Drywall Installation Cost Calculator — Australian Capital Territory
Average drywall installation cost in Australian Capital Territory: A$10,535 (typical range A$9,271–A$12,115, A$71 per m² of board area). Enter your own sizes below for an itemized estimate. Updated November 2026
Loading calculator…
Get up to 3 free quotes from Australian Capital Territory pros
- Compare real prices with your estimate
- Local, licensed and insured contractors
- Takes 30 seconds — your estimate is attached
How much does a drywall installation cost in Australian Capital Territory?
Based on current Australian Capital Territory labor rates and material prices, a typical drywall installation costs about A$10,535. Most projects fall between A$9,271 and A$12,115, or roughly A$71 per m² of board area. This example assumes: wall area 111 m², ceiling area 37 m², sheets 56, finish Level 4.
Cost by project size
| Project size | Estimated cost |
|---|---|
| 56 m², 19 m² | A$5,272 |
| 111 m², 37 m² | A$10,535 |
| 223 m², 74 m² | A$20,923 |
Where the money goes
- LaborA$5,696 (75%)
- MaterialsA$1,875 (25%)
Materials A$1,875 · Labor A$5,696 (53 hours) · Equipment, disposal & permits A$0 — before contingency, contractor overhead & profit and tax.
Australian Capital Territory vs. Australia average
A typical drywall installation in Australian Capital Territory costs 8% more than the Australia average (A$10,535 vs. A$9,796). The difference comes mainly from local wages — a carpenter earns on average A$57.42 per hour in Australian Capital Territory — and from regional material prices and GST of 10%.
Drywall Installation in Australian Capital Territory: local factors
Australian Capital Territory ranks 1st of 8 states and territories for drywall installation cost (1 = most expensive) — among the most expensive.
| Nearby region | Typical cost | vs. Australian Capital Territory |
|---|---|---|
| Australian Capital Territory | A$10,535 | — |
| New South Wales | A$9,908 | -6% |
Permits & contractor licensing in Australian Capital Territory
- Contractor license: Builders and trades must be licensed or registered in Australian Capital Territory, and most states require home warranty insurance above a contract value.
- Building code: Work must comply with the National Construction Code (NCC) and Australian Standards.
- Permits: Building approval comes from your council or a private building certifier.
Rules vary by city — always confirm with your local building department before work starts.
Labor rates for this project in Australian Capital Territory
| Trade | Hours | Avg. wage / hour | Installed rate / hour |
|---|---|---|---|
| Drywall installer | 45 | A$54.55 | A$109.10 |
| Painter | 8 | A$50.53 | A$101.06 |
- Labor wages: Australian Bureau of Statistics (ABS), Average Weekly Earnings — construction industry, adjusted by state — data period May 2026, last checked November 21, 2026.
- Material prices & exchange rate: North American average material prices converted with European Central Bank reference rates (Frankfurter API) and a regional price factor — data period 2026-11-20, last checked November 21, 2026.
What a drywall installation includes
Drywall cost depends on the board area, board type, ceiling height and finish level. Level 4 is standard for flat paint; level 5 is for gloss paint and critical lighting.
Main cost factors
- Wall and ceiling area
- Board type
- Finish level
- Ceiling height
How to save money
- Use moisture-resistant board in bathrooms and fire-rated board in garages.
- Larger 4×12 sheets mean fewer seams on long walls.
- Hire a separate finisher for high-visibility areas.
- Prime with drywall primer before painting.
Timeline
3–7 days including drying time between coats.
Permits
Usually part of a larger remodel permit; fire-rated assemblies need inspection.
Frequently asked questions
How much does a drywall installation cost in Australian Capital Territory?
A typical drywall installation in Australian Capital Territory costs about A$10,535, with most projects between A$9,271 and A$12,115. That is about A$71 per m² of board area.
How much of the cost is labor?
Labor is about 75% of the direct cost (53 work hours) for a typical project in Australian Capital Territory. Materials are A$1,875 and equipment, disposal and permits A$0, before contingency, contractor overhead and tax.
Is a drywall installation cheaper in Australian Capital Territory than in nearby regions?
A typical drywall installation costs A$10,535 in Australian Capital Territory. Among nearby regions, New South Wales is the lowest at A$9,908. Differences come mostly from local wages, material prices and taxes.
Do I need a licensed contractor in Australian Capital Territory?
Builders and trades must be licensed or registered in Australian Capital Territory, and most states require home warranty insurance above a contract value.
How long does a drywall installation take?
3–7 days including drying time between coats.
Do I need a permit for a drywall installation?
Usually part of a larger remodel permit; fire-rated assemblies need inspection.
How many drywall sheets do I need?
The breakdown shows the sheet count for your wall and ceiling area with 10% extra.
What is the cost per square foot to hang and finish drywall?
See the cost per square foot under the total.
Can I change the contractor markup or contingency?
Yes — open “Contingency & contractor markup” in the calculator. Set overhead & profit to 0% if you manage the project yourself and hire trades directly.
Drywall Installation cost in other states
Compare drywall installation costs in every state, province and territory →