Paver Patio Cost Calculator — Australian Capital Territory
Average paver patio cost in Australian Capital Territory: A$11,096 (typical range A$9,764–A$12,760, A$398 per m²). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from Australian Capital Territory pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a paver patio cost in Australian Capital Territory?
Based on current Australian Capital Territory labor rates and material prices, a typical paver patio costs about A$11,096. Most projects fall between A$9,764 and A$12,760, or roughly A$398 per m². This example assumes: patio area 28 m², paver Concrete pavers, base 6".
Cost by project size
| Project size | Estimated cost |
|---|---|
| 14 m² | A$6,122 |
| 28 m² | A$11,096 |
| 56 m² | A$21,675 |
Where the money goes
- PaversA$4,501 (56%)
- ExcavationA$1,780 (22%)
- BaseA$1,693 (21%)
Materials A$3,026 · Labor A$3,721 (41 hours) · Equipment, disposal & permits A$1,227 — before contingency, contractor overhead & profit and tax.
Australian Capital Territory vs. Australia average
A typical paver patio in Australian Capital Territory costs 5% more than the Australia average (A$11,096 vs. A$10,572). The difference comes mainly from local wages — a carpenter earns on average A$57.42 per hour in Australian Capital Territory — and from regional material prices and GST of 10%.
Paver Patio in Australian Capital Territory: local factors
Australian Capital Territory ranks 3rd of 8 states and territories for paver patio cost (1 = most expensive) — among the most expensive.
| Nearby region | Typical cost | vs. Australian Capital Territory |
|---|---|---|
| Australian Capital Territory | A$11,096 | — |
| New South Wales | A$10,686 | -4% |
Permits & contractor licensing in Australian Capital Territory
- Contractor license: Builders and trades must be licensed or registered in Australian Capital Territory, and most states require home warranty insurance above a contract value.
- Building code: Work must comply with the National Construction Code (NCC) and Australian Standards.
- Permits: Building approval comes from your council or a private building certifier.
Rules vary by city — always confirm with your local building department before work starts.
Labor rates for this project in Australian Capital Territory
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Landscaper / hardscape | 41 | A$45.94 | A$91.88 |
- Labor wages: Australian Bureau of Statistics (ABS), Average Weekly Earnings — construction industry, adjusted by state — data period May 2026, last checked November 21, 2026.
- Material prices & exchange rate: North American average material prices converted with European Central Bank reference rates (Frankfurter API) and a regional price factor — data period 2026-11-20, last checked November 21, 2026.
What a paver patio includes
A paver patio is mostly excavation and base work: geotextile, crushed gravel, bedding sand, then the pavers, edge restraint and polymeric joint sand. A good base is what keeps pavers level for decades.
Main cost factors
- Patio area
- Paver type
- Base depth
- Borders and edging
- Steps or seat walls
How to save money
- Do not skimp on base depth on clay soils.
- Simple running-bond patterns waste less paver material.
- Permeable pavers can reduce storm-water fees in some cities.
- Seat walls and steps add the most cost per square foot.
Timeline
2–5 days.
Permits
Usually not required for ground-level patios; check lot coverage rules.
Frequently asked questions
How much does a paver patio cost in Australian Capital Territory?
A typical paver patio in Australian Capital Territory costs about A$11,096, with most projects between A$9,764 and A$12,760. That is about A$398 per m².
How much of the cost is labor?
Labor is about 47% of the direct cost (41 work hours) for a typical project in Australian Capital Territory. Materials are A$3,026 and equipment, disposal and permits A$1,227, before contingency, contractor overhead and tax.
Is a paver patio cheaper in Australian Capital Territory than in nearby regions?
A typical paver patio costs A$11,096 in Australian Capital Territory. Among nearby regions, New South Wales is the lowest at A$10,686. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in Australian Capital Territory?
Builders and trades must be licensed or registered in Australian Capital Territory, and most states require home warranty insurance above a contract value.
How long does a paver patio take?
2–5 days.
Do I need a permit for a paver patio?
Usually not required for ground-level patios; check lot coverage rules.
How much base gravel do I need?
See the “Base” category for cubic yards for your base depth.
How long do paver patios last?
25–50 years with occasional re-sanding of joints.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Paver Patio cost in other states
Compare paver patio costs in every state, province and territory →