Iron & Metal Fence Cost Calculator — Australian Capital Territory

Average iron & metal fence cost in Australian Capital Territory: A$23,111 (typical range A$20,338–A$26,578, A$505 per metre). Enter your own sizes below for an itemized estimate. Updated November 2026

Loading calculator…

Free · No obligation

Get up to 3 free quotes from Australian Capital Territory pros

  • Compare real prices with your estimate
  • Local, licensed and insured contractors
  • Takes 30 seconds — your estimate is attached

How much does a iron & metal fence cost in Australian Capital Territory?

Based on current Australian Capital Territory labor rates and material prices, a typical iron & metal fence costs about A$23,111. Most projects fall between A$20,338 and A$26,578, or roughly A$505 per metre. This example assumes: type Wrought iron / ornamental steel, length 45.7 m, height 1.5 m, gates 1 walk / 0 drive.

Cost by project size

Project sizeEstimated cost
23 mA$13,186
46 mA$23,111
91 mA$43,778

Where the money goes

  • Fence materialsA$15,064 (91%)
  • Gates & automationA$933 (6%)
  • Permit & layoutA$612 (4%)

Materials A$11,711 · Labor A$4,725 (48 hours) · Equipment, disposal & permits A$172 — before contingency, contractor overhead & profit and tax.

Australian Capital Territory vs. Australia average

A typical iron & metal fence in Australian Capital Territory costs 3% more than the Australia average (A$23,111 vs. A$22,359). The difference comes mainly from local wages — a carpenter earns on average A$57.42 per hour in Australian Capital Territory — and from regional material prices and GST of 10%.

Iron & Metal Fence in Australian Capital Territory: local factors

Australian Capital Territory ranks 3rd of 8 states and territories for iron & metal fence cost (1 = most expensive) — among the most expensive.

Nearby regionTypical costvs. Australian Capital Territory
Australian Capital TerritoryA$23,111—
New South WalesA$22,589-2%

Permits & contractor licensing in Australian Capital Territory

  • Contractor license: Builders and trades must be licensed or registered in Australian Capital Territory, and most states require home warranty insurance above a contract value.
  • Building code: Work must comply with the National Construction Code (NCC) and Australian Standards.
  • Permits: Building approval comes from your council or a private building certifier.

Rules vary by city — always confirm with your local building department before work starts.

Labor rates for this project in Australian Capital Territory

TradeHoursAvg. wage / hourInstalled rate / hour
Fence erector48A$48.81A$97.62
  • Labor wages: Australian Bureau of Statistics (ABS), Average Weekly Earnings — construction industry, adjusted by state — data period May 2026, last checked November 21, 2026.
  • Material prices & exchange rate: North American average material prices converted with European Central Bank reference rates (Frankfurter API) and a regional price factor — data period 2026-11-20, last checked November 21, 2026.

What a iron & metal fence includes

Metal fences range from budget chain link to ornamental aluminum and wrought iron. Driveway gates and automatic openers can cost as much as the fence itself.

Main cost factors

  • Fence type
  • Length and height
  • Walk and driveway gates
  • Automatic gate opener
  • Finish (galvanized, powder coat)

How to save money

  • Chain link is the cheapest way to enclose a large yard.
  • Aluminum looks like iron but never rusts and costs less.
  • Powder-coated steel lasts much longer than painted steel.
  • Sliding gates suit sloped driveways; swing gates are cheaper on flat ground.

Timeline

2–5 days, plus 2–4 weeks for custom gates.

Permits

Permits are often required for fences over 6 ft and for electrical work on gate openers.

Frequently asked questions

How much does a iron & metal fence cost in Australian Capital Territory?

A typical iron & metal fence in Australian Capital Territory costs about A$23,111, with most projects between A$20,338 and A$26,578. That is about A$505 per metre.

How much of the cost is labor?

Labor is about 28% of the direct cost (48 work hours) for a typical project in Australian Capital Territory. Materials are A$11,711 and equipment, disposal and permits A$172, before contingency, contractor overhead and tax.

Is a iron & metal fence cheaper in Australian Capital Territory than in nearby regions?

A typical iron & metal fence costs A$23,111 in Australian Capital Territory. Among nearby regions, New South Wales is the lowest at A$22,589. Differences come mostly from local wages, material prices and taxes.

Do I need a licensed contractor in Australian Capital Territory?

Builders and trades must be licensed or registered in Australian Capital Territory, and most states require home warranty insurance above a contract value.

How long does a iron & metal fence take?

2–5 days, plus 2–4 weeks for custom gates.

Do I need a permit for a iron & metal fence?

Permits are often required for fences over 6 ft and for electrical work on gate openers.

Is wrought iron more expensive than aluminum?

Yes — compare both by switching the fence type above.

How much does an automatic gate opener cost?

Turn on “Automatic gate opener” to see opener, safety and wiring costs.

Can I change the contractor markup or contingency?

Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.

Iron & Metal Fence cost in other states

Compare iron & metal fence costs in every state, province and territory →

More cost calculators for Australian Capital Territory

Choose your location

NSW New South WalesVIC VictoriaQLD QueenslandSA South AustraliaWA Western AustraliaTAS TasmaniaNT Northern TerritoryACT Australian Capital Territory