Electrical Rewiring & Panel Cost Calculator — Australian Capital Territory
Average electrical rewiring & panel cost in Australian Capital Territory: A$53,750 (typical range A$47,300–A$61,813, A$321 per m²). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from Australian Capital Territory pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a electrical rewiring & panel cost in Australian Capital Territory?
Based on current Australian Capital Territory labor rates and material prices, a typical electrical rewiring & panel costs about A$53,750. Most projects fall between A$47,300 and A$61,813, or roughly A$321 per m². This example assumes: home size 167 m², scope Full rewire, panel 200 A, ev charger No.
Cost by project size
| Project size | Estimated cost |
|---|---|
| 84 m² | A$31,142 |
| 167 m² | A$53,750 |
| 334 m² | A$98,965 |
Where the money goes
- RewiringA$24,691 (64%)
- Wall repairA$7,346 (19%)
- Service & panelA$4,736 (12%)
- ExtrasA$1,433 (4%)
- Permit & inspectionA$422 (1%)
Materials A$8,666 · Labor A$29,252 (230 hours) · Equipment, disposal & permits A$709 — before contingency, contractor overhead & profit and tax.
Australian Capital Territory vs. Australia average
A typical electrical rewiring & panel in Australian Capital Territory costs 8% more than the Australia average (A$53,750 vs. A$49,952). The difference comes mainly from local wages — a carpenter earns on average A$57.42 per hour in Australian Capital Territory — and from regional material prices and GST of 10%.
Electrical Rewiring & Panel in Australian Capital Territory: local factors
Australian Capital Territory ranks 1st of 8 states and territories for electrical rewiring & panel cost (1 = most expensive) — among the most expensive.
| Nearby region | Typical cost | vs. Australian Capital Territory |
|---|---|---|
| Australian Capital Territory | A$53,750 | — |
| New South Wales | A$50,524 | -6% |
Permits & contractor licensing in Australian Capital Territory
- Contractor license: Builders and trades must be licensed or registered in Australian Capital Territory, and most states require home warranty insurance above a contract value.
- Building code: Work must comply with the National Construction Code (NCC) and Australian Standards.
- Permits: Building approval comes from your council or a private building certifier.
Rules vary by city — always confirm with your local building department before work starts.
Labor rates for this project in Australian Capital Territory
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Electrician | 171 | A$66.61 | A$133.22 |
| Drywall installer | 60 | A$54.55 | A$109.10 |
- Labor wages: Australian Bureau of Statistics (ABS), Average Weekly Earnings — construction industry, adjusted by state — data period May 2026, last checked November 21, 2026.
- Material prices & exchange rate: North American average material prices converted with European Central Bank reference rates (Frankfurter API) and a regional price factor — data period 2026-11-20, last checked November 21, 2026.
What a electrical rewiring & panel includes
Rewiring includes a new panel and service, new circuits fished through walls, outlets, switches and detectors, plus patching the access holes. Plaster walls take longer than drywall.
Main cost factors
- Home size
- Panel size
- Full or partial rewire
- Wall repair after rewiring
- EV charger
How to save money
- Upgrade to a 200 A panel if you plan an EV charger, heat pump or induction cooking.
- Do rewiring before painting and flooring.
- Add outlets and USB-C receptacles while walls are open.
- Whole-home surge protection is inexpensive insurance.
Timeline
3–10 days for a full rewire.
Permits
Electrical permits and inspections are always required; utility coordination is needed for service upgrades.
Frequently asked questions
How much does a electrical rewiring & panel cost in Australian Capital Territory?
A typical electrical rewiring & panel in Australian Capital Territory costs about A$53,750, with most projects between A$47,300 and A$61,813. That is about A$321 per m².
How much of the cost is labor?
Labor is about 76% of the direct cost (230 work hours) for a typical project in Australian Capital Territory. Materials are A$8,666 and equipment, disposal and permits A$709, before contingency, contractor overhead and tax.
Is a electrical rewiring & panel cheaper in Australian Capital Territory than in nearby regions?
A typical electrical rewiring & panel costs A$53,750 in Australian Capital Territory. Among nearby regions, New South Wales is the lowest at A$50,524. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in Australian Capital Territory?
Builders and trades must be licensed or registered in Australian Capital Territory, and most states require home warranty insurance above a contract value.
How long does a electrical rewiring & panel take?
3–10 days for a full rewire.
Do I need a permit for a electrical rewiring & panel?
Electrical permits and inspections are always required; utility coordination is needed for service upgrades.
Do I need to rewire an old house?
Homes with knob-and-tube, aluminum branch wiring or a fuse box are strong candidates.
How much does a panel upgrade cost?
Choose “Panel upgrade only” to see just the panel and service cost.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Electrical Rewiring & Panel cost in other states
Compare electrical rewiring & panel costs in every state, province and territory →