sq ft
South Dakota$96,623$85,028 – $111,116$88 per sq ft
Tennessee$95,984$84,466 – $110,382$87 per sq ft
Texas$94,778$83,405 – $108,995$86 per sq ft
Utah$98,760$86,909 – $113,574$90 per sq ft
Vermont$105,362$92,719 – $121,166$96 per sq ft
Virginia$98,639$86,802 – $113,435$90 per sq ft
Washington$121,646$107,048 – $139,893$111 per sq ft
West Virginia$96,549$84,963 – $111,031$88 per sq ft
Wisconsin$107,646$94,728 – $123,793$98 per sq ft
Wyoming$100,691$88,608 – $115,795$92 per sq ft

Whole-Home Renovation cost by province — Canada (CAD)

Most expensive: Nunavut (C$211,563), Northwest Territories (C$188,164), Yukon (C$178,252). Least expensive: Prince Edward Island (C$141,022), Manitoba (C$141,330), Saskatchewan (C$142,703).

ProvinceTypical costRangeUnit price
AlbertaC$143,238C$126,049 – C$164,724C$130 per sq ft
British ColumbiaC$160,191C$140,968 – C$184,220C$146 per sq ft
ManitobaC$141,330C$124,370 – C$162,530C$128 per sq ft
New BrunswickC$144,038C$126,753 – C$165,644C$131 per sq ft
Newfoundland and LabradorC$153,609C$135,176 – C$176,650C$140 per sq ft
Nova ScotiaC$148,074C$130,305 – C$170,285C$135 per sq ft
OntarioC$154,578C$136,029 – C$177,765C$141 per sq ft
Prince Edward IslandC$141,022C$124,099 – C$162,175C$128 per sq ft
QuebecC$156,465C$137,689 – C$179,935C$142 per sq ft
SaskatchewanC$142,703C$125,579 – C$164,108C$130 per sq ft
YukonC$178,252C$156,862 – C$204,990C$162 per sq ft
Northwest TerritoriesC$188,164C$165,584 – C$216,389C$171 per sq ft
NunavutC$211,563C$186,175 – C$243,297C$192 per sq ft

Whole-Home Renovation cost by state — Australia (AUD)

Most expensive: Australian Capital Territory (A$177,354), Western Australia (A$176,970), Northern Territory (A$174,967). Least expensive: Tasmania (A$159,914), South Australia (A$160,621), Queensland (A$164,363).

StateTypical costRangeUnit price
New South WalesA$169,598A$149,246 – A$195,038A$1,660 per m²
VictoriaA$165,186A$145,364 – A$189,964A$1,616 per m²
QueenslandA$164,363A$144,639 – A$189,017A$1,608 per m²
South AustraliaA$160,621A$141,346 – A$184,714A$1,572 per m²
Western AustraliaA$176,970A$155,734 – A$203,516A$1,732 per m²
TasmaniaA$159,914A$140,724 – A$183,901A$1,565 per m²
Northern TerritoryA$174,967A$153,971 – A$201,212A$1,712 per m²
Australian Capital TerritoryA$177,354A$156,072 – A$203,957A$1,735 per m²

How much does a whole-home renovation cost in the U.S.?

Based on current the U.S. labor rates and material prices, a typical whole-home renovation costs about $104,819. Most projects fall between $92,241 and $120,542, or roughly $95 per sq ft. This example assumes: floor area 1,100 sq ft, rooms 4, bathrooms 2, condition Bare shell (new build, nothing inside).

Cost by finish level

Finish levelEstimated costTypical range
Economy (budget)$86,879$76,454 – $99,911
Standard (mid-range)$104,819$92,241 – $120,542
Premium (high-end)$148,786$130,932 – $171,104

Cost by project size

Project sizeEstimated cost
600 sq ft, 2 rooms, 1 bathrooms$63,553
1,100 sq ft, 4 rooms, 2 bathrooms$104,819
2,000 sq ft, 6 rooms, 3 bathrooms$162,441

Where the money goes

  • Bathroom & kitchen fixtures$17,574 (22%)
  • Wall plastering & floor screed$10,013 (12%)
  • Partition walls$9,046 (11%)
  • Tile$7,908 (10%)
  • Electrical wiring$5,890 (7%)
  • Painting$5,811 (7%)
  • Electrical fixtures & lighting$4,813 (6%)
  • Flooring$4,401 (5%)

Materials $39,449 · Labor $37,637 (604 hours) · Equipment, disposal & permits $4,184 — before contingency, contractor overhead & profit and tax.

Labor rates for this project in the U.S. (national average)

TradeHoursAvg. wage / hourInstalled rate / hour
Brick / block mason99$32.83$65.66
Electrician98$34.37$68.74
Drywall installer94$30.58$61.16
Tile & stone setter83$28.49$56.98
Painter80$26.64$53.28
Plumber67$34.70$69.40
Carpenter39$31.55$63.10
Floor layer22$29.69$59.38
Cement mason / concrete finisher22$28.87$57.74
  • Labor wages: U.S. Bureau of Labor Statistics (BLS), Occupational Employment and Wage Statistics — state hourly mean wage by trade — data period May 2025, last checked November 21, 2026.
  • Material price index: U.S. BLS Producer Price Index — inputs to construction industries (WPUSI012011), monthly — data period October 2026, last checked November 21, 2026.

What a whole-home renovation includes

A whole-home renovation covers everything inside: walls, electrical and plumbing rough-in, heating, plaster, screed, drywall, waterproofing, tile, paint, flooring, doors, lighting and bathroom fixtures. Starting from a bare shell costs the most; a cosmetic refresh the least.

Main cost factors

  • Floor area and number of rooms
  • Starting condition (shell, dated, good)
  • Number of bathrooms
  • Finish package
  • Electrical, plumbing and heating scope

How to save money

  • Finish all “wet” work (plaster, screed, tile) before flooring and paint.
  • Buy tile, flooring and doors early — delivery delays stop the whole job.
  • Keep 10% of the budget for surprises behind walls.
  • Electrical and plumbing points are cheaper to add before plastering than later.

Timeline

2–4 months for a 1,000–1,500 sq ft home or apartment.

Permits

Electrical, plumbing and any wall changes need permits; cosmetic work usually does not.

Frequently asked questions

How much does a whole-home renovation cost in the US?

A typical whole-home renovation in the US costs about $104,819, with most projects between $92,241 and $120,542. Economy finishes start around $86,879 and premium projects reach $148,786. That is about $95 per sq ft.

How much of the cost is labor?

Labor is about 46% of the direct cost (604 work hours) for a typical project in the US. Materials are $39,449 and equipment, disposal and permits $4,184, before contingency, contractor overhead and tax.

How long does a whole-home renovation take?

2–4 months for a 1,000–1,500 sq ft home or apartment.

Do I need a permit for a whole-home renovation?

Electrical, plumbing and any wall changes need permits; cosmetic work usually does not.

How much does it cost to renovate per square foot?

See the cost per square foot under the total. It depends mostly on the starting condition and finish package.

What should I renovate first?

Infrastructure first (wiring, plumbing, heating, windows), then walls and floors, then finishes and fixtures.

Can I change the contractor markup or contingency?

Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.

More cost calculators

Choose your location

AL AlabamaAK AlaskaAZ ArizonaAR ArkansasCA CaliforniaCO ColoradoCT ConnecticutDE DelawareDC District of ColumbiaFL FloridaGA GeorgiaHI HawaiiID IdahoIL IllinoisIN IndianaIA IowaKS KansasKY KentuckyLA LouisianaME MaineMD MarylandMA MassachusettsMI MichiganMN MinnesotaMS MississippiMO MissouriMT MontanaNE NebraskaNV NevadaNH New HampshireNJ New JerseyNM New MexicoNY New YorkNC North CarolinaND North DakotaOH OhioOK OklahomaOR OregonPA PennsylvaniaRI Rhode IslandSC South CarolinaSD South DakotaTN TennesseeTX TexasUT UtahVT VermontVA VirginiaWA WashingtonWV West VirginiaWI WisconsinWY Wyoming