Iron & Metal Fence Cost Calculator — New South Wales

Average iron & metal fence cost in New South Wales: A$22,589 (typical range A$19,878–A$25,977, A$494 per metre). Enter your own sizes below for an itemized estimate. Updated November 2026

Loading calculator…

Free · No obligation

Get up to 3 free quotes from New South Wales pros

  • Compare real prices with your estimate
  • Local, licensed and insured contractors
  • Takes 30 seconds — your estimate is attached

How much does a iron & metal fence cost in New South Wales?

Based on current New South Wales labor rates and material prices, a typical iron & metal fence costs about A$22,589. Most projects fall between A$19,878 and A$25,977, or roughly A$494 per metre. This example assumes: type Wrought iron / ornamental steel, length 45.7 m, height 1.5 m, gates 1 walk / 0 drive.

Cost by project size

Project sizeEstimated cost
23 mA$12,880
46 mA$22,589
91 mA$42,810

Where the money goes

  • Fence materialsA$14,743 (91%)
  • Gates & automationA$914 (6%)
  • Permit & layoutA$577 (4%)

Materials A$11,711 · Labor A$4,350 (48 hours) · Equipment, disposal & permits A$172 — before contingency, contractor overhead & profit and tax.

New South Wales vs. Australia average

A typical iron & metal fence in New South Wales costs 1% more than the Australia average (A$22,589 vs. A$22,359). The difference comes mainly from local wages — a carpenter earns on average A$52.87 per hour in New South Wales — and from regional material prices and GST of 10%.

Iron & Metal Fence in New South Wales: local factors

New South Wales ranks 4th of 8 states and territories for iron & metal fence cost (1 = most expensive) — in the middle.

Nearby regionTypical costvs. New South Wales
New South WalesA$22,589—
QueenslandA$21,914-3%
VictoriaA$22,078-2%
South AustraliaA$21,556-5%
Australian Capital TerritoryA$23,111+2%

Permits & contractor licensing in New South Wales

  • Contractor license: Builders and trades must be licensed or registered in New South Wales, and most states require home warranty insurance above a contract value.
  • Building code: Work must comply with the National Construction Code (NCC) and Australian Standards.
  • Permits: Building approval comes from your council or a private building certifier.

Rules vary by city — always confirm with your local building department before work starts.

Labor rates for this project in New South Wales

TradeHoursAvg. wage / hourInstalled rate / hour
Fence erector48A$44.94A$89.88
  • Labor wages: Australian Bureau of Statistics (ABS), Average Weekly Earnings — construction industry, adjusted by state — data period May 2026, last checked November 21, 2026.
  • Material prices & exchange rate: North American average material prices converted with European Central Bank reference rates (Frankfurter API) and a regional price factor — data period 2026-11-20, last checked November 21, 2026.

What a iron & metal fence includes

Metal fences range from budget chain link to ornamental aluminum and wrought iron. Driveway gates and automatic openers can cost as much as the fence itself.

Main cost factors

  • Fence type
  • Length and height
  • Walk and driveway gates
  • Automatic gate opener
  • Finish (galvanized, powder coat)

How to save money

  • Chain link is the cheapest way to enclose a large yard.
  • Aluminum looks like iron but never rusts and costs less.
  • Powder-coated steel lasts much longer than painted steel.
  • Sliding gates suit sloped driveways; swing gates are cheaper on flat ground.

Timeline

2–5 days, plus 2–4 weeks for custom gates.

Permits

Permits are often required for fences over 6 ft and for electrical work on gate openers.

Frequently asked questions

How much does a iron & metal fence cost in New South Wales?

A typical iron & metal fence in New South Wales costs about A$22,589, with most projects between A$19,878 and A$25,977. That is about A$494 per metre.

How much of the cost is labor?

Labor is about 27% of the direct cost (48 work hours) for a typical project in New South Wales. Materials are A$11,711 and equipment, disposal and permits A$172, before contingency, contractor overhead and tax.

Is a iron & metal fence cheaper in New South Wales than in nearby regions?

A typical iron & metal fence costs A$22,589 in New South Wales. Among nearby regions, South Australia is the lowest at A$21,556 and Australian Capital Territory the highest at A$23,111. Differences come mostly from local wages, material prices and taxes.

Do I need a licensed contractor in New South Wales?

Builders and trades must be licensed or registered in New South Wales, and most states require home warranty insurance above a contract value.

How long does a iron & metal fence take?

2–5 days, plus 2–4 weeks for custom gates.

Do I need a permit for a iron & metal fence?

Permits are often required for fences over 6 ft and for electrical work on gate openers.

Is wrought iron more expensive than aluminum?

Yes — compare both by switching the fence type above.

How much does an automatic gate opener cost?

Turn on “Automatic gate opener” to see opener, safety and wiring costs.

Can I change the contractor markup or contingency?

Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.

Iron & Metal Fence cost in other states

Compare iron & metal fence costs in every state, province and territory →

More cost calculators for New South Wales

Choose your location

NSW New South WalesVIC VictoriaQLD QueenslandSA South AustraliaWA Western AustraliaTAS TasmaniaNT Northern TerritoryACT Australian Capital Territory